summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* arm: dts: sync am33xx gpio nodes with Linux 5.9-rc7Dario Binacchi2021-02-163-45/+65
| | | | | | | | | Move gpio controller nodes from am33xx.dtsi to am33xx-l4.dtsi. Now both files are more similar to those found in Linux 5.9-rc7. To be fully operational as before it was also necessary to fix the am33xx-clock.dtsi file. It too is now almost the same as the Linux kernel. Signed-off-by: Dario Binacchi <dariobin@libero.it>
* ARM: dts: k3-j7200-common-proc-board-u-boot: Fix broken ethernetVignesh Raghavendra2021-02-161-0/+1
| | | | | | | | | | | | | Since commit 6239cc8c4e ("arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot") ranges have been added to CPSW node which results in U-Boot CPSW driver failing to acquire phy_gmii_sel register range and thus failing to configure GMII mode correctly. Fix this by deleting ranges in -u-boot-dtsi just like its done for other K3 platforms. Fixes: 6239cc8c4e ("arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* image: Adjust the workings of fit_check_format()Simon Glass2021-02-151-1/+1
| | | | | | | | | | | | | | | | | At present this function does not accept a size for the FIT. This means that it must be read from the FIT itself, introducing potential security risk. Update the function to include a size parameter, which can be invalid, in which case fit_check_format() calculates it. For now no callers pass the size, but this can be updated later. Also adjust the return value to an error code so that all the different types of problems can be distinguished by the user. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Bruce Monroe <bruce.monroe@intel.com> Reported-by: Arie Haenel <arie.haenel@intel.com> Reported-by: Julien Lenoir <julien.lenoir@intel.com>
* Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini2021-02-15369-11/+378
|\ | | | | | | - Merge the patch to take <asm/global_data.h> out of <common.h>
| * common: Drop asm/global_data.h from common headerSimon Glass2021-02-02369-11/+378
| | | | | | | | | | | | | | | | | | | | | | | | Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | sh: Remove sh7763rdp boardTom Rini2021-02-151-5/+0
| | | | | | | | | | | | | | | | This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | sh: Remove sh7757lcr boardTom Rini2021-02-155-330/+1
| | | | | | | | | | | | | | | | | | | | This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. As this is the last SH4A board, remove that support as well. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | sh: Remove sh7753evb boardTom Rini2021-02-151-5/+0
| | | | | | | | | | | | | | This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
* | sh: Remove sh7752evb boardTom Rini2021-02-151-5/+0
| | | | | | | | | | | | | | This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
* | sh: Remove r7780mp boardTom Rini2021-02-151-5/+0
| | | | | | | | | | | | | | | | | | This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Patch-cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Patch-cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | sh: Remove MigoR boardTom Rini2021-02-151-5/+0
| | | | | | | | | | | | | | This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
* | ppc: Remove MPC8641HPCN boardTom Rini2021-02-151-7/+0
| | | | | | | | | | | | | | | | | | | | | | This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | ppc: Remove MPC8610HPCD boardTom Rini2021-02-151-6/+0
| | | | | | | | | | | | | | | | | | | | | | This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | ppc: Remove MPC8572DS boardTom Rini2021-02-151-9/+0
| | | | | | | | | | | | | | | | | | | | | | This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | ppc: Remove MPC8544DS boardTom Rini2021-02-151-6/+0
| | | | | | | | | | | | | | | | | | | | | | This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | arm: Remove db-88f6281-bp boardTom Rini2021-02-155-174/+0
| | | | | | | | | | | | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Chris Packham <judge.packham@gmail.com>
* | arm: Remove ls2080a_simu boardTom Rini2021-02-152-14/+1
| | | | | | | | | | | | | | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | arm: Remove mx35pdk boardTom Rini2021-02-151-6/+0
| | | | | | | | | | | | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | arm: Remove apx4devkit boardTom Rini2021-02-151-4/+0
| | | | | | | | | | | | | | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lauri Hintsala <lauri.hintsala@silabs.com<mailto:lauri.hintsala@silabs.com>> Signed-off-by: Tom Rini <trini@konsulko.com<mailto:trini@konsulko.com>>
* | Merge tag 'u-boot-atmel-fixes-2021.04-a' of ↵Tom Rini2021-02-121-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2021.04 cycle: This small PR includes just two fixes but very important: one revert in the clk subsystem which fixes the boot on many old boards (sama5d2_xplained, sama5d4_xplained), which currently crash at boot; and one small fix related to debug serial on sama7g5ek board.
| * | ARM: dts: at91: sama7g5ek: enable pull-up for serial debug lineEugen Hristev2021-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the serial tx/rx are floating, it can happen that bogus characters are detected on the line at boot time. This leads to U-boot accidentally thinking someone pressed a key to stop autoboot, thus stopping booting process. This can happen if the serial cable is not connected. There are hardware pull-ups on the board connected to serial cable VBUS. To solve this when the cable is not plugged, enable internal pull-ups as well for the tx/rx lines. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* | | usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotgPatrick Delaunay2021-02-101-3/+0
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux kernel v5.7-rc1 introduced the compatible "st,stm32mp15-hsotg". See Linux kernel commit d49850110434 ("dt-bindings: usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") This patch updates the supported compatible in DWC2 driver, removes the add-on done in U-Boot dtsi and keeps the compatible defined in SOC dtsi arch/arm/dts/stm32mp151.dtsi: usbotg_hs: usb-otg@49000000 { compatible = "st,stm32mp15-hsotg", "snps,dwc2"; reg = <0x49000000 0x10000>; ... }; Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
* | Merge tag 'u-boot-amlogic-20210210' of ↵Tom Rini2021-02-102-0/+12
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Add configuration helpers for MIPI D-PHY - generic-phy: add configure op - Add Amlogic AXG MIPI D-PHY driver & MIPI PCIe Analog PHY driver - odroid: add runtime detection of the N2/N2+/C4/HC4 variants
| * | board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variantsMarek Szyprowski2021-02-102-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the ADC channel 1 to check the hardware revision of the board and detect the N2 vs. N2+ and the C4 vs. HC4 variants. Each of them use different dtb file, so adjust fdtfile environment variable to the detected variant. The ADC min/max values for each variant are taken from the vendor code, adjusted to the 12-bit ADC driver operation mode (vendor code use 10-bit mode). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | | arm: dts: stm32mp15: alignment with v5.11-rc2Patrick Delaunay2021-02-098-75/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device tree alignment with Linux kernel v5.11-rc2 - fix DCMI DMA features on stm32mp15 family - Add alternate pinmux for FMC EBI bus - Harmonize EHCI/OHCI DT nodes name on stm32mp15 - update sdmmc IP version for STM32MP15 - Add LP timer irqs on stm32mp151 - Add LP timer wakeup-source on stm32mp151 - enable HASH by default on stm32mp15 - enable CRC1 by default on stm32mp15 - enable CRYP by default on stm32mp15 - set bus-type in DCMI endpoint for stm32mp157c-ev1 board - reorder spi4 within stm32mp15-pinctrl - add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx - fix mdma1 clients channel priority level on stm32mp151 - fix dmamux reg property on stm32mp151 - adjust USB OTG gadget fifo sizes in stm32mp151 - update stm32mp151 for remote proc synchronization support - support child mfd cells for the stm32mp1 TAMP syscon Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
* | | ARM: dts: stm32: Fix cosmetic typo: use 'kHz' as kilohertz abbreviationFabrice GIRARDOT2021-02-092-2/+2
|/ / | | | | | | | | | | | | | | | | The kilohertz unit abbreviation should read 'kHz'. Note to STM32 team: modified files were generated, it may be worth to fix STM32CubeMX tool. Signed-off-by: Fabrice GIRARDOT <fabrice.girardot@flowbird.group> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
* | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2021-02-0846-55/+2333
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | Layerscape: Enable gpio Bug fixes & updates related to dspi, qspi, pciep, SVR mask, stream-id, env variables, mdio for LAyerscape Platforms Add SATA, network variant 1, 2 support on sl28 powerpc: T1042: drop CONFIG_VIDEO, Add kmcent2 board supporrt, keymile Bug fixes and updates for keymile, Kontron
| * | arm64: dts: ls208xa: add gpio nodeBiwen Li2021-02-081-1/+45
| | | | | | | | | | | | | | | | | | | | | Add gpio node for SoC LS208xA Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | arm64: dts: ls1088a: add gpio nodeBiwen Li2021-02-081-1/+46
| | | | | | | | | | | | | | | | | | | | | Add gpio node for SoC LS1088A Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | arm64: dts: ls1046a: add gpio nodeBiwen Li2021-02-081-0/+40
| | | | | | | | | | | | | | | | | | | | | Add gpio node for SoC LS1046A Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | arm64: dts: ls1043a: add gpio nodeBiwen Li2021-02-081-0/+40
| | | | | | | | | | | | | | | | | | | | | Add gpio node for SoC LS1043A Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | arm64: dts: ls1028a: add gpio nodeBiwen Li2021-02-081-0/+33
| | | | | | | | | | | | | | | | | | | | | Add gpio node for SoC LS1028A Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | arm64: dts: ls1012a: add gpio nodeBiwen Li2021-02-081-0/+20
| | | | | | | | | | | | | | | | | | | | | Add gpio node for SoC LS1012A Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | arm: dts: ls1021a: add gpio nodeBiwen Li2021-02-081-0/+40
| | | | | | | | | | | | | | | | | | | | | Add gpio node for SoC LS1021A Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | gpio: mpc8xxx_gpio: Fix for litte endianBiwen Li2021-02-083-0/+39
| | | | | | | | | | | | | | | | | | | | | Update gpio driver to use same logic for big-endian and little-endian Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | mpc8xxx: fsl_pamu: Update data type in config_pamuPriyanka Jain2021-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update data type of '1' to '1ull' in below assignment size = 1ull << sizebit; to fix incorrect assignment issue. e.g: when sizebit was 31, 0x80000000 got sign extended to 0xffffffff_80000000 Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reported-by: Dean Saridakis <dean.saridakis@baesystems.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | armv7: ls102xa: Enable I-Cache to speed up the boot timeHou Zhiqiang2021-02-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the I-Cache to speed up the boot time, especailly for the NOR boot, currently it takes about 15 seconds from power up to the U-Boot prompt, and with the I-Cache enabled it only takes around 2.5 seconds. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | pci: layerscape: Remove the shadow SVR definitionsHou Zhiqiang2021-02-083-32/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the SVR definitions to a new svr.h for Layerscape armv7 and armv8 platforms respectively, so that the PCIe driver can reuse them. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | PowerPC: keymile: Add support for kmcent2 boardNiel Fourie2021-02-083-0/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic support for the Hitachi Power Grids kmcent2 board, based on the NXP QorIQ T1040 SoC. Signed-off-by: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> [Fixed blank line at EOF errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | PowerPC: dts: Pulled in kmcent2 dts files from Linux 5.10Niel Fourie2021-02-0817-0/+1580
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pulled in the kmcent2.dts and all its dependents from Linux 5.10, commit 2c85ebc57b3e upstream. Replaced the license text with SPDX License Identifiers. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | armv8: lx2: SVR_SOC_VER: Mask CAN_FD and security bitWasim Khan2021-02-081-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multiple LX2(LX2160A/LX2162A SoC) personality variants exists based on CAN-FD and security bit in SVR. Currenly SVR_SOC_VER mask only security bit. Update SVR_SOC_VER to mask CAN_FD and security bit for LX2 products. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | armv8: ls1028a: fix stream id allocationNipun Gupta2021-02-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | When A-050382 errata is enabled, ECAM and EDMA have conflicting stream id 40. This patch fixes the same. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board: sl28: add SATA supportMichael Walle2021-02-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SATA support. Although not supported by the usual SATA pins on the SMARC baseboard connector, SATA mode is supported on a PCIe lane. This way one can use a mSATA card in a Mini PCI slot. We need to invert the received data because in this mode the polarity of the SerDes lane is swapped. Provide a fixup in board_early_init_f() for the SPL. board_early_init_f() is then not common between SPL and u-boot proper anymore, thus common.c is removed, as it just contained said function. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board: sl28: add network variant 2 supportMichael Walle2021-02-084-3/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | Although this variant has two external network ports, they are not (yet) supported by the bootloader because they are connected via an internal network switch. Otherwise its the same as the other variants. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board: sl28: add network variant 1 supportMichael Walle2021-02-084-3/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | This variant has one network port connected via RGMII and doesn't have any TSN capabilities out-of-the-box. Instead it has all four SerDes lanes available for customer use. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board: sl28: move ethernet aliases to variant specific dtsiMichael Walle2021-02-083-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The variants differ in their network configuration. Move the first two network aliases to the proper variant device tree includes. This is in prepartion for variant 1 and 2 support which has a different network port mapping. The network aliases for the two internal ports will stay in the common dtsi because they are present on all board variants. This might leave a hole if there is no ethernet1 alias. This is intended. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | armv8: dts: fsl-lx2162a: add dspi node into qds dtsZhao Qiang2021-02-081-0/+105
| | | | | | | | | | | | | | | | | | | | | | | | Add dspi node into lx2162aqds device tree Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | armv8: lx2162aqds: disable non existing pcie controllersWasim Khan2021-02-081-12/+10
| | | | | | | | | | | | | | | | | | | | | disable non existing pcie controllers on lx2162aqds Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | | ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev KitAdam Ford2021-02-074-0/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Beacon EmbeddedWorks kit is based on the R8A774E1 SoC also known as the RZ/G2H. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. It shares much of the same design as the RZ/G2M and RZ/G2N dev kits. Signed-off-by: Adam Ford <aford173@gmail.com>
* | | ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev KitAdam Ford2021-02-074-0/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Beacon EmbeddedWorks kit is based on the R8A774B1 SoC also known as the RZ/G2N. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. It shares much of the same design as the RZ/G2M dev kit. Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit (git 2.34.1) at 2024-11-16 22:25:40 +0000