summaryrefslogtreecommitdiffstats
path: root/doc/README.nokia_rx51
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.nokia_rx51')
-rw-r--r--doc/README.nokia_rx5115
1 files changed, 1 insertions, 14 deletions
diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51
index 320b5efc7d..84d1912ddd 100644
--- a/doc/README.nokia_rx51
+++ b/doc/README.nokia_rx51
@@ -24,8 +24,7 @@ called u-boot-gen-combined. It is available in following repository:
There is support for hardware watchdog. Hardware watchdog is started by
NOLO so u-boot must kick watchdog to prevent reboot device (but not very
often, max every 2 seconds). There is also support for framebuffer display
-output with ANSI escape codes and the N900 HW keyboard input. USB tty works
-but is disabled because it prevents the current Maemo kernel from booting.
+output with ANSI escape codes and the N900 HW keyboard input.
When U-Boot is starting it enable IBE bit in Auxiliary Control Register,
which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
@@ -49,10 +48,6 @@ Boot from SD or eMMC in this order:
Available additional commands/variables:
- * run sercon - Use serial port for control
- * run usbcon - Use usbtty for control
- * run vgacon - Use framebuffer and HW keyboard for control (default)
-
* run sdboot - Boot from external SD card (see boot order)
* run emmcboot - Boot from internal eMMC memory (see boot order)
* run attachboot - Boot attached kernel image (attached to U-Boot binary)
@@ -87,14 +82,6 @@ Additional variables for booting kernel:
and u-boot standard output is set to serial then setup_console_atag is
automatically set to 1. So output from Maemo kernel would go to serial port.
-USB TTY:
-
- Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled.
- For enabling USB TTY just add this line to file include/configs/nokia_rx51.h
-
- #define CONFIG_USB_TTY
-
-
UBIFS support:
UBIFS support is disabled, because U-Boot image is too big and cannot be