diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/fec_mxc.c | 17 | ||||
| -rw-r--r-- | drivers/net/tsec.c | 9 |
2 files changed, 6 insertions, 20 deletions
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index c17f9379bf..0d0f392d1e 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -312,21 +312,8 @@ static void fec_rbd_clean(int last, struct fec_bd *pRbd) static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac) { -/* - * The MX27 can store the mac address in internal eeprom - * This mechanism is not supported now by MX51 or MX25 - */ -#if defined(CONFIG_MX51) || defined(CONFIG_MX25) - return -1; -#else - struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; - int i; - - for (i = 0; i < 6; i++) - mac[6-1-i] = readl(&iim->iim_bank_area0[IIM0_MAC + i]); - + imx_get_mac_from_fuse(mac); return !is_valid_ether_addr(mac); -#endif } static int fec_set_hwaddr(struct eth_device *dev) @@ -754,7 +741,7 @@ static int fec_probe(bd_t *bd) eth_register(edev); if (fec_get_hwaddr(edev, ethaddr) == 0) { - printf("got MAC address from EEPROM: %pM\n", ethaddr); + printf("got MAC address from fuse: %pM\n", ethaddr); memcpy(edev->enetaddr, ethaddr, 6); } diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 9b5dd92fbb..77908d1e12 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -5,7 +5,7 @@ * terms of the GNU Public License, Version 2, incorporated * herein by reference. * - * Copyright 2004-2009 Freescale Semiconductor, Inc. + * Copyright 2004-2010 Freescale Semiconductor, Inc. * (C) Copyright 2003, Motorola, Inc. * author Andy Fleming * @@ -292,13 +292,12 @@ static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, /* By default force the TBI PHY into 1000Mbps full duplex when in SGMII mode */ #ifndef CONFIG_TSEC_TBICR_SETTINGS -#define TBICR_SETTINGS ( \ +#define CONFIG_TSEC_TBICR_SETTINGS ( \ TBICR_PHY_RESET \ + | TBICR_ANEG_ENABLE \ | TBICR_FULL_DUPLEX \ | TBICR_SPEED1_SET \ ) -#else -#define TBICR_SETTINGS CONFIG_TSEC_TBICR_SETTINGS #endif /* CONFIG_TSEC_TBICR_SETTINGS */ /* Configure the TBI for SGMII operation */ @@ -311,7 +310,7 @@ static void tsec_configure_serdes(struct tsec_private *priv) tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON, TBICON_CLK_SELECT); tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR, - TBICR_SETTINGS); + CONFIG_TSEC_TBICR_SETTINGS); } /* Discover which PHY is attached to the device, and configure it |