1 files changed, 0 insertions, 118 deletions
diff --git a/board/ccv/xpress/spl.c b/board/ccv/xpress/spl.c
deleted file mode 100644
index 38bda8d184..0000000000
--- a/board/ccv/xpress/spl.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SPL specific code for CCV xPress
- *
- * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <spl.h>
-#include <asm/io.h>
-#include <asm/arch/mx6-ddr.h>
-#include <asm/arch/crm_regs.h>
-
-/* Configuration for IM IME1G16D3EEBG-15EI, 64M x 16 -> 128MiB */
-
-static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
-	.grp_addds = 0x00000030,
-	.grp_ddrmode_ctl = 0x00020000,
-	.grp_b0ds = 0x00000030,
-	.grp_ctlds = 0x00000030,
-	.grp_b1ds = 0x00000030,
-	.grp_ddrpke = 0x00000000,
-	.grp_ddrmode = 0x00020000,
-	.grp_ddr_type = 0x000c0000,
-};
-
-static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
-	.dram_dqm0 = 0x00000030,
-	.dram_dqm1 = 0x00000030,
-	.dram_ras = 0x00000030,
-	.dram_cas = 0x00000030,
-	.dram_odt0 = 0x00000030,
-	.dram_odt1 = 0x00000030,
-	.dram_sdba2 = 0x00000000,
-	.dram_sdclk_0 = 0x00000008,
-	.dram_sdqs0 = 0x00000038,
-	.dram_sdqs1 = 0x00000030,
-	.dram_reset = 0x00000030,
-};
-
-static struct mx6_mmdc_calibration mx6_mmcd_calib = {
-	.p0_mpwldectrl0 = 0x00000000,
-	.p0_mpdgctrl0 = 0x4164015C,
-	.p0_mprddlctl = 0x40404446,
-	.p0_mpwrdlctl = 0x40405A52,
-};
-
-struct mx6_ddr_sysinfo ddr_sysinfo = {
-	.dsize = 0,
-	.cs_density = 20,
-	.ncs = 1,
-	.cs1_mirror = 0,
-	.rtt_wr = 2,
-	.rtt_nom = 1,		/* RTT_Nom = RZQ/2 */
-	.walat = 1,		/* Write additional latency */
-	.ralat = 5,		/* Read additional latency */
-	.mif3_mode = 3,		/* Command prediction working mode */
-	.bi_on = 1,		/* Bank interleaving enabled */
-	.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
-	.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
-	.ddr_type = DDR_TYPE_DDR3,
-	.refsel = 1,		/* Refresh cycles at 32KHz */
-	.refr = 7,		/* 8 refresh commands per refresh cycle */
-};
-
-static struct mx6_ddr3_cfg mem_ddr = {
-	.mem_speed = 800,
-	.density = 4,
-	.width = 16,
-	.banks = 8,
-	.rowaddr = 13,
-	.coladdr = 10,
-	.pagesz = 2,
-	.trcd = 1375,
-	.trcmin = 4875,
-	.trasmin = 3500,
-};
-
-static void ccgr_init(void)
-{
-	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
-	writel(0xFFFFFFFF, &ccm->CCGR0);
-	writel(0xFFFFFFFF, &ccm->CCGR1);
-	writel(0xFFFFFFFF, &ccm->CCGR2);
-	writel(0xFFFFFFFF, &ccm->CCGR3);
-	writel(0xFFFFFFFF, &ccm->CCGR4);
-	writel(0xFFFFFFFF, &ccm->CCGR5);
-	writel(0xFFFFFFFF, &ccm->CCGR6);
-	writel(0xFFFFFFFF, &ccm->CCGR7);
-}
-
-static void spl_dram_init(void)
-{
-	mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
-	mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
-}
-
-void board_init_f(ulong dummy)
-{
-	/* Setup AIPS and disable watchdog */
-	arch_cpu_init();
-
-	ccgr_init();
-
-	/* Setup iomux and i2c */
-	board_early_init_f();
-
-	/* Setup GP timer */
-	timer_init();
-
-	/* UART clocks enabled and gd valid - init serial console */
-	preloader_console_init();
-
-	/* DDR initialization */
-	spl_dram_init();
-}