diff options
Diffstat (limited to 'board/logicpd/zoom1/zoom1.c')
| -rw-r--r-- | board/logicpd/zoom1/zoom1.c | 148 |
1 files changed, 0 insertions, 148 deletions
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c deleted file mode 100644 index 53dc9762f8..0000000000 --- a/board/logicpd/zoom1/zoom1.c +++ /dev/null @@ -1,148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2004-2008 - * Texas Instruments, <www.ti.com> - * - * Author : - * Nishanth Menon <nm@ti.com> - * - * Derived from Beagle Board and 3430 SDP code by - * Sunil Kumar <sunilsaini05@gmail.com> - * Shashi Ranjan <shashiranjanmca05@gmail.com> - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - */ -#include <common.h> -#include <dm.h> -#include <env.h> -#include <init.h> -#include <net.h> -#include <ns16550.h> -#include <netdev.h> -#include <twl4030.h> -#include <linux/mtd/omap_gpmc.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/mach-types.h> -#include "zoom1.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* - * gpmc_cfg is initialized by gpmc_init and we use it here. - * GPMC definitions for Ethenet Controller LAN9211 - */ -static const u32 gpmc_lab_enet[] = { - ZOOM1_ENET_GPMC_CONF1, - ZOOM1_ENET_GPMC_CONF2, - ZOOM1_ENET_GPMC_CONF3, - ZOOM1_ENET_GPMC_CONF4, - ZOOM1_ENET_GPMC_CONF5, - ZOOM1_ENET_GPMC_CONF6, - /*CONF7- computed as params */ -}; - -static const struct ns16550_platdata zoom1_serial = { - .base = OMAP34XX_UART3, - .reg_shift = 2, - .clock = V_NS16550_CLK, - .fcr = UART_FCR_DEFVAL, -}; - -U_BOOT_DEVICE(zoom1_uart) = { - "ns16550_serial", - &zoom1_serial -}; - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* CS1 is Ethernet LAN9211 */ - enable_gpmc_cs_config(gpmc_lab_enet, &gpmc_cfg->cs[1], - DEBUG_BASE, GPMC_SIZE_16M); - /* board id for Linux */ - gd->bd->bi_arch_number = MACH_TYPE_OMAP_LDP; - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -/* - * Routine: misc_init_r - * Description: Configure zoom board specific configurations - */ -int misc_init_r(void) -{ - twl4030_power_init(); - twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); - omap_die_id_display(); - - /* - * Board Reset - * The board is reset by holding the red button on the - * top right front face for eight seconds. - */ - twl4030_power_reset_init(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - /* platform specific muxes */ - MUX_ZOOM1_MDK(); -} - -#ifdef CONFIG_MMC -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} - -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); -} -#endif - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; - -#ifdef CONFIG_SMC911X -#define STR_ENV_ETHADDR "ethaddr" - - struct eth_device *dev; - uchar eth_addr[6]; - - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); - if (!eth_env_get_enetaddr(STR_ENV_ETHADDR, eth_addr)) { - dev = eth_get_dev_by_index(0); - if (dev) { - eth_env_set_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); - } else { - printf("zoom1: Couldn't get eth device\n"); - rc = -1; - } - } -#endif - - return rc; -} -#endif |