diff options
Diffstat (limited to 'board/freescale/t102xrdb/README')
| -rw-r--r-- | board/freescale/t102xrdb/README | 18 |
1 files changed, 11 insertions, 7 deletions
diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README index 922450e3c7..7d3794a6d6 100644 --- a/board/freescale/t102xrdb/README +++ b/board/freescale/t102xrdb/README @@ -70,6 +70,7 @@ Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit +Package: 23x23 19x19 T1024RDB board Overview @@ -192,7 +193,7 @@ Software configurations and board settings on T1024RDB: set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot on T1023RDB: - set SW1[1:8] = '00010110', SW2[1] = '0', SW3[4] = '0' for NOR boot + set SW1[1:8] = '00010111', SW2[1] = '1', SW3[4] = '0' for NOR boot Switching between default bank0 and alternate bank4 on NOR flash To change boot source to vbank4: @@ -200,7 +201,7 @@ Software configurations and board settings via software: run command 'cpld reset altbank' in u-boot. via DIP-switch: set SW3[5:7] = '100' on T1023RDB: - via software: run command 'gpio vbank4' in u-boot. + via software: run command 'switch bank4' in u-boot. via DIP-switch: set SW3[5:7] = '100' To change boot source to vbank0: @@ -208,7 +209,7 @@ Software configurations and board settings via software: run command 'cpld reset' in u-boot. via DIP-Switch: set SW3[5:7] = '000' on T1023RDB: - via software: run command 'gpio vbank0' in u-boot. + via software: run command 'switch bank0' in u-boot. via DIP-switch: set SW3[5:7] = '000' 2. NAND Boot: @@ -219,7 +220,7 @@ Software configurations and board settings => tftp 1000000 u-boot-with-spl-pbl.bin => nand erase 0 $filesize => nand write 1000000 0 $filesize - set SW1[1:8] = '10001000', SW2[1] = '1', SW3[4] = '1' for NAND boot + set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot 3. SPI Boot: a. build PBL image for SPI boot @@ -241,11 +242,14 @@ Software configurations and board settings $ make b. program u-boot-with-spl-pbl.bin to SD/MMC card => tftp 1000000 u-boot-with-spl-pbl.bin - => mmc write 1000000 8 0x800 + => mmc write 1000000 8 0x7f0 => tftp 1000000 fsl_fman_ucode_t1024_xx.bin => mmc write 1000000 0x820 80 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot + SW3[3] = '1' for SD card(or 'switch sd' by software) + SW3[3] = '0' for eMMC (or 'switch emmc' by software) + 2-stage NAND/SPI/SD boot loader ------------------------------- @@ -292,7 +296,7 @@ Start End Definition Size 0x160000 0x17FFFF FMAN Ucode 128KB -SD Card memory Map on T1024RDB +SD Card memory Map on T102xRDB ---------------------------------------------------- Block #blocks Definition Size 0x008 2048 u-boot img 1MB @@ -313,5 +317,5 @@ Start End Definition Size 0xa00000 0x3FFFFFF rootfs 54MB -For more details, please refer to T1024RDB Reference Manual +For more details, please refer to T1024RDB/T1023RDB User Guide and Freescale QorIQ SDK Infocenter document. |