summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/nand_spl_loaders.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/raw/nand_spl_loaders.c')
-rw-r--r--drivers/mtd/nand/raw/nand_spl_loaders.c104
1 files changed, 104 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/nand_spl_loaders.c b/drivers/mtd/nand/raw/nand_spl_loaders.c
new file mode 100644
index 0000000000..177c12b581
--- /dev/null
+++ b/drivers/mtd/nand/raw/nand_spl_loaders.c
@@ -0,0 +1,104 @@
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
+{
+ unsigned int block, lastblock;
+ unsigned int page, page_offset;
+
+ /* offs has to be aligned to a page address! */
+ block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
+ lastblock = (offs + size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE;
+ page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
+ page_offset = offs % CONFIG_SYS_NAND_PAGE_SIZE;
+
+ while (block <= lastblock) {
+ if (!nand_is_bad_block(block)) {
+ /* Skip bad blocks */
+ while (page < CONFIG_SYS_NAND_PAGE_COUNT) {
+ nand_read_page(block, page, dst);
+ /*
+ * When offs is not aligned to page address the
+ * extra offset is copied to dst as well. Copy
+ * the image such that its first byte will be
+ * at the dst.
+ */
+ if (unlikely(page_offset)) {
+ memmove(dst, dst + page_offset,
+ CONFIG_SYS_NAND_PAGE_SIZE);
+ dst = (void *)((int)dst - page_offset);
+ page_offset = 0;
+ }
+ dst += CONFIG_SYS_NAND_PAGE_SIZE;
+ page++;
+ }
+
+ page = 0;
+ } else {
+ lastblock++;
+ }
+
+ block++;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_UBI
+/*
+ * Temporary storage for non NAND page aligned and non NAND page sized
+ * reads. Note: This does not support runtime detected FLASH yet, but
+ * that should be reasonably easy to fix by making the buffer large
+ * enough :)
+ */
+static u8 scratch_buf[CONFIG_SYS_NAND_PAGE_SIZE];
+
+/**
+ * nand_spl_read_block - Read data from physical eraseblock into a buffer
+ * @block: Number of the physical eraseblock
+ * @offset: Data offset from the start of @peb
+ * @len: Data size to read
+ * @dst: Address of the destination buffer
+ *
+ * This could be further optimized if we'd have a subpage read
+ * function in the simple code. On NAND which allows subpage reads
+ * this would spare quite some time to readout e.g. the VID header of
+ * UBI.
+ *
+ * Notes:
+ * @offset + @len are not allowed to be larger than a physical
+ * erase block. No sanity check done for simplicity reasons.
+ *
+ * To support runtime detected flash this needs to be extended by
+ * information about the actual flash geometry, but thats beyond the
+ * scope of this effort and for most applications where fast boot is
+ * required it is not an issue anyway.
+ */
+int nand_spl_read_block(int block, int offset, int len, void *dst)
+{
+ int page, read;
+
+ /* Calculate the page number */
+ page = offset / CONFIG_SYS_NAND_PAGE_SIZE;
+
+ /* Offset to the start of a flash page */
+ offset = offset % CONFIG_SYS_NAND_PAGE_SIZE;
+
+ while (len) {
+ /*
+ * Non page aligned reads go to the scratch buffer.
+ * Page aligned reads go directly to the destination.
+ */
+ if (offset || len < CONFIG_SYS_NAND_PAGE_SIZE) {
+ nand_read_page(block, page, scratch_buf);
+ read = min(len, CONFIG_SYS_NAND_PAGE_SIZE - offset);
+ memcpy(dst, scratch_buf + offset, read);
+ offset = 0;
+ } else {
+ nand_read_page(block, page, dst);
+ read = CONFIG_SYS_NAND_PAGE_SIZE;
+ }
+ page++;
+ len -= read;
+ dst += read;
+ }
+ return 0;
+}
+#endif