diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/apalis-tk1.h | 44 |
1 files changed, 15 insertions, 29 deletions
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index b4ddd1bdc6..dacf36bf79 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -18,6 +18,9 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE +#define FDT_MODULE "apalis-v1.2" +#define FDT_MODULE_V1_0 "apalis" + /* Environment in eMMC, before config block at the end of 1st "boot sector" */ #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ CONFIG_TDX_CFG_BLOCK_OFFSET) @@ -42,7 +45,7 @@ #define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \ "boot part 0 1 mmcpart 0; " \ "rootfs part 0 2 mmcpart 0; " \ - "uImage fat 0 1 mmcpart 0; " \ + "zImage fat 0 1 mmcpart 0; " \ "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0" #define EMMC_BOOTCMD \ @@ -54,11 +57,11 @@ "run emmcdtbload; " \ "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} - ${dtbparam}\0" \ + "bootz ${kernel_addr_r} - ${dtbparam}\0" \ "emmcbootpart=1\0" \ "emmcdev=0\0" \ "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ - "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb && " \ + "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb && " \ "setenv dtbparam ${fdt_addr_r}\0" \ "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \ "emmcrootpart=2\0" @@ -68,9 +71,9 @@ "nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \ "${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ "run nfsdtbload; dhcp ${kernel_addr_r} " \ - "&& run fdt_fixup && bootm ${kernel_addr_r} - ${dtbparam}\0" \ + "&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \ - "${soc}-apalis-${fdt_board}.dtb " \ + "${soc}-${fdt_module}-${fdt_board}.dtb " \ "&& setenv dtbparam ${fdt_addr_r}\0" #define SD_BOOTCMD \ @@ -81,44 +84,28 @@ "${vidargs}; echo Booting from SD card in 8bit slot...; " \ "run sddtbload; load mmc ${sddev}:${sdbootpart} " \ "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} - ${dtbparam}\0" \ + "bootz ${kernel_addr_r} - ${dtbparam}\0" \ "sdbootpart=1\0" \ "sddev=1\0" \ "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \ - "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \ + "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \ "&& setenv dtbparam ${fdt_addr_r}\0" \ "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ "sdrootpart=2\0" -#define USB_BOOTCMD \ - "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro " \ - "rootfstype=ext4 rootwait\0" \ - "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \ - "setenv bootargs ${defargs} ${setupargs} " \ - "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ - "run usbdtbload; load usb ${usbdev}:${usbbootpart} " \ - "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} - ${dtbparam}\0" \ - "usbbootpart=1\0" \ - "usbdev=0\0" \ - "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \ - "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \ - "&& setenv dtbparam ${fdt_addr_r}\0" \ - "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \ - "usbrootpart=2\0" - #define BOARD_EXTRA_ENV_SETTINGS \ - "boot_file=uImage\0" \ + "boot_file=zImage\0" \ "console=ttyS0\0" \ "defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \ - "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0\0" \ + "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \ + "user_debug=30 pcie_aspm=off\0" \ "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ EMMC_BOOTCMD \ "fdt_board=eval\0" \ "fdt_fixup=;\0" \ + "fdt_module=" FDT_MODULE "\0" \ NFS_BOOTCMD \ SD_BOOTCMD \ - USB_BOOTCMD \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \ "flash_eth.img && source ${loadaddr}\0" \ @@ -135,8 +122,7 @@ "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ "source ${loadaddr}\0" \ - USB_BOOTCMD \ - "vidargs=video=tegrafb0:640x480-16@60 fbcon=map:1\0" + "vidargs=fbcon=map:1\0" /* Increase console I/O buffer size */ #undef CONFIG_SYS_CBSIZE |