summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx
Commit message (Collapse)AuthorAgeFilesLines
...
* imx8: ahab: fix 'end address' parameter of rm_find_memregPeng Fan2020-05-011-1/+1
| | | | | | | parameter 'end address' must be inclusive of address range. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8: Change to use new SECO API commandsYe Li2020-05-012-6/+6
| | | | | | | | | Latest SCFW has removed old MISC SECO commands. So update the codes to use new SECO commands. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* imx8: parser: fix 'end address' parameter of rm_find_memregPeng Fan2020-05-011-1/+1
| | | | | | | | | parameter 'end address' must be inclusive of address range. Modified from Seb's downstream patch. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8m: Dump DRAM PLL rate by clocks commandYe Li2020-05-011-0/+2
| | | | | | | | Add the dump of DRAM PLL into "clocks" command Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
* imx8mq: Set ARM core clock directly from ARM PLLPeng Fan2020-05-011-16/+33
| | | | | | | | | | | | | | For ARM core clock, there are two input branches, and can select via mux: one from ARM PLL directly, second from CCM A53 clock root. Currently we are using second branch. But IC confirmed the CCM A53 root signoff timing is 1Ghz, so we should switch to input from ARM PLL directly. This patch fixes the CORE SEL slice configuration and switch ARM clock to ARM PLL. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8mq: Enable eMMC HS400 and SD UHS mode on EVKYe Li2020-05-011-4/+2
| | | | | | | | | | | | | iMX8MQ EVK board has a eMMC5.0 chip and supports SD3.0, so enable the UHS and HS400 configs to enhance the eMMC/SD access. The change also needs to set usdhc clock to 400Mhz, and add the off-on-delay-us to SD reset pin, otherwise some SD cards will fail to select UHS mode in re-initialization. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8m: update clock root and fix core_selPeng Fan2020-05-011-10/+775
| | | | | | | | | Update clock root table to let it be easy to configure clock at very early stage. Also the core_sel mux parent should be A53 CLK root and ARM PLL. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8m: acquire ATF commit hashPeng Fan2020-05-011-0/+24
| | | | | | | | Acquire ATF commit hash when booting U-Boot to make user easy to know the ATF version. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8: move SIP macro to common headerPeng Fan2020-05-011-5/+3
| | | | | | | | Move the SIP macro to common header and unify the name to make others could reuse them. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: imx8m: add i.MX8MN variants supportPeng Fan2020-05-012-2/+29
| | | | | | | Add i.MX8MN variants support Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: imx8m: add i.MX8MQ Dual and QuadLite supportPeng Fan2020-05-012-2/+14
| | | | | | | Add i.MX8MQ Dual and QuadLite variants. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: cpu: support speed grade for i.MX8MPPeng Fan2020-05-011-1/+1
| | | | | | | | i.MX8MP speed grade use same layout as i.MX8MN, so reuse it for i.MX8MP Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8mn: Update speed gradePeng Fan2020-05-011-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | imx8mn speed grade fuse uses new definitions as below. So have to update get_cpu_speed_grade_hz function to match it. SPEED_GRADE[5:4] SPEED_GRADE[3:0] MHz xx 0000 2300 xx 0001 2200 xx 0010 2100 xx 0011 2000 xx 0100 1900 xx 0101 1800 xx 0110 1700 xx 0111 1600 xx 1000 1500 xx 1001 1400 xx 1010 1300 xx 1011 1200 xx 1100 1100 xx 1101 1000 xx 1110 900 xx 1111 800 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* imx8mm: Update CPU speed gradingYe Li2020-05-011-3/+3
| | | | | | | | | | According to iMX8MM datasheet (IMX8MMIEC_Rev_D and IMX8MMCEC_Rev_D), the speed grading for imx8mm is 800Mhz, 1.2Ghz, 1.6Ghz and 1.8Ghz. Update them to get_cpu_speed_grade_hz function. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* ARM: imx: imx8mm: Add missing clock entries for FEC clockMarek Vasut2020-05-012-0/+74
| | | | | | | | | | | | | All the FEC ethernet clock entries for iMX8MM are missing, while they are already present on iMX8MQ. Fill in the nodes on iMX8MM, as the FEC ethernet gets bogus clock information otherwise which makes ethernet inoperable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()Harald Seiler2020-04-221-1/+1
| | | | | | | | | | | | | | | The function's name is misleading as one might think it is used generally to select the boot-mode when in reality it is only used by the MMC driver to find out in what way it should try reading U-Boot Proper from a device (either using a filesystem, a raw sector/partition, or an eMMC boot partition). Rename it to spl_mmc_boot_mode() to make it more obvious what this function is about. Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini2020-04-204-15/+130
|\
| * Add support for i.MXRT1020-EVK boardGiulio Benetti2020-04-181-0/+5
| | | | | | | | | | Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
| * Add i.MXRT1020 supportGiulio Benetti2020-04-181-0/+4
| | | | | | | | | | Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
| * arch: arm: tqma6: apply default Kconfig for device modelMichael Krummsdorf2020-04-171-0/+11
| | | | | | | | Signed-off-by: Michael Krummsdorf <michael.krummsdorf@ew.tq-group.com>
| * arm: imx6: configure NoC on i.MX6DQPBernhard Messerklinger2020-04-171-0/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | The i.MX6DP and i.MX6QP incorporate NoC interconnect logic which needs to be configured in order to use external DDR memory. This patch enables the SPL to configure the necessary registers in accordance with the NXP engineering bulletin EB828. Co-developed-by: Filip Brozović <fbrozovic@gmail.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
| * mx7ulp: Only enable LDO if it is not already enabledFabio Estevam2020-04-171-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | LDO mode may be already enabled by the ROM and enabling it again can cause U-Boot to hang. Avoid this problem by only enabling LDO mode if it is initially disabled. Reported-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| * mx7ulp: Remove duplicated definitionsFabio Estevam2020-04-171-4/+0
| | | | | | | | | | | | | | | | | | These PMC0 definitions are already defined in the beginning of the file, so remove the duplication. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | arm: imx: update reference to README.mxc_habPatrick Delaunay2020-04-161-2/+2
|/ | | | | | | | | Update reference in files detected by scripts/documentation-file-ref-check doc/README.mxc_hab => doc/imx/habv4/* Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* Merge branch 'next'Tom Rini2020-04-131-64/+0
|\ | | | | | | | | | | | | | | | | | | | | Pull in changes that have been pending in our 'next' branch. This includes: - A large number of CI improvements including moving to gcc-9.2 for all platforms. - amlogic, xilinx, stm32, TI SoC updates - USB and i2c subsystem updtaes - Re-sync Kbuild/etc logic with v4.19 of the Linux kernel. - RSA key handling improvements
| * Merge tag 'ti-v2020.07-next' of ↵Tom Rini2020-03-171-64/+0
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next K3 J721E: * OSPI boot support * Support for loading remote cores in R5 SPL * PMIC ESM Support * Minor fixes for R5F and C7x remoteproc drivers K3 AM654: * Update AVS class 0 voltages. * Add I2C nodes DRA7xx/AM57xx: * Fixed Android boot on AM57xx AM33/AM43/Davinci: * switch to driver model for the net and mdio driver for baltos * Add DM/DTS support for omap video driver * Enable fastboot on am335x-evm
| | * lib: elf: Move the generic elf loading/validating functions to libKeerthy2020-03-031-64/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the generic elf loading/validating functions to lib/ so that they can be re-used and accessed by code existing outside cmd. While at it remove the duplicate static version of load_elf_image_phdr under arch/arm/mach-imx/imx_bootaux.c. Signed-off-by: Keerthy <j-keerthy@ti.com> Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* | | imx: Fix imx8m FIT script issueYe Li2020-04-091-4/+4
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | The FIT config node has reversed ATF and u-boot: ATF is set to 'firmware' but u-boot is set to 'loadables'. This script can work previously because spl fit driver wrongly appends fdt to all loadable images. With the issue fixed in commit 9d15d1d1c24f ("Revert "common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"") the u-boot in 'loadables' does not have fdt appended and fails to work. So correct the script by moving u-boot to 'firmware' and ATF to 'loadables'. Signed-off-by: Ye Li <ye.li@nxp.com> Reported-by: Matt Porter <mporter@konsulko.com> Tested-by: Matt Porter <mporter@konsulko.com>
* | Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini2020-03-101-1/+2
|\ \ | | | | | | | | | | | | | | | | | | - DM support for CAxxxx SoCs - eMMC board for presidio-asic - Add defer probe for mmc sdhci - TI SoCs mmc misc update
| * | spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementationFaiz Abbas2020-03-091-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | The call to spl_mmc_get_uboot_raw_sector() completely ignores and overwrites the raw_sect value passed from the caller of spl_mmc_load(). Fix this by passing raw_sect to the function and returning the same value in the default case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | imx8mm/mn: Add missing root clock entry for ARM core clockFrieder Schrempf2020-03-091-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation in arch/arm/mach-imx/cpu.c uses non-DM code to retrieve the core clock frequency. As the root clock is not listed we currently get: CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Fix this by adding the missing entry, which results in: CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* | imx: Makefile: added missing ahab.oOliver Graute2020-03-091-0/+1
|/ | | | | | | | | | | | | added missing ahab.o in Makefile Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini2020-02-112-0/+3
|\ | | | | | | | | | | | | sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
| * dm: core: Create a new header file for 'compat' featuresSimon Glass2020-02-052-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: core: Require users of devres to include the headerSimon Glass2020-02-051-0/+1
| | | | | | | | | | | | | | | | | | | | At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
* | ARM: imx: novena: Enable DM ethernetMarek Vasut2020-02-091-0/+1
| | | | | | | | | | | | | | | | | | Convert to DM ethernet to prevent board removal. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
* | ARM: imx: novena: Move defconfig bits to arch KconfigMarek Vasut2020-02-091-0/+8
| | | | | | | | | | | | | | | | | | | | Just move the defconfig entries which are required into the Novena entry in arch Kconfig, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
* | board: toradex: Add Verdin iMX8M Mini supportIgor Opaniuk2020-02-091-0/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
* clock_imx8mq: Make frac_pll_init() staticPedro Jardim2020-01-261-1/+1
| | | | | | | | | | | Since frac_pll_init() is only used in this file, change it to 'static'. This fixes the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:662:5: warning: no previous prototype for ‘frac_pll_init’ [-Wmissing-prototypes] Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
* clock_imx8mq: Remove the function sscg_pll_init()Pedro Jardim2020-01-261-71/+0
| | | | | | | | | | | | Function sscg_pll_init() is not used anywhere, so it can simply be deleted. This was found because of the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:702:5: warning: no previous prototype for ‘sscg_pll_init’ [-Wmissing-prototypes] int sscg_pll_init(u32 pll) ^~~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
* clock_imx8mq: Make do_imx8m_showclocks() staticPedro Jardim2020-01-261-1/+1
| | | | | | | | | | | | | Since do_imx8m_showclocks() is only used inside this file, make it 'static'. This fixes the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:836:5: warning: no previous prototype for ‘do_imx8m_showclocks’ [-Wmissing-prototypes] int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
* clock_imx8mq: Delete not used init_usb_clk()Pedro Jardim2020-01-261-22/+0
| | | | | | | | | | | | Function init_usb_clk() is not used anywhere, so it can simply be deleted. This was detected by the following sparse warning: arch/arm/mach-imx/imx8m/clock_imx8mq.c:377:6: warning: no previous prototype for ‘init_usb_clk’ [-Wmissing-prototypes] void init_usb_clk(void) ^~~~~~~~~~~~ Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
* Merge tag 'u-boot-imx-20200121' of ↵Tom Rini2020-01-213-5/+20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------- imx8: cleanup, fix warnings imx6ull: add VisionSOM SoM and EVK mx7ulp: fix warning due network, cleanup mx7dsabre: Fix dm probe pmic imx6: fixed for vining2000 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
| * imx8m: clock_imx8mm: Staticize functionsAlifer Moraes2020-01-201-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Functions fracpll_configure(), decode_intpll(), decode_fracpll(), get_root_src_clk() and get_root_clk() are used only in the scope of this file, so make them static to fix the following sparse warnings: arch/arm/mach-imx/imx8m/clock_imx8mm.c:50:5: warning: no previous prototype for ‘fracpll_configure’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:271:5: warning: no previous prototype for ‘decode_intpll’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:418:5: warning: no previous prototype for ‘decode_fracpll’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:483:5: warning: no previous prototype for ‘get_root_src_clk’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:527:5: warning: no previous prototype for ‘get_root_clk’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
| * mx7ulp: soc: s_init should only be executed onceJorge Ramirez-Ortiz2020-01-201-0/+2
| | | | | | | | | | | | | | | | | | On SPL enabled systems, the current s_init code (wdog, clock and ldo init) is executed twice (by SPL and u-boot). This is not necessary and might lead to boot issues (ie, starting PMC1 when it is already running). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
| * ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVKArkadiusz Karas2020-01-201-0/+13
| | | | | | | | | | | | | | | | | | | | Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* | common: Move hang() to the same header as panic()Simon Glass2020-01-172-0/+2
| | | | | | | | | | | | | | | | | | | | At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
* | common: Move RAM-sizing functions to init.hSimon Glass2020-01-173-0/+3
| | | | | | | | | | | | | | These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
* | common: Move reset_cpu() to the CPU headerSimon Glass2020-01-171-0/+1
| | | | | | | | | | | | Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
* | common: Move clock functions into a new fileSimon Glass2020-01-173-0/+3
|/ | | | | | | These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-09-01 15:46:02 +0000