diff options
Diffstat (limited to 'board/amlogic/w400/README.khadas-vim3')
| -rw-r--r-- | board/amlogic/w400/README.khadas-vim3 | 131 |
1 files changed, 0 insertions, 131 deletions
diff --git a/board/amlogic/w400/README.khadas-vim3 b/board/amlogic/w400/README.khadas-vim3 deleted file mode 100644 index 399bf49295..0000000000 --- a/board/amlogic/w400/README.khadas-vim3 +++ /dev/null @@ -1,131 +0,0 @@ -U-Boot for Khadas VIM3 -====================== - -Khadas VIM3 is a single board computer manufactured by Shenzhen Wesion -Technology Co., Ltd. with the following specifications: - - - Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC - - 4GB LPDDR4 SDRAM - - Gigabit Ethernet - - HDMI 2.1 display - - 40-pin GPIO header - - 1 x USB 3.0 Host, 1 x USB 2.0 Host - - eMMC, microSD - - M.2 - - Infrared receiver - -Schematics are available on the manufacturer website. - -Currently the U-Boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim3_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - - > DIR=vim3-u-boot - > git clone --depth 1 \ - https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ - $DIR - - > cd vim3-u-boot - > make kvim3_defconfig - > make - > export UBOOTDIR=$PWD - - Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --ddrfw9 fip/lpddr3_1d.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 |