summaryrefslogtreecommitdiffstats
path: root/arch/arm/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* arm: highbank: Do DRAM init from DTAndre Przywara2021-04-201-0/+1
| | | | | | | | | | | | | | | | | | | | So far U-Boot was hard coding a (surely sufficient) memory size of 512 MB, even though all machines out there have at least 4GB of DRAM. Since U-Boot uses its memory knowledge to populate the EFI memory map, we are missing out here, at best losing everything beyond 4GB on Midway boxes (which typically come with 8GB of DRAM). Since the management processor populated the DT memory node already with the detected DRAM size and configuration, we use that to populate U-Boot's memory bank information, which is the base for the UEFI memory map. This finally allows us to get rid of the NR_DRAM_BANKS=0 hack, that we had in place to avoid U-Boot messing up the DT memory node before loading the kernel. Also, to cover the whole of memory, we need to enable PHYS_64BIT. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* net: calxedagmac: Convert to DM_ETHAndre Przywara2021-04-201-0/+1
| | | | | | | | | | | | | | | | | | To squash that nasty warning message and make better use of the newly gained OF_CONTROL feature, let's convert the calxedagmac driver to the "new" driver model. The conversion is pretty straight forward, mostly just adjusting the use of the involved data structures. The only actual change is the required split of the receive routine into a receive and free_pkt part. Also this allows us to get rid of the hardcoded platform information and explicit init calls. This also uses the opportunity to wrap the code decoding the MMIO register base address, to make it safe for using PHYS_64BIT later. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
* arm: highbank: Enable OF_CONTROLAndre Przywara2021-04-201-1/+8
| | | | | | | | | | | | | | | | | All Calxeda machines are actually a poster book example of device tree usage: the DT is loaded from flash by the management processor into DRAM, the memory node is populated with the detected DRAM size and this DT is then handed over to the kernel. So it's a shame that U-Boot didn't participate in this chain, but fortunately this is easy to fix: Define CONFIG_OF_CONTROL and CONFIG_OF_BOARD, and provide a trivial function to tell U-Boot about the (fixed) location of the DTB in DRAM. Then enable DM_SERIAL, to let the PL011 driver pick up the UART platform data from the DT. Also define AHCI, to bring this driver into the driver model world as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* arch: arm: update Kconfig to select IRQ when GIC_V3_ITS is enabledWasim Khan2021-04-201-0/+1
| | | | | | | | | | GIC_V3_ITS uses UCLASS_IRQ driver. Update Kconfig to select IRQ when GIC_V3_ITS is enabled. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
* board: sl28: enable DM_SERIALMichael Walle2021-04-151-0/+1
| | | | | | | With all preparations in place, switch over to DM_SERIAL. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board: sl28: move DM_* configs to KconfigMichael Walle2021-04-151-0/+19
| | | | | | | Move the CONFIG_DM_* from the defconfig to the TARGET_SL28 config. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* board/km: add support for seli8 design based on nxp ls102xAleksandar Gerasimovski2021-04-151-0/+19
| | | | | | | | | | | | | | | | | | | | | | The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and FOX product lines. It is based on NXP LS1021 SoC and it provides following interfaces: - IFC interface for NOR, NAND and external FPGA's - 1 x RGMII ETH for debug purposes - 2 x SGMII ETH for management communication via back-plane - 1 x uQE HDLC for management communication via back-plane - 1 x I2C for peripheral devices - 1 x SPI for peripheral devices - 1 x UART for debug logging It is foreseen that the design will be later re-used for another XMC and FOX service cards with similar SoC requirements. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* arm: Remove Broadcom Cygnus boardsTom Rini2021-04-101-7/+1
| | | | | | | | These boards have not been converted to CONFIG_DM by the deadline. Remove them. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Remove bcm23550_w1d boardTom Rini2021-04-101-7/+0
| | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Remove bcm28155_ap boardTom Rini2021-04-101-7/+0
| | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Remove bcm958712k boardTom Rini2021-04-101-1/+0
| | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Remove s32v234evb boardTom Rini2021-04-101-6/+0
| | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Eddy Petrișor <eddy.petrisor@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Remove vexpress_ca15_tc2 boardTom Rini2021-04-101-18/+0
| | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Remove apf27 boardTom Rini2021-04-101-6/+0
| | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* crypto: caam: Add CAAM support to i.MX8M platformsAymen Sghaier2021-04-081-0/+3
| | | | | | | This patch enable CAAM support for i.MX8M platforms. Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* caam: enable support for iMX7ULPFranck LENORMAND2021-04-081-0/+3
| | | | | Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64Siew Chin Lim2021-03-081-3/+3
| | | | | | Create common macro TARGET_SOCFPGA_SOC64 for Stratix10 and Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
* arm: Remove ls2080a_simu boardTom Rini2021-02-151-13/+0
| | | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* arm: Remove mx35pdk boardTom Rini2021-02-151-6/+0
| | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
* Merge tag 'ti-v2021.04-rc1' of ↵Tom Rini2021-01-121-0/+1
|\ | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-ti - DM support for OMAP PWM backlight - USB host mode support for AM654 - Minor SPI fixes - Add support k2g ice board with 1GHz silicon - Fix GTC programming for K3 devices
| * bus: ti: add minimal sysc interconnect target driverDario Binacchi2021-01-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | We can handle the sysc interconnect target module in a generic way for many TI SoCs. Initially let's just enable domain clocks before the children are probed. The code is loosely based on the drivers/bus/ti-sysc.c of the Linux kernel version 5.9-rc7. For DT binding details see: - Documentation/devicetree/bindings/bus/ti-sysc.txt Signed-off-by: Dario Binacchi <dariobin@libero.it>
* | sunxi: board: Move USB ethernet initialization to board_late_init()Andy Shevchenko2021-01-111-0/+1
|/ | | | | | | | | | | | | For the sake of consistency (*) and order of initialization, i.e. after we have got the ethernet address, interrupt and timer initialized, try to initialize USB ethernet gadget. *) for example, zynqmp uses same order. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* armv8: lx2162aqds: Add support for LX2162AQDS platformMeenakshi Aggarwal2020-12-101-0/+12
| | | | | | | | | | | | | | | This patch add base support for LX2162AQDS board. LX2162AQDS board supports LX2162A family SoCs. This patch add basic support of platform. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: hui.song <hui.song_1@nxp.com> Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Vikas Singh <vikas.singh@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* rockchip: Enable BINMAN for boards enable SPL_OPTEEKever Yang2020-11-131-1/+1
| | | | | | | | | | | Rockchip has many 32bit SoCs and some of them are support SPL_OPTEE now, only boards with SPL_OPTEE support can fit BINMAN well, other boards will fail at initr_binman() in U-Boot proper after below patch, eg. rv1108 board. 83187546ae binman: Support multiple images in the library Fixes: 79030a4861 ("rockchip: Add Single boot image (with binman, pad_cat)") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* board: kontron: add sl28 supportMichael Walle2020-10-231-0/+11
| | | | | | | | | | | | | | | | | Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux. For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant. In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* arm: octeontx: Select CLKStefan Roese2020-10-161-0/+2
| | | | | | | | | | Clock support is needed for all Octeon TX/TX2 boards. This patch selects CONFIG_CLK so that it is available. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
* arm: enable DM_RNG on QEMU by defaultHeinrich Schuchardt2020-10-141-0/+1
| | | | | | | | The EFI_RNG_PROTOCOL is needed for address randomization in Linux. We should provide it by default on QEMU. Reported-by: François Ozog <francois.ozog@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* Merge branch 'for-next' of https://github.com/lftan/u-bootTom Rini2020-10-121-1/+1
|\
| * sysreset: socfpga: agilex: Enable sysreset supportChee Hong Ang2020-10-091-1/+1
| | | | | | | | | | | | | | Enable sysreset support for Agilex platform. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
| * sysreset: socfpga: soc64: Rename SYSRESET SoCFPGA driver for S10 to SoC64Chee Hong Ang2020-10-091-1/+1
| | | | | | | | | | | | | | | | Rename the driver from S10 to SoC64 because Intel Agilex platform also using the this SYSRESET SoCFPGA driver for S10. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
* | qemu-arm64: Enable POSITION_INDEPENDENTAndre Przywara2020-10-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that PIE works when U-Boot is started from ROM, let's enable CONFIG_POSITION_INDEPENDENT, which allows to load U-Boot also via ARM Trusted-Firmware's fip.bin to DRAM, without tweaking the configuration. To get a writable initial stack, we need to keep the fixed initial stack pointer, which points to DRAM in our case. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | qemu-arm: Drop ARCH_SUPPORT_TFABOOTAndre Przywara2020-10-081-1/+0
| | | | | | | | | | | | | | | | | | | | CONFIG_ARCH_SUPPORT_TFABOOT was used on the qemu-arm64 platform to guard a tweak to the flash bank configuration. U-Boot now reads the current flash setup from the devicetree, so there is no need for this option anymore. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm64: PIE: Allow fixed stack pointerAndre Przywara2020-10-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently selecting CONFIG_POSITION_INDEPENDENT also forces us to use an initial stack pointer relative to the beginning of the BSS section. This makes some sense, because this should be writable memory anyway. However the BSS section is not cleared or used until later in the setup process (after relocation), so memory nearby might not be available early enough to host the initial stack. This is an issue if U-Boot is loaded from (Flash-)ROM, for instance. Allow CONFIG_INIT_SP_RELATIVE to be turned off by a board's config, to be able to select a fixed stack pointer, for instance in known good DRAM. This will help QEMU utilising PIE, when it's loaded to (Flash-)ROM. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | arm64: PIE: Do not skip static relocationAndre Przywara2020-10-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we build an arm64 target and enable POSITION_INDEPENDENT, we were skipping our build-time dynamic relocation fixup routine (STATIC_RELA). This was probably done because we didn't need it in this case, as the PIE fixup routine in start.S would take care of that at runtime. However when we now skip this routine (upon detecting that the fixup offset is 0), this might lead to uninitialised pointers. Remove the exception, so that we always do the build-time relocation. NOTE: GNU binutils starting with v2.27.1 do this build-time relocation automatically, to be in-line with other architecures. So on newer toolchains our manual fixup is actually not needed. It doesn't hurt to have it, though, so that we keep compatibility with the popular Linaro toolchains, which lack this feature. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | arm: Kconfig: Explain TFABOOTAndre Przywara2020-10-081-2/+7
|/ | | | | | | | | | The CONFIG_TFABOOT option is more about what U-Boot DOES NOT need to do than to support some features. Explain a bit more in the Kconfig help text to avoid misunderstandings. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: rmobile: Use imply for BOARD_EARLY_INIT_FBiju Das2020-09-261-1/+1
| | | | | | | | | | | Use "imply" instead of "select" for BOARD_EARLY_INIT_F config option, and then disable it on boards which don't need it. Updated grpeach_defconfig to disable CONFIG_BOARD_EARLY_INIT_F option for RZA1. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
* Merge tag 'xilinx-for-v2021.01' of ↵Tom Rini2020-09-241-7/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.01 arm64: - Support for bigger U-Boot images compiled with PIE microblaze: - Extend support for LE/BE systems zynqmp: - Refactor silicon ID detection code with using firmware interface - Add support for saving variables based on bootmode zynqmp-r5: - Fix MPU mapping and defconfig setting. xilinx: - Minor driver changes: names alignment - Enable UBIFS - Minor DT and macros fixes - Fix boot with appended DT - Fix distro boot cmd: - pxe: Add fixing for platforms with manual relocation support clk: - fixed_rate: Add DM flag to support early boot on r5 fpga: - zynqmppl: Use only firmware interface and enable SPL build serial: - uartlite: Enable for ARM systems and support endians mmc: - zynq: Fix indentation net: - gem: Support for multiple phys - emac: Fix 64bit support and enable it for arm64 kconfig: - Setup default values for Xilinx platforms - Fix dependecies for Xilinx drivers - Source board Kconfig only when platform is enabled - Fix FPGA Kconfig entry with SPL - Change some defconfig values bindings: - Add binding doc for vsc8531
| * ARM: zynqmp: Fix SPL_DM_SPI dependenciesMichal Simek2020-09-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | Add missing dependencies for DM_SPI_FLASH. Kconfig reports it as: WARNING: unmet direct dependencies detected for SPL_DM_SPI_FLASH Depends on [n]: SPL [=n] && SPL_DM [=n] Selected by [y]: - ARCH_ZYNQMP [=y] && <choice> && SPL_DM_SPI [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * xilinx: kconfig: Move sourcing of board Kconfig to mach foldersMichal Simek2020-09-231-4/+0
| | | | | | | | | | | | | | Do not source xilinx board Kconfig by other boards. These configs should be available only when Xilinx platforms are selected. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * arm64: Mention 4K aligned load addresses in the PIE Kconfig helpEdgar E. Iglesias2020-09-221-2/+2
| | | | | | | | | | | | | | | | | | | | Mention the requirement of 4K aligned load addresses in the help section for the POSITION_INDEPENDENT option. Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | IPQ40xx: Add reset controller supportRobert Marko2020-09-181-0/+1
| | | | | | | | | | | | | | Since we have a driver for the reset controller, lets add the necessary node. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | IPQ40xx: Add SMEM supportRobert Marko2020-09-181-0/+2
|/ | | | | | | There is already existing driver for SMEM so lets enable it for IPQ40xx as well. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini2020-08-251-0/+24
|\ | | | | | | | | | | | | - Add basic Marvell/Cavium OcteonTX/TX2 support (Suneel) - Infrastructure changes to PCI uclass to support these SoC's (Suneel) - Add PCI, MMC & watchdog driver drivers for OcteonTX/TX2 (Suneel) - Increase CONFIG_SYS_MALLOC_F_LEN for qemu-x86 (Stefan)
| * arm: octeontx2: Add support for OcteonTX2 SoC platformsSuneel Garapati2020-08-251-0/+14
| | | | | | | | | | | | | | | | | | This patch adds support for all OcteonTX2 96xx/95xx boards from Marvell. For 96xx boards, use octeontx_96xx_defconfig and for 95xx boards, use octeontx_95xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
| * arm: octeontx: Add support for OcteonTX SoC platformsSuneel Garapati2020-08-251-0/+10
| | | | | | | | | | | | | | | | | | This patch adds support for all OcteonTX 81xx/83xx boards from Marvell. For 81xx boards, use octeontx_81xx_defconfig and for 83xx boards, use octeontx_83xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
* | board: armltd: Add support for Total Compute platformUsama Arif2020-08-241-0/+11
|/ | | | | | | | | | | | | Total Compute is based on ARM architecture and has the following features enabled in u-boot: - PL011 UART - PL180 MMC - NOR Flash - FIT image with Signature - AVB Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIGMichal Simek2020-08-201-0/+3
| | | | | | | Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating variables with run time information. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* xilinx: versal: Add new versal loadpdi commandT Karthik Reddy2020-08-201-0/+1
| | | | | | | | Versal loadpdi command is used for loading secure & non-secure pdi images. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* xen: Port Xen bus driver from mini-osOleksandr Andrushchenko2020-08-141-0/+1
| | | | | | | Make required updates to run on u-boot and strip test code. Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
* serial: serial_xen: Add Xen PV serial driverPeng Fan2020-08-141-0/+1
| | | | | | | | | | | | | Add support for Xen para-virtualized serial driver. This driver fully supports serial console for the virtual machine. Please note that as the driver is initialized late, so no banner nor memory size is visible. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2026-01-08 05:10:40 +0000