1 files changed, 0 insertions, 125 deletions
diff --git a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c b/board/broadcom/bcm23550_w1d/bcm23550_w1d.c
deleted file mode 100644
index 90685c072a..0000000000
--- a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-#include <common.h>
-#include <init.h>
-#include <log.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <env.h>
-#include <mmc.h>
-#include <asm/kona-common/kona_sdhci.h>
-#include <asm/kona-common/clk.h>
-#include <asm/arch/sysmap.h>
-
-#include <usb.h>
-#include <usb/dwc2_udc.h>
-#include <g_dnl.h>
-
-#define SECWATCHDOG_SDOGCR_OFFSET	0x00000000
-#define SECWATCHDOG_SDOGCR_EN_SHIFT	27
-#define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT	26
-#define SECWATCHDOG_SDOGCR_CLKS_SHIFT	20
-#define SECWATCHDOG_SDOGCR_LD_SHIFT	0
-
-#ifndef CONFIG_USB_SERIALNO
-#define CONFIG_USB_SERIALNO "1234567890"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * board_init - early hardware init
- */
-int board_init(void)
-{
-	printf("Relocation Offset is: %08lx\n", gd->reloc_off);
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	clk_init();
-
-	return 0;
-}
-
-/*
- * misc_init_r - miscellaneous platform dependent initializations
- */
-int misc_init_r(void)
-{
-	return 0;
-}
-
-/*
- * dram_init - sets uboots idea of sdram size
- */
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-				    CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-/* This is called after dram_init() so use get_ram_size result */
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-
-	return 0;
-}
-
-#ifdef CONFIG_MMC_SDHCI_KONA
-/*
- * mmc_init - Initializes mmc
- */
-int board_mmc_init(struct bd_info *bis)
-{
-	int ret = 0;
-
-	/* Register eMMC - SDIO2 */
-	ret = kona_sdhci_init(1, 400000, 0);
-	if (ret)
-		return ret;
-
-	/* Register SD Card - SDIO4 kona_mmc_init assumes 0 based index */
-	ret = kona_sdhci_init(3, 400000, 0);
-	return ret;
-}
-#endif
-
-#ifdef CONFIG_USB_GADGET
-static struct dwc2_plat_otg_data bcm_otg_data = {
-	.regs_otg	= HSOTG_BASE_ADDR
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-	debug("%s: performing dwc2_udc_probe\n", __func__);
-	return dwc2_udc_probe(&bcm_otg_data);
-}
-
-int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
-{
-	debug("%s\n", __func__);
-	if (!env_get("serial#"))
-		g_dnl_set_serialnumber(CONFIG_USB_SERIALNO);
-	return 0;
-}
-
-int g_dnl_get_board_bcd_device_number(int gcnum)
-{
-	debug("%s\n", __func__);
-	return 1;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	debug("%s\n", __func__);
-	return 0;
-}
-#endif