diff options
Diffstat (limited to 'arch/arm/cpu/armv7m')
-rw-r--r-- | arch/arm/cpu/armv7m/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/armv7m/stm32f1/Makefile | 14 | ||||
-rw-r--r-- | arch/arm/cpu/armv7m/stm32f1/clock.c | 196 | ||||
-rw-r--r-- | arch/arm/cpu/armv7m/stm32f1/flash.c | 180 | ||||
-rw-r--r-- | arch/arm/cpu/armv7m/stm32f1/soc.c | 36 | ||||
-rw-r--r-- | arch/arm/cpu/armv7m/stm32f1/timer.c | 121 |
6 files changed, 548 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7m/Makefile b/arch/arm/cpu/armv7m/Makefile index b662e03428..93a19566f5 100644 --- a/arch/arm/cpu/armv7m/Makefile +++ b/arch/arm/cpu/armv7m/Makefile @@ -8,4 +8,5 @@ extra-y := start.o obj-y += cpu.o +obj-$(CONFIG_STM32F1) += stm32f1/ obj-$(CONFIG_STM32F4) += stm32f4/ diff --git a/arch/arm/cpu/armv7m/stm32f1/Makefile b/arch/arm/cpu/armv7m/stm32f1/Makefile new file mode 100644 index 0000000000..4faf4359d5 --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f1/Makefile @@ -0,0 +1,14 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2015 +# Kamil Lulko, <rev13@wp.pl> +# +# Copyright 2015 ATS Advanced Telematics Systems GmbH +# Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += soc.o clock.o timer.o flash.o diff --git a/arch/arm/cpu/armv7m/stm32f1/clock.c b/arch/arm/cpu/armv7m/stm32f1/clock.c new file mode 100644 index 0000000000..acad116a52 --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f1/clock.c @@ -0,0 +1,196 @@ +/* + * (C) Copyright 2015 + * Kamil Lulko, <rev13@wp.pl> + * + * Copyright 2015 ATS Advanced Telematics Systems GmbH + * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> + * + * (C) Copyright 2014 + * STMicroelectronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/stm32.h> + +#define RCC_CR_HSION (1 << 0) +#define RCC_CR_HSEON (1 << 16) +#define RCC_CR_HSERDY (1 << 17) +#define RCC_CR_HSEBYP (1 << 18) +#define RCC_CR_CSSON (1 << 19) +#define RCC_CR_PLLON (1 << 24) +#define RCC_CR_PLLRDY (1 << 25) + +#define RCC_CFGR_PLLMUL_MASK 0x3C0000 +#define RCC_CFGR_PLLMUL_SHIFT 18 +#define RCC_CFGR_PLLSRC_HSE (1 << 16) + +#define RCC_CFGR_AHB_PSC_MASK 0xF0 +#define RCC_CFGR_APB1_PSC_MASK 0x700 +#define RCC_CFGR_APB2_PSC_MASK 0x3800 +#define RCC_CFGR_SW0 (1 << 0) +#define RCC_CFGR_SW1 (1 << 1) +#define RCC_CFGR_SW_MASK 0x3 +#define RCC_CFGR_SW_HSI 0 +#define RCC_CFGR_SW_HSE RCC_CFGR_SW0 +#define RCC_CFGR_SW_PLL RCC_CFGR_SW1 +#define RCC_CFGR_SWS0 (1 << 2) +#define RCC_CFGR_SWS1 (1 << 3) +#define RCC_CFGR_SWS_MASK 0xC +#define RCC_CFGR_SWS_HSI 0 +#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0 +#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1 +#define RCC_CFGR_HPRE_SHIFT 4 +#define RCC_CFGR_PPRE1_SHIFT 8 +#define RCC_CFGR_PPRE2_SHIFT 11 + +#define RCC_APB1ENR_PWREN (1 << 28) + +#define PWR_CR_VOS0 (1 << 14) +#define PWR_CR_VOS1 (1 << 15) +#define PWR_CR_VOS_MASK 0xC000 +#define PWR_CR_VOS_SCALE_MODE_1 (PWR_CR_VOS0 | PWR_CR_VOS1) +#define PWR_CR_VOS_SCALE_MODE_2 (PWR_CR_VOS1) +#define PWR_CR_VOS_SCALE_MODE_3 (PWR_CR_VOS0) + +#define FLASH_ACR_WS(n) n +#define FLASH_ACR_PRFTEN (1 << 8) +#define FLASH_ACR_ICEN (1 << 9) +#define FLASH_ACR_DCEN (1 << 10) + +struct psc { + u8 ahb_psc; + u8 apb1_psc; + u8 apb2_psc; +}; + +#define AHB_PSC_1 0 +#define AHB_PSC_2 0x8 +#define AHB_PSC_4 0x9 +#define AHB_PSC_8 0xA +#define AHB_PSC_16 0xB +#define AHB_PSC_64 0xC +#define AHB_PSC_128 0xD +#define AHB_PSC_256 0xE +#define AHB_PSC_512 0xF + +#define APB_PSC_1 0 +#define APB_PSC_2 0x4 +#define APB_PSC_4 0x5 +#define APB_PSC_8 0x6 +#define APB_PSC_16 0x7 + +#if !defined(CONFIG_STM32_HSE_HZ) +#error "CONFIG_STM32_HSE_HZ not defined!" +#else +#if (CONFIG_STM32_HSE_HZ == 8000000) +#define RCC_CFGR_PLLMUL_CFG 0x7 +struct psc psc_hse = { + .ahb_psc = AHB_PSC_1, + .apb1_psc = APB_PSC_2, + .apb2_psc = APB_PSC_1 +}; +#else +#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists" +#endif +#endif + +int configure_clocks(void) +{ + /* Reset RCC configuration */ + setbits_le32(&STM32_RCC->cr, RCC_CR_HSION); + writel(0, &STM32_RCC->cfgr); /* Reset CFGR */ + clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON + | RCC_CR_PLLON)); + clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP); + writel(0, &STM32_RCC->cir); /* Disable all interrupts */ + + /* Configure for HSE+PLL operation */ + setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON); + while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY)) + ; + + /* Enable high performance mode, System frequency up to 168 MHz */ + setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN); + writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr); + + setbits_le32(&STM32_RCC->cfgr, + RCC_CFGR_PLLMUL_CFG << RCC_CFGR_PLLMUL_SHIFT); + setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_PLLSRC_HSE); + setbits_le32(&STM32_RCC->cfgr, (( + psc_hse.ahb_psc << RCC_CFGR_HPRE_SHIFT) + | (psc_hse.apb1_psc << RCC_CFGR_PPRE1_SHIFT) + | (psc_hse.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); + + setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON); + + while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY)) + ; + + /* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */ + writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN + | FLASH_ACR_DCEN, &STM32_FLASH->acr); + + clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1)); + setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL); + + while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) != + RCC_CFGR_SWS_PLL) + ; + + return 0; +} + +unsigned long clock_get(enum clock clck) +{ + u32 sysclk = 0; + u32 shift = 0; + /* PLL table lookups for clock computation */ + u8 pll_mul_table[16] = { + 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16 + }; + /* Prescaler table lookups for clock computation */ + u8 ahb_psc_table[16] = { + 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9 + }; + u8 apb_psc_table[8] = { + 0, 0, 0, 0, 1, 2, 3, 4 + }; + + if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) == + RCC_CFGR_SWS_PLL) { + u16 pll; + pll = ((readl(&STM32_RCC->cfgr) & RCC_CFGR_PLLMUL_MASK) + >> RCC_CFGR_PLLMUL_SHIFT); + sysclk = CONFIG_STM32_HSE_HZ * pll_mul_table[pll]; + } + + switch (clck) { + case CLOCK_CORE: + return sysclk; + break; + case CLOCK_AHB: + shift = ahb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK) + >> RCC_CFGR_HPRE_SHIFT)]; + return sysclk >>= shift; + break; + case CLOCK_APB1: + shift = apb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK) + >> RCC_CFGR_PPRE1_SHIFT)]; + return sysclk >>= shift; + break; + case CLOCK_APB2: + shift = apb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK) + >> RCC_CFGR_PPRE2_SHIFT)]; + return sysclk >>= shift; + break; + default: + return 0; + break; + } +} diff --git a/arch/arm/cpu/armv7m/stm32f1/flash.c b/arch/arm/cpu/armv7m/stm32f1/flash.c new file mode 100644 index 0000000000..bb88f236af --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f1/flash.c @@ -0,0 +1,180 @@ +/* + * (C) Copyright 2015 + * Kamil Lulko, <rev13@wp.pl> + * + * Copyright 2015 ATS Advanced Telematics Systems GmbH + * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/stm32.h> + +#define STM32_FLASH_KEY1 0x45670123 +#define STM32_FLASH_KEY2 0xcdef89ab + +#define STM32_NUM_BANKS 2 +#define STM32_MAX_BANK 0x200 + +flash_info_t flash_info[STM32_NUM_BANKS]; +static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS]; + +static void stm32f1_flash_lock(u8 bank, u8 lock) +{ + if (lock) { + setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK); + } else { + writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr); + writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr); + } +} + +/* Only XL devices are supported (2 KiB sector size) */ +unsigned long flash_init(void) +{ + u8 i, banks; + u16 j, size; + + /* Set up accessors for XL devices with wonky register layout */ + flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr; + flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2; + + /* + * Get total flash size (in KiB) and configure number of banks + * present and sector count per bank. + */ + size = readw(&STM32_DES->flash_size); + if (size <= STM32_MAX_BANK) { + banks = 1; + flash_info[0].sector_count = size >> 1; + } else if (size > STM32_MAX_BANK) { + banks = 2; + flash_info[0].sector_count = STM32_MAX_BANK >> 1; + flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1; + } + + /* Configure start/size for all sectors */ + for (i = 0; i < banks; i++) { + flash_info[i].flash_id = FLASH_STM32F1; + flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19); + flash_info[i].size = 2048; + for (j = 1; (j < flash_info[i].sector_count); j++) { + flash_info[i].start[j] = flash_info[i].start[j - 1] + + 2048; + flash_info[i].size += 2048; + } + } + + return size << 10; +} + +void flash_print_info(flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Missing or unknown FLASH type\n"); + return; + } else if (info->flash_id == FLASH_STM32F1) { + printf("STM32F1 Embedded Flash\n"); + } + + printf(" Size: %ld MB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf("\n"); + return; +} + +int flash_erase(flash_info_t *info, int first, int last) +{ + u8 bank = 0xff; + int i; + + for (i = 0; i < STM32_NUM_BANKS; i++) { + if (info == &flash_info[i]) { + bank = i; + break; + } + } + if (bank == 0xff) + return -1; + + stm32f1_flash_lock(bank, 0); + + for (i = first; i <= last; i++) { + while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) + ; + + setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER); + + writel(info->start[i], &flash_bank[bank]->ar); + + setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT); + + while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) + ; + } + + clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER); + + stm32f1_flash_lock(bank, 1); + + return 0; +} + +int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong i; + u8 bank = 0xff; + + if (addr & 1) { + printf("Flash address must be half word aligned\n"); + return -1; + } + + if (cnt & 1) { + printf("Flash length must be half word aligned\n"); + return -1; + } + + for (i = 0; i < 2; i++) { + if (info == &flash_info[i]) { + bank = i; + break; + } + } + + if (bank == 0xff) + return -1; + + while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) + ; + + stm32f1_flash_lock(bank, 0); + + setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG); + + /* STM32F1 requires half word writes */ + for (i = 0; i < cnt >> 1; i++) { + *(u16 *)(addr + i * 2) = ((u16 *)src)[i]; + while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) + ; + } + + clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG); + + stm32f1_flash_lock(bank, 1); + + return 0; +} diff --git a/arch/arm/cpu/armv7m/stm32f1/soc.c b/arch/arm/cpu/armv7m/stm32f1/soc.c new file mode 100644 index 0000000000..8275ad7798 --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f1/soc.c @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2015 + * Kamil Lulko, <rev13@wp.pl> + * + * Copyright 2015 ATS Advanced Telematics Systems GmbH + * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/armv7m.h> +#include <asm/arch/stm32.h> + +u32 get_cpu_rev(void) +{ + return 0; +} + +int arch_cpu_init(void) +{ + configure_clocks(); + + /* + * Configure the memory protection unit (MPU) to allow full access to + * the whole 4GB address space. + */ + writel(0, &V7M_MPU->rnr); + writel(0, &V7M_MPU->rbar); + writel((V7M_MPU_RASR_AP_RW_RW | V7M_MPU_RASR_SIZE_4GB + | V7M_MPU_RASR_EN), &V7M_MPU->rasr); + writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl); + + return 0; +} diff --git a/arch/arm/cpu/armv7m/stm32f1/timer.c b/arch/arm/cpu/armv7m/stm32f1/timer.c new file mode 100644 index 0000000000..c6292b5f3c --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f1/timer.c @@ -0,0 +1,121 @@ +/* + * (C) Copyright 2015 + * Kamil Lulko, <rev13@wp.pl> + * + * Copyright 2015 ATS Advanced Telematics Systems GmbH + * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/armv7m.h> +#include <asm/arch/stm32.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define STM32_TIM2_BASE (STM32_APB1PERIPH_BASE + 0x0000) + +#define RCC_APB1ENR_TIM2EN (1 << 0) + +struct stm32_tim2_5 { + u32 cr1; + u32 cr2; + u32 smcr; + u32 dier; + u32 sr; + u32 egr; + u32 ccmr1; + u32 ccmr2; + u32 ccer; + u32 cnt; + u32 psc; + u32 arr; + u32 reserved1; + u32 ccr1; + u32 ccr2; + u32 ccr3; + u32 ccr4; + u32 reserved2; + u32 dcr; + u32 dmar; + u32 or; +}; + +#define TIM_CR1_CEN (1 << 0) + +#define TIM_EGR_UG (1 << 0) + +int timer_init(void) +{ + struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; + + setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN); + + if (clock_get(CLOCK_AHB) == clock_get(CLOCK_APB1)) + writel((clock_get(CLOCK_APB1) / CONFIG_SYS_HZ_CLOCK) - 1, + &tim->psc); + else + writel(((clock_get(CLOCK_APB1) * 2) / CONFIG_SYS_HZ_CLOCK) - 1, + &tim->psc); + + writel(0xFFFFFFFF, &tim->arr); + writel(TIM_CR1_CEN, &tim->cr1); + setbits_le32(&tim->egr, TIM_EGR_UG); + + gd->arch.tbl = 0; + gd->arch.tbu = 0; + gd->arch.lastinc = 0; + + return 0; +} + +ulong get_timer(ulong base) +{ + return (get_ticks() / (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)) - base; +} + +unsigned long long get_ticks(void) +{ + struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; + u32 now; + + now = readl(&tim->cnt); + + if (now >= gd->arch.lastinc) + gd->arch.tbl += (now - gd->arch.lastinc); + else + gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; + + gd->arch.lastinc = now; + + return gd->arch.tbl; +} + +void reset_timer(void) +{ + struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; + + gd->arch.lastinc = readl(&tim->cnt); + gd->arch.tbl = 0; +} + +/* delay x useconds */ +void __udelay(ulong usec) +{ + unsigned long long start; + + start = get_ticks(); /* get current timestamp */ + while ((get_ticks() - start) < usec) + ; /* loop till time has passed */ +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ_CLOCK; +} |