diff options
Diffstat (limited to 'doc/board/st/stm32mp1.rst')
| -rw-r--r-- | doc/board/st/stm32mp1.rst | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index 20f5c9e301..f0c2b09b98 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -237,7 +237,8 @@ Build Procedure - For Basic boot - FSBL = spl/u-boot-spl.stm32 - - SSBL = u-boot.img + - SSBL = u-boot.img (without CONFIG_SPL_LOAD_FIT) or + u-boot.itb (with CONFIG_SPL_LOAD_FIT=y) Switch Setting for Boot Mode ---------------------------- @@ -347,7 +348,9 @@ c) copy the FSBL (2 times) and SSBL file on the correct partition. # dd if=u-boot-spl.stm32 of=/dev/mmcblk0p1 # dd if=u-boot-spl.stm32 of=/dev/mmcblk0p2 - # dd if=u-boot.img of=/dev/mmcblk0p3 + # dd if=u-boot.img of=/dev/mmcblk0p3 # Without CONFIG_SPL_LOAD_FIT + OR + dd if=u-boot.itb of=/dev/mmcblk0p3 # With CONFIG_SPL_LOAD_FIT=y for trusted boot mode: :: @@ -363,8 +366,9 @@ Prepare eMMC You can use U-Boot to copy binary in eMMC. In the next example, you need to boot from SD card and the images -(u-boot-spl.stm32, u-boot.img) are presents on SD card (mmc 0) -in ext4 partition 4 (bootfs). +(u-boot-spl.stm32, u-boot.img for systems without CONFIG_SPL_LOAD_FIT +or u-boot.itb for systems with CONFIG_SPL_LOAD_FIT=y) are presents on +SD card (mmc 0) in ext4 partition 4 (bootfs). To boot from SD card, select BootPinMode = 1 0 1 and reset. @@ -387,7 +391,9 @@ b) copy SPL on eMMC on firts boot partition c) copy U-Boot in first GPT partition of eMMC:: - # ext4load mmc 0:4 0xC0000000 u-boo t.img + # ext4load mmc 0:4 0xC0000000 u-boot.img # Without CONFIG_SPL_LOAD_FIT + OR + ext4load mmc 0:4 0xC0000000 u-boot.itb # With CONFIG_SPL_LOAD_FIT=y # mmc dev 1 # part start mmc 1 1 partstart # mmc write ${fileaddr} ${partstart} ${filesize} |