diff options
Diffstat (limited to 'board/amcc')
-rw-r--r-- | board/amcc/bamboo/init.S | 26 | ||||
-rw-r--r-- | board/amcc/canyonlands/init.S | 48 | ||||
-rw-r--r-- | board/amcc/ebony/init.S | 12 | ||||
-rw-r--r-- | board/amcc/katmai/init.S | 52 | ||||
-rw-r--r-- | board/amcc/luan/init.S | 20 | ||||
-rw-r--r-- | board/amcc/ocotea/init.S | 12 | ||||
-rw-r--r-- | board/amcc/redwood/init.S | 26 | ||||
-rw-r--r-- | board/amcc/sequoia/init.S | 34 | ||||
-rw-r--r-- | board/amcc/taishan/init.S | 61 | ||||
-rw-r--r-- | board/amcc/yosemite/init.S | 69 | ||||
-rw-r--r-- | board/amcc/yucca/init.S | 58 |
11 files changed, 162 insertions, 256 deletions
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S index 7439c805c2..6925921785 100644 --- a/board/amcc/bamboo/init.S +++ b/board/amcc/bamboo/init.S @@ -48,29 +48,29 @@ tlbtab: * speed up boot process. It is patched after relocation to enable SA_I */ #ifndef CONFIG_NAND_SPL - tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G) + tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G) #else - tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G) - tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_RWX | SA_G) + tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG) #endif /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) + tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G) /* PCI base & peripherals */ - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I) - tlbentry(CONFIG_SYS_NAND_ADDR, SZ_4K, CONFIG_SYS_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I) + tlbentry(CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_RWX | SA_W|SA_I) + tlbentry(CONFIG_SYS_NAND_ADDR, SZ_4K, CONFIG_SYS_NAND_ADDR, 0, AC_RWX | SA_W|SA_I) /* PCI */ - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_RW | SA_IG) /* USB 2.0 Device */ - tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_RW | SA_IG) tlbtab_end @@ -81,7 +81,7 @@ tlbtab: */ #define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) #define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 0) -#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I) +#define TLB02 TLB2(AC_RWX | SA_IG) .globl reconfig_tlb0 reconfig_tlb0: diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S index 993bec30ea..64d5d42293 100644 --- a/board/amcc/canyonlands/init.S +++ b/board/amcc/canyonlands/init.S @@ -47,11 +47,11 @@ tlbtab: * enable SA_I */ #ifndef CONFIG_NAND_SPL - tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */ + tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_RWX | SA_G) /* TLB 0 */ #else - tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G) - tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 4, AC_RWX | SA_G) + tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG) + tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_RWX | SA_IG) #endif /* @@ -62,51 +62,51 @@ tlbtab: #ifdef CONFIG_SYS_INIT_RAM_DCACHE /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) + tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G) #endif - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG) /* PCIe UTL register */ - tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_RW | SA_IG) #if !defined(CONFIG_ARCHES) /* TLB-entry for NAND */ - tlbentry(CONFIG_SYS_NAND_ADDR, SZ_16M, CONFIG_SYS_NAND_ADDR, 4, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CONFIG_SYS_NAND_ADDR, SZ_16M, CONFIG_SYS_NAND_ADDR, 4, AC_RWX | SA_IG) /* TLB-entry for CPLD */ - tlbentry(CONFIG_SYS_BCSR_BASE, SZ_1K, CONFIG_SYS_BCSR_BASE, 4, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_BCSR_BASE, SZ_1K, CONFIG_SYS_BCSR_BASE, 4, AC_RW | SA_IG) #else /* TLB-entry for FPGA */ - tlbentry(CONFIG_SYS_FPGA_BASE, SZ_16M, CONFIG_SYS_FPGA_BASE, 4, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_FPGA_BASE, SZ_16M, CONFIG_SYS_FPGA_BASE, 4, AC_RW | SA_IG) #endif /* TLB-entry for OCM */ - tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) + tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4, AC_RWX | SA_I) /* TLB-entry for Local Configuration registers => peripherals */ - tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_RWX | SA_IG) /* AHB: Internal USB Peripherals (USB, SATA) */ - tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_RWX | SA_IG) #if defined(CONFIG_RAPIDIO) /* TLB-entries for RapidIO (SRIO) */ tlbentry(CONFIG_SYS_SRGPL0_REG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_REG_BAR, - 0xD, AC_R|AC_W|SA_G|SA_I) + 0xD, AC_RW | SA_IG) tlbentry(CONFIG_SYS_SRGPL0_CFG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_CFG_BAR, - 0xD, AC_R|AC_W|SA_G|SA_I) + 0xD, AC_RW | SA_IG) tlbentry(CONFIG_SYS_SRGPL0_MNT_BAR, SZ_16M, CONFIG_SYS_SRGPL0_MNT_BAR, - 0xD, AC_R|AC_W|SA_G|SA_I) + 0xD, AC_RW | SA_IG) tlbentry(CONFIG_SYS_I2ODMA_BASE, SZ_1K, 0x00100000, - 0x4, AC_R|AC_W|SA_G|SA_I) + 0x4, AC_RW | SA_IG) #endif tlbtab_end @@ -118,7 +118,7 @@ tlbtab: */ #define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) #define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1) -#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I) +#define TLB02 TLB2(AC_RWX | SA_IG) .globl reconfig_tlb0 reconfig_tlb0: diff --git a/board/amcc/ebony/init.S b/board/amcc/ebony/init.S index 153fa811c4..c91176367e 100644 --- a/board/amcc/ebony/init.S +++ b/board/amcc/ebony/init.S @@ -41,7 +41,7 @@ tlbtab: tlbtab_start - tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) /* * TLB entries for SDRAM are not needed on this platform. @@ -49,9 +49,9 @@ tlbtab: * routine. */ - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X) - tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X) - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX) + tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG) tlbtab_end diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S index 90598f63bc..59ccf2b6aa 100644 --- a/board/amcc/katmai/init.S +++ b/board/amcc/katmai/init.S @@ -51,7 +51,7 @@ tlbtabA: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) + tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) /* * TLB entries for SDRAM are not needed on this platform. @@ -59,20 +59,20 @@ tlbtabA: * routine. */ - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_RW | SA_IG) tlbtab_end /************************************************************************** @@ -91,7 +91,7 @@ tlbtabB: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) + tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) /* * TLB entries for SDRAM are not needed on this platform. @@ -99,20 +99,20 @@ tlbtabB: * routine. */ - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) + tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K, CONFIG_SYS_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K, CONFIG_SYS_ACE_BASE, 4,AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_RW | SA_IG) tlbtab_end diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S index 513b0fc560..06428d25ca 100644 --- a/board/amcc/luan/init.S +++ b/board/amcc/luan/init.S @@ -48,13 +48,13 @@ tlbtab: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry(0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G) + tlbentry(0xfff00000, SZ_1M, 0xfff00000, 1, AC_RWX | SA_G) - tlbentry(0xffc00000, SZ_1M, 0xffc00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry(CONFIG_SYS_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(0xffc00000, SZ_1M, 0xffc00000, 1, AC_RWX | SA_IG) + tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_RWX | SA_IG) + tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_RWX | SA_IG) + tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_RWX | SA_IG) + tlbentry(CONFIG_SYS_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_RW | SA_IG) /* * TLB entries for SDRAM are not needed on this platform. @@ -63,12 +63,12 @@ tlbtab: */ /* internal ram (l2 cache) */ - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I) + tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX | SA_I) /* peripherals at f0000000 */ - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, CONFIG_SYS_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, CONFIG_SYS_PERIPHERAL_BASE, 1, AC_RW | SA_IG) /* PCI */ - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 9, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_RW | SA_IG) tlbtab_end diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S index e7c75dfac5..2ef11ccb4b 100644 --- a/board/amcc/ocotea/init.S +++ b/board/amcc/ocotea/init.S @@ -41,7 +41,7 @@ tlbtab: tlbtab_start - tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) /* * TLB entries for SDRAM are not needed on this platform. @@ -49,9 +49,9 @@ tlbtab: * routine. */ - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X) - tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X) - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX) + tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG) tlbtab_end diff --git a/board/amcc/redwood/init.S b/board/amcc/redwood/init.S index 4da586918d..fb10520b82 100644 --- a/board/amcc/redwood/init.S +++ b/board/amcc/redwood/init.S @@ -45,7 +45,7 @@ tlbtab: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) + tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) /* * TLB entries for SDRAM are not needed on this platform. @@ -54,24 +54,24 @@ tlbtab: */ /* Although 512 KB, map 256k at a time */ - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) - tlbentry(CONFIG_SYS_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I) + tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) + tlbentry(CONFIG_SYS_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_RWX | SA_I) - tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG) /* * Peripheral base */ - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_RW | SA_IG) tlbtab_end diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S index f090070b4d..7139aaee4d 100644 --- a/board/amcc/sequoia/init.S +++ b/board/amcc/sequoia/init.S @@ -41,7 +41,7 @@ tlbtab: tlbtab_start /* vxWorks needs this as first entry for the Machine Check interrupt */ - tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( 0x40000000, SZ_256M, 0, 0, AC_RWX | SA_IG ) /* * The RAM-boot version skips the SDRAM TLB (identified by EPN=0). This @@ -51,49 +51,49 @@ tlbtab: #ifndef CONFIG_SYS_RAMBOOT /* TLB-entry for DDR SDRAM (Up to 2GB) */ #ifdef CONFIG_4xx_DCACHE - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G) + tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_G) #else - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG ) #endif #endif /* CONFIG_SYS_RAMBOOT */ /* TLB-entry for EBC */ - tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_RWX | SA_IG ) /* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ #ifndef CONFIG_NAND_SPL - tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G ) #else - tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_RWX | SA_G ) #endif #ifdef CONFIG_SYS_INIT_RAM_DCACHE /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G ) #endif /* TLB-entry for PCI Memory */ - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG ) + tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG ) + tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG ) + tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG ) /* TLB-entry for NAND */ - tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_RWX | SA_IG ) /* TLB-entry for Internal Registers & OCM */ - tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I ) + tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_RWX | SA_I ) /*TLB-entry PCI registers*/ - tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RWX | SA_IG ) /* TLB-entry for peripherals */ - tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG) /* TLB-entry PCI IO Space - from sr@denx.de */ - tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RWX | SA_IG) tlbtab_end @@ -104,7 +104,7 @@ tlbtab: */ #define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) #define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1) -#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I) +#define TLB02 TLB2(AC_RWX | SA_IG) .globl reconfig_tlb0 reconfig_tlb0: diff --git a/board/amcc/taishan/init.S b/board/amcc/taishan/init.S index 748ec0ab52..ac4e95df05 100644 --- a/board/amcc/taishan/init.S +++ b/board/amcc/taishan/init.S @@ -22,56 +22,9 @@ */ #include <ppc_asm.tmpl> +#include <asm/mmu.h> #include <config.h> -/* General */ -#define TLB_VALID 0x00000200 -#define _256M 0x10000000 - -/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 - -/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ - -/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ - -/* Some handy macros */ - -#define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) - -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; - -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - -#define tlbentry(epn,sz,rpn,erpn,attr)\ - .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) - /************************************************************************** * TLB TABLE * @@ -88,10 +41,10 @@ tlbtab: tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) - tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X ) - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I ) + tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) + tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) + tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX ) + tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG ) + tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG ) + tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG ) tlbtab_end diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S index f9382365ca..ed3741c54a 100644 --- a/board/amcc/yosemite/init.S +++ b/board/amcc/yosemite/init.S @@ -20,56 +20,9 @@ */ #include <ppc_asm.tmpl> +#include <asm/mmu.h> #include <config.h> -/* General */ -#define TLB_VALID 0x00000200 - -/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 - -/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ - -/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ - -/* Some handy macros */ - -#define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) - -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; - -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - -#define tlbentry(epn,sz,rpn,erpn,attr)\ - .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) - - /************************************************************************** * TLB TABLE * @@ -91,22 +44,22 @@ tlbtab: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) + tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G/*|SA_I*/) /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G ) - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I ) + tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG ) + tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_RW | SA_IG ) + tlbentry( CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_RWX | SA_W|SA_I ) /* PCI */ - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_RW | SA_IG ) + tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_RW | SA_IG ) + tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_RW | SA_IG ) + tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_RW | SA_IG ) /* USB 2.0 Device */ - tlbentry( CONFIG_SYS_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CONFIG_SYS_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_RW | SA_IG ) tlbtab_end diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S index f51035ff68..b2ac3ca4a3 100644 --- a/board/amcc/yucca/init.S +++ b/board/amcc/yucca/init.S @@ -51,7 +51,7 @@ tlbtabA: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) + tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) /* * TLB entries for SDRAM are not needed on this platform. @@ -59,23 +59,23 @@ tlbtabA: * routine. */ - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) - tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I) + tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) + tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_RW | SA_I) - tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG) + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_RW | SA_IG) tlbtab_end /************************************************************************** @@ -94,7 +94,7 @@ tlbtabB: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) + tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_RWX | SA_G) /* * TLB entries for SDRAM are not needed on this platform. @@ -102,20 +102,20 @@ tlbtabB: * routine. */ - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) - tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I) + tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_RWX | SA_I) + tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_RW | SA_I) - tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I) - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_RWX | SA_IG) + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) - tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_RW | SA_IG) tlbtab_end |