diff options
Diffstat (limited to 'arch/ppc/cpu/mpc85xx/serial_scc.c')
| -rw-r--r-- | arch/ppc/cpu/mpc85xx/serial_scc.c | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc85xx/serial_scc.c b/arch/ppc/cpu/mpc85xx/serial_scc.c new file mode 100644 index 0000000000..2dab2124fc --- /dev/null +++ b/arch/ppc/cpu/mpc85xx/serial_scc.c @@ -0,0 +1,268 @@ +/* + * (C) Copyright 2003 Motorola Inc. + * Xianghua Xiao (X.Xiao@motorola.com) + * Modified based on 8260 for 8560. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00. + */ + +/* + * Minimal serial functions needed to use one of the SCC ports + * as serial console interface. + */ + +#include <common.h> +#include <asm/cpm_85xx.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CONS_ON_SCC) + +#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */ + +#define SCC_INDEX 0 +#define PROFF_SCC PROFF_SCC1 +#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\ + CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK) +#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1) +#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE +#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK + +#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */ + +#define SCC_INDEX 1 +#define PROFF_SCC PROFF_SCC2 +#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\ + CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK) +#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2) +#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE +#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK + +#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */ + +#define SCC_INDEX 2 +#define PROFF_SCC PROFF_SCC3 +#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\ + CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK) +#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3) +#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE +#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK + +#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */ + +#define SCC_INDEX 3 +#define PROFF_SCC PROFF_SCC4 +#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\ + CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK) +#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4) +#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE +#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK + +#else + +#error "console not correctly defined" + +#endif + +int serial_init (void) +{ + volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR; + volatile ccsr_cpm_scc_t *sp; + volatile scc_uart_t *up; + volatile cbd_t *tbdf, *rbdf; + volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp); + uint dpaddr; + + /* initialize pointers to SCC */ + + sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]); + up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]); + + /* Disable transmitter/receiver. + */ + sp->gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + /* put the SCC channel into NMSI (non multiplexd serial interface) + * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15). + */ + cpm->im_cpm_mux.cmxscr = \ + (cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE; + + /* Set up the baud rate generator. + */ + serial_setbrg (); + + /* Allocate space for two buffer descriptors in the DP ram. + * damm: allocating space after the two buffers for rx/tx data + */ + + dpaddr = m8560_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16); + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]); + rbdf->cbd_bufaddr = (uint) (rbdf+2); + rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP; + tbdf = rbdf + 1; + tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1; + tbdf->cbd_sc = BD_SC_WRAP; + + /* Set up the uart parameters in the parameter ram. + */ + up->scc_genscc.scc_rbase = dpaddr; + up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t); + up->scc_genscc.scc_rfcr = CPMFCR_EB; + up->scc_genscc.scc_tfcr = CPMFCR_EB; + up->scc_genscc.scc_mrblr = 1; + up->scc_maxidl = 0; + up->scc_brkcr = 1; + up->scc_parec = 0; + up->scc_frmec = 0; + up->scc_nosec = 0; + up->scc_brkec = 0; + up->scc_uaddr1 = 0; + up->scc_uaddr2 = 0; + up->scc_toseq = 0; + up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000; + up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000; + up->scc_rccm = 0xc0ff; + + /* Mask all interrupts and remove anything pending. + */ + sp->sccm = 0; + sp->scce = 0xffff; + + /* Set 8 bit FIFO, 16 bit oversampling and UART mode. + */ + sp->gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */ + sp->gsmrl = \ + SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART; + + /* Set CTS no flow control, 1 stop bit, 8 bit character length, + * normal async UART mode, no parity + */ + sp->psmr = SCU_PSMR_CL; + + /* execute the "Init Rx and Tx params" CP command. + */ + + while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + cp->cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK, + 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; + + while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */ + ; + + /* Enable transmitter/receiver. + */ + sp->gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT; + + return (0); +} + +void +serial_setbrg (void) +{ +#if defined(CONFIG_CONS_USE_EXTC) + m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate, + CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL); +#else + m8560_cpm_setbrg(SCC_INDEX, gd->baudrate); +#endif +} + +void +serial_putc(const char c) +{ + volatile scc_uart_t *up; + volatile cbd_t *tbdf; + volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR; + + if (c == '\n') + serial_putc ('\r'); + + up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]); + tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]); + + /* Wait for last character to go. + */ + while (tbdf->cbd_sc & BD_SC_READY) + ; + + /* Load the character into the transmit buffer. + */ + *(volatile char *)tbdf->cbd_bufaddr = c; + tbdf->cbd_datlen = 1; + tbdf->cbd_sc |= BD_SC_READY; +} + +void +serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +int +serial_getc(void) +{ + volatile cbd_t *rbdf; + volatile scc_uart_t *up; + volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR; + unsigned char c; + + up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]); + rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]); + + /* Wait for character to show up. + */ + while (rbdf->cbd_sc & BD_SC_EMPTY) + ; + + /* Grab the char and clear the buffer again. + */ + c = *(volatile unsigned char *)rbdf->cbd_bufaddr; + rbdf->cbd_sc |= BD_SC_EMPTY; + + return (c); +} + +int +serial_tstc() +{ + volatile cbd_t *rbdf; + volatile scc_uart_t *up; + volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR; + + up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]); + rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]); + + return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0); +} + +#endif /* CONFIG_CONS_ON_SCC */ |