8 files changed, 0 insertions, 445 deletions
diff --git a/board/amcc/acadia/Kconfig b/board/amcc/acadia/Kconfig
deleted file mode 100644
index 033deaf7d6..0000000000
--- a/board/amcc/acadia/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_ACADIA
-
-config SYS_BOARD
-	default "acadia"
-
-config SYS_VENDOR
-	default "amcc"
-
-config SYS_CONFIG_NAME
-	default "acadia"
-
-endif
diff --git a/board/amcc/acadia/MAINTAINERS b/board/amcc/acadia/MAINTAINERS
deleted file mode 100644
index c16961fde8..0000000000
--- a/board/amcc/acadia/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ACADIA BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/amcc/acadia/
-F:	include/configs/acadia.h
-F:	configs/acadia_defconfig
diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile
deleted file mode 100644
index 035f407275..0000000000
--- a/board/amcc/acadia/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= acadia.o cmd_acadia.o memory.o pll.o
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
deleted file mode 100644
index 2eb18df5e7..0000000000
--- a/board/amcc/acadia/acadia.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-extern void board_pll_init_f(void);
-
-static void acadia_gpio_init(void)
-{
-	/*
-	 * GPIO0 setup (select GPIO or alternate function)
-	 */
-	out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
-	out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH);	/* output select */
-	out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
-	out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H);	/* input select */
-	out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
-	out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH);	/* three-state select */
-	out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);  /* enable output driver for outputs */
-
-	/*
-	 * Ultra (405EZ) was nice enough to add another GPIO controller
-	 */
-	out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH);	/* output select */
-	out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
-	out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H);	/* input select */
-	out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
-	out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH);	/* three-state select */
-	out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
-	out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR);  /* enable output driver for outputs */
-}
-
-int board_early_init_f(void)
-{
-	unsigned int reg;
-
-	/* don't reinit PLL when booting via I2C bootstrap option */
-	mfsdr(SDR0_PINSTP, reg);
-	if (reg != 0xf0000000)
-		board_pll_init_f();
-
-	acadia_gpio_init();
-
-	/* Configure 405EZ for NAND usage */
-	mtsdr(SDR0_NAND0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
-	mfsdr(SDR0_ULTRA0, reg);
-	reg &= ~SDR_ULTRA0_CSN_MASK;
-	reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
-		SDR_ULTRA0_NDGPIOBP |
-		SDR_ULTRA0_EBCRDYEN |
-		SDR_ULTRA0_NFSRSTEN;
-	mtsdr(SDR0_ULTRA0, reg);
-
-	/* USB Host core needs this bit set */
-	mfsdr(SDR0_ULTRA1, reg);
-	mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE);
-
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000010);
-	mtdcr(UIC0PR, 0xFE7FFFF0);	/* set int polarities */
-	mtdcr(UIC0TR, 0x00000010);	/* set int trigger levels */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	return 0;
-}
-
-int misc_init_f(void)
-{
-	/* Set EPLD to take PHY out of reset */
-	out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
-	udelay(100000);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	u8 rev;
-
-	rev = in8(CONFIG_SYS_CPLD_BASE + 0);
-	printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
deleted file mode 100644
index e9df61b7b3..0000000000
--- a/board/amcc/acadia/cmd_acadia.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-
-static u8 boot_267_nor[] = {
-	0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00,
-	0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-static u8 boot_267_nand[] = {
-	0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00,
-	0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	u8 chip;
-	u8 *buf;
-	int cpu_freq;
-
-	if (argc < 3)
-		return cmd_usage(cmdtp);
-
-	cpu_freq = simple_strtol(argv[1], NULL, 10);
-	if (cpu_freq != 267) {
-		printf("Unsupported cpu-frequency - only 267 supported\n");
-		return 1;
-	}
-
-	/* use 0x50 as I2C EEPROM address for now */
-	chip = 0x50;
-
-	if ((strcmp(argv[2], "nor") != 0) &&
-	    (strcmp(argv[2], "nand") != 0)) {
-		printf("Unsupported boot-device - only nor|nand support\n");
-		return 1;
-	}
-
-	if (strcmp(argv[2], "nand") == 0) {
-		switch (cpu_freq) {
-		case 267:
-			buf = boot_267_nand;
-			break;
-		default:
-			break;
-		}
-	} else {
-		switch (cpu_freq) {
-		case 267:
-			buf = boot_267_nor;
-			break;
-		default:
-			break;
-		}
-	}
-
-	if (i2c_write(chip, 0, 1, buf, 16) != 0)
-		printf("Error writing to EEPROM at address 0x%x\n", chip);
-	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-	if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
-		printf("Error2 writing to EEPROM at address 0x%x\n", chip);
-
-	printf("Done\n");
-	printf("Please power-cycle the board for the changes to take effect\n");
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	bootstrap,	3,	0,	do_bootstrap,
-	"program the I2C bootstrap EEPROM",
-	"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM"
-);
diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk
deleted file mode 100644
index 5350ec04db..0000000000
--- a/board/amcc/acadia/config.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2007-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# AMCC 405EZ Reference Platform (Acadia) board
-#
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
deleted file mode 100644
index 36500da6f4..0000000000
--- a/board/amcc/acadia/memory.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void board_pll_init_f(void);
-
-static void cram_bcr_write(u32 wr_val)
-{
-	wr_val <<= 2;
-
-	/* set CRAM_CRE to 1 */
-	gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 1);
-
-	/* Write BCR to CRAM on CS1 */
-	out32(wr_val + 0x00200000, 0);
-	debug("CRAM VAL: %08x for CS1 ", wr_val + 0x00200000);
-
-	/* Write BCR to CRAM on CS2 */
-	out32(wr_val + 0x02200000, 0);
-	debug("CRAM VAL: %08x for CS2\n", wr_val + 0x02200000);
-
-	sync();
-	eieio();
-
-	/* set CRAM_CRE back to 0 (normal operation) */
-	gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 0);
-
-	return;
-}
-
-int dram_init(void)
-{
-	int i;
-	u32 val;
-
-	/* 1. EBC need to program READY, CLK, ADV for ASync mode */
-	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CONFIG_SYS_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
-
-	/* 2. EBC in Async mode */
-	mtebc(PB1AP, 0x078F1EC0);
-	mtebc(PB2AP, 0x078F1EC0);
-	mtebc(PB1CR, 0x000BC000);
-	mtebc(PB2CR, 0x020BC000);
-
-	/* 3. Set CRAM in Sync mode */
-	cram_bcr_write(0x7012);		/* CRAM burst setting */
-
-	/* 4. EBC in Sync mode */
-	mtebc(PB1AP, 0x9C0201C0);
-	mtebc(PB2AP, 0x9C0201C0);
-
-	/* Set GPIO pins back to alternate function */
-	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
-	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
-
-	/* Config EBC to use RDY */
-	mfsdr(SDR0_ULTRA0, val);
-	mtsdr(SDR0_ULTRA0, val | SDR_ULTRA0_EBCRDYEN);
-
-	/* Wait a short while, since for NAND booting this is too fast */
-	for (i=0; i<200000; i++)
-		;
-
-	gd->ram_size = CONFIG_SYS_MBYTES_RAM << 20;
-
-	return 0;
-}
diff --git a/board/amcc/acadia/pll.c b/board/amcc/acadia/pll.c
deleted file mode 100644
index d868582ba9..0000000000
--- a/board/amcc/acadia/pll.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/ppc405.h>
-
-/* test-only: move into cpu directory!!! */
-
-#if defined(PLLMR0_200_133_66)
-void board_pll_init_f(void)
-{
-	/*
-	 * set PLL clocks based on input sysclk is 33M
-	 *
-	 * ----------------------------------
-	 * | CLK   | FREQ (MHz) | DIV RATIO |
-	 * ----------------------------------
-	 * | CPU   |  200.0     |   4 (0x02)|
-	 * | PLB   |  133.3     |   6 (0x06)|
-	 * | OPB   |   66.6     |  12 (0x0C)|
-	 * | EBC   |   66.6     |  12 (0x0C)|
-	 * | SPI   |   66.6     |  12 (0x0C)|
-	 * | UART0 |   10.0     |  40 (0x28)|
-	 * | UART1 |   10.0     |  40 (0x28)|
-	 * | DAC   |    2.0     | 200 (0xC8)|
-	 * | ADC   |    2.0     | 200 (0xC8)|
-	 * | PWM   |  100.0     |   4 (0x04)|
-	 * | EMAC  |   25.0     |  16 (0x10)|
-	 * -----------------------------------
-	 */
-
-	/* Initialize PLL */
-	mtcpr(CPR0_PLLC, 0x0000033c);
-	mtcpr(CPR0_PLLD, 0x0c010200);
-	mtcpr(CPR0_PRIMAD, 0x04060c0c);
-	mtcpr(CPR0_PERD0, 0x000c0000);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(CPR0_CLKUPD, 0x40000000);
-}
-
-#elif defined(PLLMR0_266_160_80)
-
-void board_pll_init_f(void)
-{
-	/*
-	 * set PLL clocks based on input sysclk is 33M
-	 *
-	 * ----------------------------------
-	 * | CLK   | FREQ (MHz) | DIV RATIO |
-	 * ----------------------------------
-	 * | CPU   |  266.64    |   3       |
-	 * | PLB   |  159.98    |   5 (0x05)|
-	 * | OPB   |   79.99    |  10 (0x0A)|
-	 * | EBC   |   79.99    |  10 (0x0A)|
-	 * | SPI   |   79.99    |  10 (0x0A)|
-	 * | UART0 |   28.57    |   7 (0x07)|
-	 * | UART1 |   28.57    |   7 (0x07)|
-	 * | DAC   |   28.57    |   7 (0xA7)|
-	 * | ADC   |    4       |  50 (0x32)|
-	 * | PWM   |   28.57    |   7 (0x07)|
-	 * | EMAC  |    4       |  50 (0x32)|
-	 * -----------------------------------
-	 */
-
-	/* Initialize PLL */
-	mtcpr(CPR0_PLLC, 0x20000238);
-	mtcpr(CPR0_PLLD, 0x03010400);
-	mtcpr(CPR0_PRIMAD, 0x03050a0a);
-	mtcpr(CPR0_PERC0, 0x00000000);
-	mtcpr(CPR0_PERD0, 0x070a0707);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(CPR0_PERD1, 0x07323200);
-	mtcpr(CPR0_CLKUP, 0x40000000);
-}
-
-#elif defined(PLLMR0_333_166_83)
-
-void board_pll_init_f(void)
-{
-	/*
-	 * set PLL clocks based on input sysclk is 33M
-	 *
-	 * ----------------------------------
-	 * | CLK   | FREQ (MHz) | DIV RATIO |
-	 * ----------------------------------
-	 * | CPU   |  333.33    |   2       |
-	 * | PLB   |  166.66    |   4 (0x04)|
-	 * | OPB   |   83.33    |   8 (0x08)|
-	 * | EBC   |   83.33    |   8 (0x08)|
-	 * | SPI   |   83.33    |   8 (0x08)|
-	 * | UART0 |   16.66    |   5 (0x05)|
-	 * | UART1 |   16.66    |   5 (0x05)|
-	 * | DAC   |   ????     | 166 (0xA6)|
-	 * | ADC   |   ????     | 166 (0xA6)|
-	 * | PWM   |   41.66    |   3 (0x03)|
-	 * | EMAC  |   ????     |   3 (0x03)|
-	 * -----------------------------------
-	 */
-
-	/* Initialize PLL */
-	mtcpr(CPR0_PLLC, 0x0000033C);
-	mtcpr(CPR0_PLLD, 0x0a010000);
-	mtcpr(CPR0_PRIMAD, 0x02040808);
-	mtcpr(CPR0_PERD0, 0x02080505);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(CPR0_PERD1, 0xA6A60300);
-	mtcpr(CPR0_CLKUP, 0x40000000);
-}
-
-#elif defined(PLLMR0_100_100_12)
-
-void board_pll_init_f(void)
-{
-	/*
-	 * set PLL clocks based on input sysclk is 33M
-	 *
-	 * ----------------------
-	 * | CLK   | FREQ (MHz) |
-	 * ----------------------
-	 * | CPU   |  100.00    |
-	 * | PLB   |  100.00    |
-	 * | OPB   |   12.00    |
-	 * | EBC   |   49.00    |
-	 * ----------------------
-	 */
-
-	/* Initialize PLL */
-	mtcpr(CPR0_PLLC, 0x000003BC);
-	mtcpr(CPR0_PLLD, 0x06060600);
-	mtcpr(CPR0_PRIMAD, 0x02020004);
-	mtcpr(CPR0_PERD0, 0x04002828);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(CPR0_PERD1, 0xC8C81600);
-	mtcpr(CPR0_CLKUP, 0x40000000);
-}
-#endif				/* CPU_<speed>_405EZ */