1 files changed, 84 insertions, 0 deletions
diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
new file mode 100644
index 0000000000..21a5a0a252
--- /dev/null
+++ b/board/ti/ks2_evm/ddr3_k2hk.c
@@ -0,0 +1,84 @@
+/*
+ * Keystone2: DDR3 initialization
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include "ddr3_cfg.h"
+#include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
+
+struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
+struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
+
+void ddr3_init(void)
+{
+	char dimm_name[32];
+
+	ddr3_get_dimm_params(dimm_name);
+
+	printf("Detected SO-DIMM [%s]\n", dimm_name);
+
+	if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) {
+		init_pll(&ddr3a_400);
+		if (cpu_revision() > 0) {
+			if (cpu_revision() > 1) {
+				/* PG 2.0 */
+				/* Reset DDR3A PHY after PLL enabled */
+				ddr3_reset_ddrphy();
+				ddr3phy_1600_8g.zq0cr1 |= 0x10000;
+				ddr3phy_1600_8g.zq1cr1 |= 0x10000;
+				ddr3phy_1600_8g.zq2cr1 |= 0x10000;
+				ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
+						 &ddr3phy_1600_8g);
+			} else {
+				/* PG 1.1 */
+				ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
+						 &ddr3phy_1600_8g);
+			}
+
+			ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
+					  &ddr3_1600_8g);
+			printf("DRAM:  Capacity 8 GiB (includes reported below)\n");
+		} else {
+			ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g);
+			ddr3_1600_8g.sdcfg |= 0x1000;
+			ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
+					  &ddr3_1600_8g);
+			printf("DRAM:  Capacity 4 GiB (includes reported below)\n");
+		}
+	} else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
+		init_pll(&ddr3a_333);
+		if (cpu_revision() > 0) {
+			if (cpu_revision() > 1) {
+				/* PG 2.0 */
+				/* Reset DDR3A PHY after PLL enabled */
+				ddr3_reset_ddrphy();
+				ddr3phy_1333_2g.zq0cr1 |= 0x10000;
+				ddr3phy_1333_2g.zq1cr1 |= 0x10000;
+				ddr3phy_1333_2g.zq2cr1 |= 0x10000;
+				ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
+						 &ddr3phy_1333_2g);
+			} else {
+				/* PG 1.1 */
+				ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
+						 &ddr3phy_1333_2g);
+			}
+			ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
+					  &ddr3_1333_2g);
+		} else {
+			ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g);
+			ddr3_1333_2g.sdcfg |= 0x1000;
+			ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
+					  &ddr3_1333_2g);
+		}
+	} else {
+		printf("Unknown SO-DIMM. Cannot configure DDR3\n");
+		while (1)
+			;
+	}
+}