summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx
Commit message (Collapse)AuthorAgeFilesLines
...
* iMX8MQ: Recognize the B2 revisionYe Li2021-04-081-1/+10
| | | | | | | | | | | | i.MX8MQ B2 is using same value in OCOTP_READ_FUSE_DATA like B1, so we have to check the ROM verision to distinguish the revision. As we have checked the B1 rev for sticky bits work around in secure boot. So it won't apply on B2. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8m: soc: update fuse pathPeng Fan2021-04-081-5/+10
| | | | | | | Update fuse path to disable modules correctly. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8m: Update thermal and PMU kernel nodes for dual/single coresYe Li2021-04-081-0/+76
| | | | | | | | | | For dual core and single core iMX8M parts, the thermal node and PMU node in kernel DTB also needs update to remove the refers to deleted core nodes. Otherwise both driver will fail to work. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8mn: Add support for 11x11 UltraLite part numberYe Li2021-04-082-13/+31
| | | | | | | | | | | | There are 3 part numbers for 11x11 i.MX8MNano with different core number configuration: UltraLite Quad/Dual/Solo Comparing with i.MX8MN Lite parts, they have MIPI DSI disabled. So checking the MIPI DSI disable fuse to recognize these parts. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8mn: Add low drive mode support for DDR4/LPDDR4 EVKYe Li2021-04-081-0/+45
| | | | | | | | | Add dedicated defconfigs for iMX8MN low drive mode which set the VDD_SOC and VDD_DRAM to 0.8v, DDR at 1600MTS (800Mhz clock) and GPU at 200Mhz. Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8mn: Add LPDDR4 EVK board supportPeng Fan2021-04-081-0/+6
| | | | | | | | Add support for iMX8MN LPDDR4 EVK board which uses 2GB LPDDR4 and PCA9450B PMIC. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* Merge tag 'v2021.04-rc4' into nextTom Rini2021-03-154-5/+62
|\ | | | | | | Prepare v2021.04-rc4
| * board: gateworks: imx8mm: Add Gateworks Venice board supportTim Harvey2021-03-031-0/+7
| | | | | | | | | | | | | | Add initial support for Gateworks Venice product family based on the i.MX 8M Mini SoC Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=yMarek Vasut2021-03-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The u-boot-with-spl.imx is a concatenation of SPL and u-boot.uim. The u-boot.uim is u-boot.bin wrapped in uImage. In case OF_SEPARATE is enabled, the u-boot.bin does not contain control DT for U-Boot, and so u-boot.uim does not contain the DT, and so u-boot-with-spl.imx does not contain the DT, and a system where u-boot-with-spl.imx is written to offset 1024B to the start of storage no longer boots, as it is missing DT. In case OF_SEPARATE is enabled, u-boot.img contains both u-boot.bin and the necessary DTs. Therefore, use u-boot.img instead of u-boot.uim to generate u-boot-with-spl.imx when OF_SEPARATE is enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
| * ARM: imx: Do not hard-code MX8M MMU table DRAM entry offsetMarek Vasut2021-03-011-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | Instead of hard-coding the offset of DRAM entries in MMU table all over the code, auto-detect the offset. This removes error-prone code which would break e.g. in case the MMU table is modified. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
| * ARM: mx6: Add function to set serial#Sean Anderson2021-03-011-0/+37
| | | | | | | | | | | | | | | | | | The serial number OTP is similar to the imx7 version, except that the register names are different. This also sets serial# directly, instead of providing board_get_serial. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | reset: Remove addr parameter from reset_cpu()Harald Seiler2021-03-022-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Historically, the reset_cpu() function had an `addr` parameter which was meant to pass in an address of the reset vector location, where the CPU should reset to. This feature is no longer used anywhere in U-Boot as all reset_cpu() implementations now ignore the passed value. Generic code has been added which always calls reset_cpu() with `0` which means this feature can no longer be used easily anyway. Over time, many implementations seem to have "misunderstood" the existence of this parameter as a way to customize/parameterize the reset (e.g. COLD vs WARM resets). As this is not properly supported, the code will almost always not do what it is intended to (because all call-sites just call reset_cpu() with 0). To avoid confusion and to clean up the codebase from unused left-overs of the past, remove the `addr` parameter entirely. Code which intends to support different kinds of resets should be rewritten as a sysreset driver instead. This transformation was done with the following coccinelle patch: @@ expression argvalue; @@ - reset_cpu(argvalue) + reset_cpu() @@ identifier argname; type argtype; @@ - reset_cpu(argtype argname) + reset_cpu(void) { ... } Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: Remove sksimx6 boardTom Rini2021-02-251-6/+0
| | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
* arm: Remove mx53smd boardTom Rini2021-02-251-5/+0
| | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* arm: Remove mx53ard boardTom Rini2021-02-251-5/+0
| | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* arm: Remove mx25pdk boardTom Rini2021-02-251-7/+0
| | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIOIgor Opaniuk2021-02-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* spl: fit: Drop 'length' argument to board_spl_fit_post_load()Alexandru Gagniuc2021-02-171-3/+4
| | | | | | | | | | | | The size is derived from the FIT image itself. Any alignment requirements are machine-specific and known by the board code. Thus the total length can be derived from the FIT image and knowledge of the platform. The 'length' argument is redundant. Remove it. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> CC: Matt Porter <mporter@konsulko.com>
* Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini2021-02-1519-0/+19
|\ | | | | | | - Merge the patch to take <asm/global_data.h> out of <common.h>
| * common: Drop asm/global_data.h from common headerSimon Glass2021-02-0219-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm: Remove apx4devkit boardTom Rini2021-02-151-4/+0
|/ | | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lauri Hintsala <lauri.hintsala@silabs.com<mailto:lauri.hintsala@silabs.com>> Signed-off-by: Tom Rini <trini@konsulko.com<mailto:trini@konsulko.com>>
* ARM: imx: add i.MX8MN lpddr4 image cfg fileMarek Vasut2021-01-231-0/+17
| | | | | | | | | Add cfg file for i.MX8MN LPDDR4 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.Adam Ford2021-01-231-0/+7
| | | | | | | | | | | Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP supportTeresa Remmet2021-01-231-0/+7
| | | | | | | | | | | | | | Add initial support PHYTEC phyCORE-i.MX8MP SOM. Supported features: - 2GB LPDDR4 RAM - eMMC - external SD - debug UART2 - watchdog Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Heiko Schocher <hs@denx.de>
* imx: timer: Modify GPT timer driver for mx7Ye Li2021-01-231-7/+9
| | | | | | | | | | | Modify the GPT common platform driver for mx7 which only use 24Mhz OSC as clock source. Note: at default, the mx7d will use system counter as timer. The GPT is disabled. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8m: add QSPI boot devPeng Fan2021-01-232-2/+6
| | | | | | | | When boot type could not be detected from rom sw info, read sbmr1 to detect, here we only use it to detect FLEXSPI boot, because ROM not update it in rom sw info. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx6: Remove AHCI device before boot OSYe Li2021-01-231-0/+16
| | | | | | | | Since we remove SATA device before boot OS, when AHCI is enabled, update the codes to remove AHCI device. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: Fix market segment fuse offset on iMX8MPYe Li2021-01-231-1/+7
| | | | | | | | | iMX8MP has shifted market segment fuse one bit from 0x440 [7:6] to [6:5], correct it in imx common codes. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* nandbcb: nand support for i.MX8MPHan Xu2021-01-231-8/+8
| | | | | | | | | | | Add NAND boot support for i.MX8MP by adding i.MX8MP in nandbcb support list, reading boot_search_count from fuse. i.MX8MN NAND boot is same as i.MX8MP, fix some issues as well. Signed-off-by: Han Xu <han.xu@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: nandbcb: Fix potential overflow in nandbcb_set_boot_configYe Li2021-01-231-1/+2
| | | | | | | | | Fix Coverity Issue 9006656. In nandbcb_set_boot_config, an integer overflow occurs, with the result converted to a wider integer type. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: nandbcb: Fix potential overflow in fill_dbbt_dataYe Li2021-01-231-1/+1
| | | | | | | | | Fix Coverity Issue 9006658. In fill_dbbt_data, an integer overflow occurs, with the result converted to a wider integer type Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: nandbcb: Fix resource leak in read_fcbYe Li2021-01-231-2/+7
| | | | | | | | | | | Fix Coverity Issue 9006657. In read_fcb, leak of memory to system resource "fcb_raw_page". Adjust the sequence to check the mtd bad block prior than allocation of "fcb_raw_page", also check the NULL return of allocation. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: nandbcb: Fix resource leakYe Li2021-01-231-2/+0
| | | | | | | | | | Fix Coverity Issue 9006655. In write_fcb, leak of memory to resource "fcb_raw_page". Since we have initialized the "ret" to 0, should return the value of ret. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* nandbcb: Fix uninitialized variableYe Li2021-01-231-1/+1
| | | | | | | | | Fix Coverity Issue 9006654. In write_fcb, use of an uninitialized variable "ret". Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8m: lowlevel_init: tune alignmentPeng Fan2021-01-231-1/+1
| | | | | | The minimum alignment is 16 bytes, so use align 4 is enough. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: imx8mn_ddr4_evk: Use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK boardPeng Fan2021-01-231-1/+1
| | | | | | | use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board, we will use CONFIG_TARGET_IMX8MN_EVK for LPDDR4 EVK board. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextTom Rini2021-01-052-2/+2
|\ | | | | | | | | | | | | | | | | Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
| * dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO()Simon Glass2021-01-052-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current macro is a misnomer since it does not declare a device directly. Instead, it declares driver_info record which U-Boot uses at runtime to create a device. The distinction seems somewhat minor most of the time, but is becomes quite confusing when we actually want to declare a device, with of-platdata. We are left trying to distinguish between a device which isn't actually device, and a device that is (perhaps an 'instance'?) It seems better to rename this macro to describe what it actually is. The macros is not widely used, since boards should use devicetree to declare devices. Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is declaring a new driver_info record, not a device. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge tag 'v2021.01-rc5' into nextTom Rini2021-01-056-69/+96
|\ \ | |/ |/| | | | | | | Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
| * imx: mx7: clock: use correct format stringsHeinrich Schuchardt2020-12-261-11/+11
| | | | | | | | | | | | | | | | Use %u and not %d for unsigned values. Print kHz and not khz. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| * imx: ahab: allow to bypass confirmation for ahab_close cmdClément Péron2020-12-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Calling ahab_close cmd force the user to interact for confirmation. This is not user-friendly when using this cmd during factory process. Allow the user to pass '-y' option to bypass this confirmation. Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
| * imx8: allow overriding memory layoutMarcel Ziswiler2020-12-061-29/+67
| | | | | | | | | | | | | | | | | | | | Introduce weak function board_mem_get_layout() which allows overriding the memory layout from board code in runtime, useful for handling different SKU versions. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
| * board: toradex: add apalis-imx8x 2gb wb it v1.1a module supportIgor Opaniuk2020-12-061-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
| * imx8m: fix cache setup for dynamic sdram sizeTim Harvey2020-12-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | the mem_map structure containing the size of SDRAM is used in various cache functions in cache_v8.c thus we need to update it with the sdram size the board is configured with as well. Without this the cache functions do not get setup properly and can hang in the case where a board reports more SDRAM than defined in PHYS_SDRAM_SIZE. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ahab: fix implicit declaration warningOliver Graute2020-12-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following warning: arch/arm/mach-imx/imx8/ahab.c:105:3: warning: implicit declaration of function ‘flush_dcache_range’ [-Wimplicit-function-declaration] flush_dcache_range(s, e); ^~~~~~~~~~~~~~~~~~ Include cpu_func.h header which declares the flush_dcache_range() function. Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
| * imx: ahab: fix compiler warnings in debugOliver Graute2020-12-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | arch/arm/mach-imx/imx8/ahab.c: In function ‘authenticate_os_container’: arch/arm/mach-imx/imx8/ahab.c:96:9: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘ulong {aka long unsigned int}’ [-Wformat=] debug("img %d, dst 0x%x, src 0x%x, size 0x%x\n", Fix those by using "%lu" specified. Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
| * imx: ahab: Fix compiler warnings in printfOliver Graute2020-12-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | arch/arm/mach-imx/imx8/ahab.c:110:63: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘u64 {aka long long unsigned int}’ [-Wformat=] Fix those by using %llx Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: uboot-imx <uboot-imx@nxp.com>
| * imx6: add support for aristainetos2c_cslb board variantHeiko Schocher2020-12-061-0/+11
| | | | | | | | | | | | add support for aristainetos2c_cslb board variant. Signed-off-by: Heiko Schocher <hs@denx.de>
| * imx6: remove not longer supported aristainetos boardsHeiko Schocher2020-12-061-33/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Removed aristainetos2, 2b, 2b-csl. This boards have been recalled and destroyed. Adapt board code to remove stuff not needed anymore. Fix checkpatch warning, remove fdt_high and initrd_high from default environment. Signed-off-by: Heiko Schocher <hs@denx.de> zu remove
* | dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass2020-12-132-2/+2
|/ | | | | | | | | | We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-08-31 03:13:30 +0000