diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/solidrun/mx6cuboxi/mx6cuboxi.c | 119 |
1 files changed, 72 insertions, 47 deletions
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index d6e0c83e0d..6a96f9ecdb 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -66,6 +66,8 @@ enum board_type { UNKNOWN = 0x03, }; +static struct gpio_desc board_detect_desc[5]; + #define MEM_STRIDE 0x4000000 static u32 get_ram_size_stride_test(u32 *base, u32 maxsize) { @@ -155,10 +157,6 @@ static iomux_v3_cfg_t const som_rev_detect[] = { IOMUX_PADS(PAD_CSI0_DAT18__GPIO6_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL)), }; -static iomux_v3_cfg_t const usb_pads[] = { - IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), -}; - static void setup_iomux_uart(void) { SETUP_IOMUX_PADS(uart1_pads); @@ -176,7 +174,7 @@ static struct fsl_esdhc_cfg emmc_cfg = { int board_mmc_get_env_dev(int devno) { - return devno - 1; + return devno; } #define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4) @@ -198,27 +196,6 @@ int board_mmc_getcd(struct mmc *mmc) return ret; } -static int mmc_init_main(bd_t *bis) -{ - int ret; - - /* - * Following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 Carrier board MicroSD - * mmc1 SOM eMMC - */ - SETUP_IOMUX_PADS(usdhc2_pads); - usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - ret = fsl_esdhc_initialize(bis, &usdhc_cfg); - if (ret) - return ret; - - SETUP_IOMUX_PADS(usdhc3_pads); - emmc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - return fsl_esdhc_initialize(bis, &emmc_cfg); -} - static int mmc_init_spl(bd_t *bis) { struct src *psrc = (struct src *)SRC_BASE_ADDR; @@ -252,7 +229,7 @@ int board_mmc_init(bd_t *bis) if (IS_ENABLED(CONFIG_SPL_BUILD)) return mmc_init_spl(bis); - return mmc_init_main(bis); + return 0; } static iomux_v3_cfg_t const enet_pads[] = { @@ -284,12 +261,29 @@ static iomux_v3_cfg_t const enet_pads[] = { static void setup_iomux_enet(void) { + struct gpio_desc desc; + int ret; + SETUP_IOMUX_PADS(enet_pads); + ret = dm_gpio_lookup_name("GPIO4_15", &desc); + if (ret) { + printf("%s: phy reset lookup failed\n", __func__); + return; + } + + ret = dm_gpio_request(&desc, "phy-reset"); + if (ret) { + printf("%s: phy reset request failed\n", __func__); + return; + } + gpio_direction_output(ETH_PHY_RESET, 0); mdelay(10); gpio_set_value(ETH_PHY_RESET, 1); udelay(100); + + gpio_free_list_nodev(&desc, 1); } int board_phy_config(struct phy_device *phydev) @@ -434,21 +428,6 @@ static int setup_display(void) } #endif /* CONFIG_VIDEO_IPUV3 */ -#ifdef CONFIG_USB_EHCI_MX6 -static void setup_usb(void) -{ - SETUP_IOMUX_PADS(usb_pads); -} - -int board_ehci_hcd_init(int port) -{ - if (port == 1) - gpio_direction_output(USB_H1_VBUS, 1); - - return 0; -} -#endif - int board_early_init_f(void) { setup_iomux_uart(); @@ -456,10 +435,6 @@ int board_early_init_f(void) #ifdef CONFIG_CMD_SATA setup_sata(); #endif - -#ifdef CONFIG_USB_EHCI_MX6 - setup_usb(); -#endif return 0; } @@ -477,6 +452,29 @@ int board_init(void) return ret; } +static int request_detect_gpios(void) +{ + int node; + int ret; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, + "solidrun,hummingboard-detect"); + if (node < 0) + return -ENODEV; + + ret = gpio_request_list_by_name_nodev(offset_to_ofnode(node), + "detect-gpios", board_detect_desc, + ARRAY_SIZE(board_detect_desc), GPIOD_IS_IN); + + return ret; +} + +static int free_detect_gpios(void) +{ + return gpio_free_list_nodev(board_detect_desc, + ARRAY_SIZE(board_detect_desc)); +} + static enum board_type board_type(void) { int val1, val2, val3; @@ -532,7 +530,7 @@ static bool is_rev_15_som(void) static bool has_emmc(void) { struct mmc *mmc; - mmc = find_mmc_device(1); + mmc = find_mmc_device(2); if (!mmc) return 0; return (mmc_get_op_cond(mmc) < 0) ? 0 : 1; @@ -540,6 +538,8 @@ static bool has_emmc(void) int checkboard(void) { + request_detect_gpios(); + switch (board_type()) { case CUBOXI: puts("Board: MX6 Cubox-i"); @@ -561,13 +561,22 @@ int checkboard(void) else puts("\n"); + free_detect_gpios(); out: return 0; } +/* Override the default implementation, DT model is not accurate */ +int show_board_info(void) +{ + return checkboard(); +} + int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + request_detect_gpios(); + switch (board_type()) { case CUBOXI: env_set("board_name", "CUBOXI"); @@ -594,11 +603,27 @@ int board_late_init(void) if (has_emmc()) env_set("has_emmc", "yes"); + free_detect_gpios(); #endif return 0; } +/* + * This is not a perfect match. Avoid dependency on the DM GPIO driver needed + * for accurate board detection. Hummingboard2 DT is good enough for U-Boot on + * all Hummingboard/Cubox-i platforms. + */ +int board_fit_config_name_match(const char *name) +{ + char tmp_name[36]; + + snprintf(tmp_name, sizeof(tmp_name), "%s-hummingboard2-emmc-som-v15", + is_mx6dq() ? "imx6q" : "imx6dl"); + + return strcmp(name, tmp_name); +} + #ifdef CONFIG_SPL_BUILD #include <asm/arch/mx6-ddr.h> static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = { |