diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/dbau1x00.h | 172 |
1 files changed, 0 insertions, 172 deletions
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h deleted file mode 100644 index 82860bbaa8..0000000000 --- a/include/configs/dbau1x00.h +++ /dev/null @@ -1,172 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -/* - * This file contains the configuration parameters for the dbau1x00 board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ - -#ifdef CONFIG_DBAU1000 -/* Also known as Merlot */ -#define CONFIG_SOC_AU1000 1 -#else -#ifdef CONFIG_DBAU1100 -#define CONFIG_SOC_AU1100 1 -#else -#ifdef CONFIG_DBAU1500 -#define CONFIG_SOC_AU1500 1 -#else -#ifdef CONFIG_DBAU1550 -/* Cabernet */ -#define CONFIG_SOC_AU1550 1 -#else -#error "No valid board set" -#endif -#endif -#endif -#endif - -/* valid baudrates */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "panic=1\0" \ - "bootfile=/tftpboot/vmlinux.srec\0" \ - "load=tftp 80500000 ${u-boot}\0" \ - "" - -#ifdef CONFIG_DBAU1550 -/* Boot from flash by default, revert to bootp */ -#define CONFIG_BOOTCOMMAND "bootm 0xbfc20000; bootp; bootm" -#else /* CONFIG_DBAU1550 */ -#define CONFIG_BOOTCOMMAND "bootp;bootm" -#endif /* CONFIG_DBAU1550 */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Command line configuration. - */ - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MHZ 396 - -#if (CONFIG_SYS_MHZ % 12) != 0 -#error "Invalid CPU frequency - must be multiple of 12!" -#endif - -#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ - -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80100000 -#define CONFIG_SYS_MEMTEST_END 0x80800000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#ifdef CONFIG_DBAU1550 - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (512) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */ - -#else /* CONFIG_DBAU1550 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */ - -#endif /* CONFIG_DBAU1550 */ - -#define CONFIG_SYS_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} - -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -/* We boot from this flash, selected with dip switch */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_2 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xB0030000 -#define CONFIG_ENV_SIZE 0x10000 - -#define CONFIG_FLASH_16BIT - -#define CONFIG_NR_DRAM_BANKS 2 - -#ifdef CONFIG_DBAU1550 -#define MEM_SIZE 192 -#else -#define MEM_SIZE 64 -#endif - -#define CONFIG_MEMSIZE_IN_BYTES - -#ifndef CONFIG_DBAU1550 -/*---ATA PCMCIA ------------------------------------*/ -#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000 -#define CONFIG_PCMCIA_SLOT_A - -#define CONFIG_ATAPI 1 - -/* We run CF in "true ide" mode or a harddrive via pcmcia */ -#define CONFIG_IDE_PCMCIA 1 - -/* We only support one slot for now */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET 8 - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 -#endif /* CONFIG_DBAU1550 */ - -#endif /* __CONFIG_H */ |