summaryrefslogtreecommitdiffstats
path: root/board/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/ls1012afrdm/ls1012afrdm.c116
-rw-r--r--board/freescale/ls1012aqds/ls1012aqds.c116
-rw-r--r--board/freescale/ls1012ardb/ls1012ardb.c116
3 files changed, 0 insertions, 348 deletions
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index 5a2b1f48fe..d644e9423b 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -17,20 +17,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
-{
- int timeout = 1000;
-
- out_be32(ptr, value);
-
- while (in_be32(ptr) & bits) {
- udelay(100);
- timeout--;
- }
- if (timeout <= 0)
- puts("Error: wait for clear timeout.\n");
-}
-
int checkboard(void)
{
puts("Board: LS1012AFRDM ");
@@ -38,108 +24,6 @@ int checkboard(void)
return 0;
}
-void mmdc_init(void)
-{
- struct mmdc_p_regs *mmdc =
- (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
-
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- /* configure timing parms */
- out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING);
- out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
- out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
- out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
-
- /* other parms */
- out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC);
- out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
- out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
- out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
-
- /* out of reset delays */
- out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
-
- /* physical parms */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
- out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
-
- /* Enable MMDC */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
-
- /* dram init sequence: update MRs */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
- CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
-
- /* dram init sequence: ZQCL */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
- set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
- CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
- FORCE_ZQ_AUTO_CALIBRATION);
-
- /* Calibrations now: wr lvl */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
- CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
- set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
-
- mdelay(1);
-
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- mdelay(1);
-
- /* Calibrations now: Read DQS gating calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
- set_wait_for_bits_clear(&mmdc->mpdgctrl0,
- AUTO_RD_DQS_GATING_CALIBRATION_EN,
- AUTO_RD_DQS_GATING_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* Calibrations now: Read calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- set_wait_for_bits_clear(&mmdc->mprddlhwctl,
- AUTO_RD_CALIBRATION_EN,
- AUTO_RD_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* PD, SR */
- out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
- out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
-
- /* refresh scheme */
- set_wait_for_bits_clear(&mmdc->mdref,
- CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
- START_REFRESH);
-
- /* disable CON_REQ */
- out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
-}
-
int dram_init(void)
{
mmdc_init();
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 874c122725..188b6bc979 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -27,20 +27,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
-{
- int timeout = 1000;
-
- out_be32(ptr, value);
-
- while (in_be32(ptr) & bits) {
- udelay(100);
- timeout--;
- }
- if (timeout <= 0)
- puts("Error: wait for clear timeout.\n");
-}
-
int checkboard(void)
{
char buf[64];
@@ -66,108 +52,6 @@ int checkboard(void)
return 0;
}
-void mmdc_init(void)
-{
- struct mmdc_p_regs *mmdc =
- (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
-
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- /* configure timing parms */
- out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING);
- out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
- out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
- out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
-
- /* other parms */
- out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC);
- out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
- out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
- out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
-
- /* out of reset delays */
- out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
-
- /* physical parms */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
- out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
-
- /* Enable MMDC */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
-
- /* dram init sequence: update MRs */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
- CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
-
- /* dram init sequence: ZQCL */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
- set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
- CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
- FORCE_ZQ_AUTO_CALIBRATION);
-
- /* Calibrations now: wr lvl */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
- CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
- set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
-
- mdelay(1);
-
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- mdelay(1);
-
- /* Calibrations now: Read DQS gating calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
- set_wait_for_bits_clear(&mmdc->mpdgctrl0,
- AUTO_RD_DQS_GATING_CALIBRATION_EN,
- AUTO_RD_DQS_GATING_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* Calibrations now: Read calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- set_wait_for_bits_clear(&mmdc->mprddlhwctl,
- AUTO_RD_CALIBRATION_EN,
- AUTO_RD_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* PD, SR */
- out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
- out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
-
- /* refresh scheme */
- set_wait_for_bits_clear(&mmdc->mdref,
- CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
- START_REFRESH);
-
- /* disable CON_REQ */
- out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
-}
-
int dram_init(void)
{
mmdc_init();
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index 6598ab37ee..50f91876ca 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -21,20 +21,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
-{
- int timeout = 1000;
-
- out_be32(ptr, value);
-
- while (in_be32(ptr) & bits) {
- udelay(100);
- timeout--;
- }
- if (timeout <= 0)
- puts("Error: wait for clear timeout.\n");
-}
-
int checkboard(void)
{
u8 in1;
@@ -70,108 +56,6 @@ int checkboard(void)
return 0;
}
-void mmdc_init(void)
-{
- struct mmdc_p_regs *mmdc =
- (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
-
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- /* configure timing parms */
- out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING);
- out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
- out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
- out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
-
- /* other parms */
- out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC);
- out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
- out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
- out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
-
- /* out of reset delays */
- out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
-
- /* physical parms */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
- out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
-
- /* Enable MMDC */
- out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
-
- /* dram init sequence: update MRs */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
- CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
-
- /* dram init sequence: ZQCL */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
- set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
- CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
- FORCE_ZQ_AUTO_CALIBRATION);
-
- /* Calibrations now: wr lvl */
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
- CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
- set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
-
- mdelay(1);
-
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
- out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
-
- mdelay(1);
-
- /* Calibrations now: Read DQS gating calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
- set_wait_for_bits_clear(&mmdc->mpdgctrl0,
- AUTO_RD_DQS_GATING_CALIBRATION_EN,
- AUTO_RD_DQS_GATING_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* Calibrations now: Read calibration */
- out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
- CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
- out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
- CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
- out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
- set_wait_for_bits_clear(&mmdc->mprddlhwctl,
- AUTO_RD_CALIBRATION_EN,
- AUTO_RD_CALIBRATION_EN);
-
- out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
- CMD_BANK_ADDR_3));
-
- /* PD, SR */
- out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
- out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
-
- /* refresh scheme */
- set_wait_for_bits_clear(&mmdc->mdref,
- CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
- START_REFRESH);
-
- /* disable CON_REQ */
- out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
-}
-
int dram_init(void)
{
mmdc_init();
generated by cgit (git 2.34.1) at 2024-11-19 00:15:51 +0000