diff options
Diffstat (limited to 'arch/arm/dts/hi3798cv200-poplar.dts')
| -rw-r--r-- | arch/arm/dts/hi3798cv200-poplar.dts | 75 |
1 files changed, 64 insertions, 11 deletions
diff --git a/arch/arm/dts/hi3798cv200-poplar.dts b/arch/arm/dts/hi3798cv200-poplar.dts index 964326eae8..606ba55c7d 100644 --- a/arch/arm/dts/hi3798cv200-poplar.dts +++ b/arch/arm/dts/hi3798cv200-poplar.dts @@ -1,14 +1,17 @@ -// SPDX-License-Identifier: GPL-2.0 /* * DTS File for HiSilicon Poplar Development Board * * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + * + * Released under the GPLv2 only. + * SPDX-License-Identifier: GPL-2.0 */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include "hi3798cv200.dtsi" +#include "poplar-pinctrl.dtsi" / { model = "HiSilicon Poplar Development Board"; @@ -28,6 +31,13 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + leds { compatible = "gpio-leds"; @@ -59,6 +69,33 @@ default-state = "off"; }; }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "3V3_PCIE0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 7 0>; + enable-active-high; + }; +}; + +&ehci { + status = "okay"; +}; + +&emmc { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins_1 &emmc_pins_2 + &emmc_pins_3 &emmc_pins_4>; + fifo-depth = <256>; + clock-frequency = <200000000>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + bus-width = <8>; + status = "okay"; }; &gmac1 { @@ -76,17 +113,17 @@ &gpio1 { status = "okay"; - gpio-line-names = "LS-GPIO-E", "", + gpio-line-names = "GPIO-E", "", "", "", - "", "LS-GPIO-F", - "", "LS-GPIO-J"; + "", "GPIO-F", + "", "GPIO-J"; }; &gpio2 { status = "okay"; - gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", - "LS-GPIO-L", "LS-GPIO-G", - "LS-GPIO-K", "", + gpio-line-names = "GPIO-H", "GPIO-I", + "GPIO-L", "GPIO-G", + "GPIO-K", "", "", ""; }; @@ -94,15 +131,15 @@ status = "okay"; gpio-line-names = "", "", "", "", - "LS-GPIO-C", "", - "", "LS-GPIO-B"; + "GPIO-C", "", + "", "GPIO-B"; }; &gpio4 { status = "okay"; gpio-line-names = "", "", "", "", - "", "LS-GPIO-D", + "", "GPIO-D", "", ""; }; @@ -110,7 +147,7 @@ status = "okay"; gpio-line-names = "", "USER-LED-1", "USER-LED-2", "", - "", "LS-GPIO-A", + "", "GPIO-A", "", ""; }; @@ -144,6 +181,22 @@ status = "okay"; }; +&ohci { + status = "okay"; +}; + +&pcie { + reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + vpcie-supply = <®_pcie>; + status = "okay"; +}; + +&sd0 { + bus-width = <4>; + cap-sd-highspeed; + status = "okay"; +}; + &spi0 { status = "okay"; label = "LS-SPI0"; |