diff options
Diffstat (limited to 'include')
27 files changed, 205 insertions, 103 deletions
diff --git a/include/addr_map.h b/include/addr_map.h index d322dd222a..55d3a6a165 100644 --- a/include/addr_map.h +++ b/include/addr_map.h @@ -8,9 +8,17 @@ #include <asm/types.h> -extern phys_addr_t addrmap_virt_to_phys(void *vaddr); -extern void *addrmap_phys_to_virt(phys_addr_t paddr); -extern void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr, - phys_size_t size, int idx); +struct addrmap { + phys_addr_t paddr; + phys_size_t size; + unsigned long vaddr; +}; + +extern struct addrmap address_map[CONFIG_SYS_NUM_ADDR_MAP]; + +phys_addr_t addrmap_virt_to_phys(void *vaddr); +void *addrmap_phys_to_virt(phys_addr_t paddr); +void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr, + phys_size_t size, int idx); #endif diff --git a/include/charset.h b/include/charset.h index cc650a2ce7..a911160f19 100644 --- a/include/charset.h +++ b/include/charset.h @@ -14,6 +14,11 @@ #define MAX_UTF8_PER_UTF16 3 /** + * codepage_437 - Unicode to codepage 437 translation table + */ +extern const u16 codepage_437[128]; + +/** * console_read_unicode() - read Unicode code point from console * * @code: pointer to store Unicode code point @@ -270,4 +275,33 @@ u16 *u16_strdup(const void *src); */ uint8_t *utf16_to_utf8(uint8_t *dest, const uint16_t *src, size_t size); +/** + * utf_to_cp() - translate Unicode code point to 8bit codepage + * + * Codepoints that do not exist in the codepage are rendered as question mark. + * + * @c: pointer to Unicode code point to be translated + * @codepage: Unicode to codepage translation table + * Return: 0 on success, -ENOENT if codepoint cannot be translated + */ +int utf_to_cp(s32 *c, const u16 *codepage); + +/** + * utf8_to_cp437_stream() - convert UTF-8 stream to codepage 437 + * + * @c: next UTF-8 character to convert + * @buffer: buffer, at least 5 characters + * Return: next codepage 437 character or 0 + */ +int utf8_to_cp437_stream(u8 c, char *buffer); + +/** + * utf8_to_utf32_stream() - convert UTF-8 stream to UTF-32 + * + * @c: next UTF-8 character to convert + * @buffer: buffer, at least 5 characters + * Return: next codepage 437 character or 0 + */ +int utf8_to_utf32_stream(u8 c, char *buffer); + #endif /* __CHARSET_H_ */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index b1c8917f21..ea4da6a5fe 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -18,8 +18,6 @@ #define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#define CONFIG_FSL_VIA - #ifndef __ASSEMBLY__ extern unsigned long get_clock_freq(void); #endif diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 0605f70ffc..9f83931bed 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -23,8 +23,6 @@ #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ -#define CONFIG_FSL_VIA - #ifndef __ASSEMBLY__ #include <linux/stringify.h> extern unsigned long get_clock_freq(void); diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 88999ef2b8..79e309c95c 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -18,8 +18,6 @@ #define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#define CONFIG_FSL_VIA - #ifndef __ASSEMBLY__ extern unsigned long get_clock_freq(void); #endif diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h index b39a5b4ca4..76d73086fb 100644 --- a/include/configs/am65x_evm.h +++ b/include/configs/am65x_evm.h @@ -30,7 +30,7 @@ * our memory footprint. The less we use for BSS the more we have available * for everything else. */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x5000 +#define CONFIG_SPL_BSS_MAX_SIZE 0xc00 /* * Link BSS to be within SPL in a dedicated region located near the top of * the MCU SRAM, this way making it available also before relocation. Note diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index b474b2f522..8fe3226cf9 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -21,9 +21,6 @@ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* Networking */ -#define FEC_QUIRK_ENET_MAC -#define FEC_ENET_ENABLE_TXC_DELAY - #define CONFIG_TFTP_TSIZE #define CONFIG_IPADDR 192.168.10.2 diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h index db31c210f5..fdb0da34ec 100644 --- a/include/configs/apalis-imx8x.h +++ b/include/configs/apalis-imx8x.h @@ -25,9 +25,6 @@ #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SERVERIP 192.168.10.1 -#define FEC_ENET_ENABLE_TXC_DELAY -#define FEC_ENET_ENABLE_RXC_DELAY - #define MEM_LAYOUT_ENV_SETTINGS \ "kernel_addr_r=0x80280000\0" \ "fdt_addr_r=0x83100000\0" \ @@ -143,7 +140,6 @@ #define CONFIG_FEC_MXC_PHYADDR 0x4 #define CONFIG_ETHPRIME "eth0" #define CONFIG_FEC_XCV_TYPE RGMII -#define FEC_QUIRK_ENET_MAC #define PHY_ANEG_TIMEOUT 20000 #endif /* __APALIS_IMX8X_H */ diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 7c168f17d5..b310e6c9e5 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -43,7 +43,6 @@ /* ENET Config */ #define CONFIG_FEC_XCV_TYPE RMII -#define FEC_QUIRK_ENET_MAC /* ENET1 connects to base board and MUX with ESAI */ #define CONFIG_FEC_ENET_DEV 1 diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index fc2c191594..59593f6c00 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -22,8 +22,6 @@ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* Networking */ -#define FEC_QUIRK_ENET_MAC - #define CONFIG_TFTP_TSIZE #define CONFIG_IPADDR 192.168.10.2 diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 0f41748093..883cbc95d2 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -215,6 +215,10 @@ #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 +#ifndef CONFIG_MTD_NOR_FLASH +#define CONFIG_SPL_PAD_TO 32768 +#endif + #ifdef CONFIG_SPL_BUILD /* defines for SPL */ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ @@ -222,7 +226,7 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_MAX_FOOTPRINT 32768 -#define CONFIG_SPL_PAD_TO 32768 + #endif /* Load U-Boot Image From MMC */ diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h new file mode 100644 index 0000000000..a406e91c84 --- /dev/null +++ b/include/configs/imx8mm_venice.h @@ -0,0 +1,125 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2021 Gateworks Corporation + */ + +#ifndef __IMX8MM_VENICE_H +#define __IMX8MM_VENICE_H + +#include <asm/arch/imx-regs.h> +#include <linux/sizes.h> + +#define CONFIG_SPL_MAX_SIZE (148 * 1024) +#define CONFIG_SYS_MONITOR_LEN SZ_512K +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 +#define CONFIG_SYS_UBOOT_BASE \ + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_STACK 0x920000 +#define CONFIG_SPL_BSS_START_ADDR 0x910000 +#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ + +/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ +#define CONFIG_MALLOC_F_ADDR 0x930000 +/* For RAW image gives a error info not panic */ +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE + +#endif + +#define MEM_LAYOUT_ENV_SETTINGS \ + "fdt_addr_r=0x44000000\0" \ + "kernel_addr_r=0x42000000\0" \ + "ramdisk_addr_r=0x46400000\0" \ + "scriptaddr=0x46000000\0" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x40480000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* Enable Distro Boot */ +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> +#undef CONFIG_ISO_PARTITION +#else +#define BOOTENV +#endif + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + MEM_LAYOUT_ENV_SETTINGS \ + "script=boot.scr\0" \ + "bootm_size=0x10000000\0" \ + "ipaddr=192.168.1.22\0" \ + "serverip=192.168.1.146\0" \ + "dev=2\0" \ + "preboot=gsc wd-disable\0" \ + "console=ttymxc1,115200\0" \ + "update_firmware=" \ + "tftpboot $loadaddr $image && " \ + "setexpr blkcnt $filesize + 0x1ff && " \ + "setexpr blkcnt $blkcnt / 0x200 && " \ + "mmc dev $dev && " \ + "mmc write $loadaddr 0x42 $blkcnt\0" \ + "boot_net=" \ + "tftpboot $kernel_addr_r $image && " \ + "booti $kernel_addr_r - $fdtcontroladdr\0" \ + "update_rootfs=" \ + "tftpboot $loadaddr $image && " \ + "gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \ + "update_all=" \ + "tftpboot $loadaddr $image && " \ + "gzwrite mmc $dev $loadaddr $filesize\0" \ + "erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0" + +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN SZ_32M +#define CONFIG_SYS_SDRAM_BASE 0x40000000 + +/* SDRAM configuration */ +#define PHYS_SDRAM 0x40000000 +#define PHYS_SDRAM_SIZE SZ_1G /* 1GB DDR */ +#define CONFIG_SYS_BOOTM_LEN SZ_256M + +/* UART */ +#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR + +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE SZ_2K +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* USDHC */ +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +/* I2C */ +#define CONFIG_SYS_I2C_SPEED 100000 + +/* FEC */ +#define CONFIG_ETHPRIME "eth0" +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_MXC_PHYADDR 0 +#define FEC_QUIRK_ENET_MAC +#define IMX_FEC_BASE 0x30BE0000 + +#endif diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 7a247cc560..9ce60fd51b 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -126,7 +126,11 @@ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 +#if CONFIG_IS_ENABLED(IMX8MN_BEACON_2GB_LPDDR) +#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ +#else #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ +#endif #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index ff281d3800..99e73a9446 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -173,6 +173,5 @@ /* Networking */ #define CONFIG_FEC_XCV_TYPE RGMII -#define FEC_QUIRK_ENET_MAC #endif /* __IMX8QM_MEK_H */ diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index e5989ebafb..fcbf8eeb34 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -161,7 +161,6 @@ /* Networking */ #define CONFIG_FEC_XCV_TYPE RGMII -#define FEC_QUIRK_ENET_MAC #include <linux/stringify.h> #endif /* __IMX8QM_ROM7720_H */ diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 51a8eb6760..a7d623a9b9 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -177,7 +177,6 @@ /* Networking */ #define CONFIG_FEC_XCV_TYPE RGMII -#define FEC_QUIRK_ENET_MAC /* Misc configuration */ #define CONFIG_SYS_CBSIZE 2048 diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 0dcf844303..4d04833c50 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -326,12 +326,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_VOL_MONITOR_LTC3882_SET #define CONFIG_VOL_MONITOR_LTC3882_READ -/* PM Bus commands code for LTC3882*/ -#define PMBUS_CMD_PAGE 0x0 -#define PMBUS_CMD_READ_VOUT 0x8B -#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 -#define PMBUS_CMD_VOUT_COMMAND 0x21 - #define PWM_CHANNEL0 0x0 /* diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index f59a9f5574..6f36dd417a 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -203,7 +203,7 @@ #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 -#define I2C_MUX_CH_VOL_MONITOR 0xA +#define I2C_MUX_CH_VOL_MONITOR 0xA /* Voltage monitor on channel 2*/ #define I2C_VOL_MONITOR_ADDR 0x63 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 @@ -221,12 +221,6 @@ #define CONFIG_VOL_MONITOR_LTC3882_SET #define CONFIG_VOL_MONITOR_LTC3882_READ -/* PM Bus commands code for LTC3882*/ -#define PMBUS_CMD_PAGE 0x0 -#define PMBUS_CMD_READ_VOUT 0x8B -#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 -#define PMBUS_CMD_VOUT_COMMAND 0x21 - #define PWM_CHANNEL0 0x0 /* diff --git a/include/configs/meson64.h b/include/configs/meson64.h index 52cc01f73d..7e97f89052 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -80,6 +80,7 @@ "scriptaddr=0x08000000\0" \ "kernel_addr_r=0x08080000\0" \ "pxefile_addr_r=0x01080000\0" \ + "fdtoverlay_addr_r=0x01000000\0" \ "ramdisk_addr_r=0x13000000\0" \ "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ BOOTENV diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 49f88c27dc..3574d65451 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -51,14 +51,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_NUM 2 -/* - * Eth Configs - */ - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - /* USB Configs */ #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index a0dd33aecd..e5dc9ac1d9 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -30,12 +30,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_ESDHC_NUM 2 -/* Eth Configs */ - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - /* USB Configs */ #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 93d00a4dc3..ac579f3338 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -73,11 +73,14 @@ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=PARTUUID=${uuid} rootwait rw\0" \ "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} || " \ + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \ + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} || " \ + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \ + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} || " \ + "load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run finduuid; " \ "run mmcargs; " \ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 3f2700d8e2..23368de624 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -70,10 +70,12 @@ /* USB device configuration */ #define CONFIG_USB_DEVICE +#define CONFIG_USB_TTY #define CONFIG_USBD_VENDORID 0x0421 -#define CONFIG_USBD_PRODUCTID 0x01c8 +#define CONFIG_USBD_PRODUCTID_CDCACM 0x01c8 +#define CONFIG_USBD_PRODUCTID_GSERIAL 0x01c8 #define CONFIG_USBD_MANUFACTURER "Nokia" -#define CONFIG_USBD_PRODUCT_NAME "N900" +#define CONFIG_USBD_PRODUCT_NAME "N900 (U-Boot)" #define GPIO_SLIDE 71 @@ -108,15 +110,9 @@ int rx51_kp_getc(struct stdio_dev *sdev); /* Environment information */ #define CONFIG_EXTRA_ENV_SETTINGS \ "usbtty=cdc_acm\0" \ - "stdin=serial,vga\0" \ - "stdout=serial,vga\0" \ - "stderr=serial,vga\0" \ - "setcon=setenv stdin ${con};" \ - "setenv stdout ${con};" \ - "setenv stderr ${con}\0" \ - "sercon=setenv con serial; run setcon\0" \ - "usbcon=setenv con usbtty; run setcon\0" \ - "vgacon=setenv con vga; run setcon\0" \ + "stdin=usbtty,serial,vga\0" \ + "stdout=usbtty,serial,vga\0" \ + "stderr=usbtty,serial,vga\0" \ "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ "switchmmc=mmc dev ${mmcnum}\0" \ "kernaddr=0x82008000\0" \ @@ -198,9 +194,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); #define CONFIG_POSTBOOTMENU \ "echo;" \ "echo Extra commands:;" \ - "echo run sercon - Use serial port for control.;" \ - "echo run usbcon - Use usbtty for control.;" \ - "echo run vgacon - Use framebuffer/keyboard.;" \ "echo run sdboot - Boot from SD card slot.;" \ "echo run emmcboot - Boot internal eMMC memory.;" \ "echo run attachboot - Boot attached kernel image.;" \ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index ee6ef18224..b2e1204e0f 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_RAMBOOT -#define CONFIG_PCI1 1 /* PCI controller 1 */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #define CONFIG_ENABLE_36BIT_PHYS @@ -35,7 +33,7 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* Virtual address range for PCI region maps */ #define CONFIG_SYS_PCI_MAP_START 0x80000000 -#define CONFIG_SYS_PCI_MAP_END 0xe8000000 +#define CONFIG_SYS_PCI_MAP_END 0xe0000000 /* Virtual address to a temporary map if we need it (max 128MB) */ #define CONFIG_SYS_TMPVIRT 0xe8000000 @@ -73,29 +71,11 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#endif /* CONFIG_PCI */ - #define CONFIG_LBA48 +/* RTC */ +#define CONFIG_RTC_PT7C4338 + /* * Environment */ @@ -126,6 +106,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_LOADADDR 1000000 #define CONFIG_BOOTCOMMAND \ - "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0" + "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr\0" #endif /* __QEMU_PPCE500_H */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index fdcd7d3e9a..1cfa190047 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -79,19 +79,13 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #endif /* CONFIG_CADENCE_QSPI */ /* - * Boot arguments passed to the boot command. The value of - * CONFIG_BOOTARGS goes into the environment value "bootargs". - * Do note the value will override also the chosen node in FDT blob. + * Environment variable */ #ifdef CONFIG_FIT #define CONFIG_BOOTFILE "kernel.itb" -#define CONFIG_BOOTCOMMAND "run fatscript; run mmcfitload;run linux_qspi_enable;" \ - "run mmcfitboot" #else #define CONFIG_BOOTFILE "Image" -#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \ - "run mmcboot" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -200,7 +194,7 @@ unsigned int cm_get_l4_sys_free_clk_hz(void); * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB) * */ -#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex" +#define CONFIG_SPL_TARGET "spl/u-boot-spl-dtb.hex" #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index 36e400453e..db2117a3d7 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -160,7 +160,6 @@ * and the ramdisk at the end. */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootdelay=1\0" \ "kernel_addr_r=0xc2000000\0" \ "fdt_addr_r=0xc4000000\0" \ "scriptaddr=0xc4100000\0" \ diff --git a/include/test/suites.h b/include/test/suites.h index 52e8fc8155..f5d8e139ce 100644 --- a/include/test/suites.h +++ b/include/test/suites.h @@ -26,6 +26,8 @@ int cmd_ut_category(const char *name, const char *prefix, struct unit_test *tests, int n_ents, int argc, char *const argv[]); +int do_ut_addrmap(struct cmd_tbl *cmdtp, int flag, int argc, + char *const argv[]); int do_ut_bootm(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); int do_ut_bloblist(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); |