diff options
Diffstat (limited to 'arch/arm/cpu/armv7/socfpga/scan_manager.c')
| -rw-r--r-- | arch/arm/cpu/armv7/socfpga/scan_manager.c | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/socfpga/scan_manager.c b/arch/arm/cpu/armv7/socfpga/scan_manager.c new file mode 100644 index 0000000000..a820b1b1bf --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/scan_manager.c @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/freeze_controller.h> +#include <asm/arch/scan_manager.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct socfpga_scan_manager *scan_manager_base = + (void *)(SOCFPGA_SCANMGR_ADDRESS); +static const struct socfpga_freeze_controller *freeze_controller_base = + (void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS); + +/* + * Function to check IO scan chain engine status and wait if the engine is + * is active. Poll the IO scan chain engine till maximum iteration reached. + */ +static inline uint32_t scan_chain_engine_is_idle(uint32_t max_iter) +{ + uint32_t scanmgr_status; + + scanmgr_status = readl(&scan_manager_base->stat); + + /* Poll the engine until the scan engine is inactive */ + while (SCANMGR_STAT_ACTIVE_GET(scanmgr_status) || + (SCANMGR_STAT_WFIFOCNT_GET(scanmgr_status) > 0)) { + max_iter--; + if (max_iter > 0) + scanmgr_status = readl(&scan_manager_base->stat); + else + return 0; + } + return 1; +} + +/* Program HPS IO Scan Chain */ +uint32_t scan_mgr_io_scan_chain_prg( + uint32_t io_scan_chain_id, + uint32_t io_scan_chain_len_in_bits, + const uint32_t *iocsr_scan_chain) +{ + uint16_t tdi_tdo_header; + uint32_t io_program_iter; + uint32_t io_scan_chain_data_residual; + uint32_t residual; + uint32_t i; + uint32_t index = 0; + + /* + * De-assert reinit if the IO scan chain is intended for HIO. In + * this, its the chain 3. + */ + if (io_scan_chain_id == 3) + clrbits_le32(&freeze_controller_base->hioctrl, + SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK); + + /* + * Check if the scan chain engine is inactive and the + * WFIFO is empty before enabling the IO scan chain + */ + if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY)) + return 1; + + /* + * Enable IO Scan chain based on scan chain id + * Note: only one chain can be enabled at a time + */ + setbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id); + + /* + * Calculate number of iteration needed for full 128-bit (4 x32-bits) + * bits shifting. Each TDI_TDO packet can shift in maximum 128-bits + */ + io_program_iter = io_scan_chain_len_in_bits >> + IO_SCAN_CHAIN_128BIT_SHIFT; + io_scan_chain_data_residual = io_scan_chain_len_in_bits & + IO_SCAN_CHAIN_128BIT_MASK; + + /* Construct TDI_TDO packet for 128-bit IO scan chain (2 bytes) */ + tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE | + (TDI_TDO_MAX_PAYLOAD << TDI_TDO_HEADER_SECOND_BYTE_SHIFT); + + /* Program IO scan chain in 128-bit iteration */ + for (i = 0; i < io_program_iter; i++) { + /* write TDI_TDO packet header to scan manager */ + writel(tdi_tdo_header, &scan_manager_base->fifo_double_byte); + + /* calculate array index. Multiply by 4 as write 4 x 32bits */ + index = i * 4; + + /* write 4 successive 32-bit IO scan chain data into WFIFO */ + writel(iocsr_scan_chain[index], + &scan_manager_base->fifo_quad_byte); + writel(iocsr_scan_chain[index + 1], + &scan_manager_base->fifo_quad_byte); + writel(iocsr_scan_chain[index + 2], + &scan_manager_base->fifo_quad_byte); + writel(iocsr_scan_chain[index + 3], + &scan_manager_base->fifo_quad_byte); + + /* + * Check if the scan chain engine has completed the + * IO scan chain data shifting + */ + if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY)) + goto error; + } + + /* Calculate array index for final TDI_TDO packet */ + index = io_program_iter * 4; + + /* Final TDI_TDO packet if any */ + if (io_scan_chain_data_residual) { + /* + * Calculate number of quad bytes FIFO write + * needed for the final TDI_TDO packet + */ + io_program_iter = io_scan_chain_data_residual >> + IO_SCAN_CHAIN_32BIT_SHIFT; + + /* + * Construct TDI_TDO packet for remaining IO + * scan chain (2 bytes) + */ + tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE | + ((io_scan_chain_data_residual - 1) << + TDI_TDO_HEADER_SECOND_BYTE_SHIFT); + + /* + * Program the last part of IO scan chain write TDI_TDO packet + * header (2 bytes) to scan manager + */ + writel(tdi_tdo_header, &scan_manager_base->fifo_double_byte); + + for (i = 0; i < io_program_iter; i++) { + /* + * write remaining scan chain data into scan + * manager WFIFO with 4 bytes write + */ + writel(iocsr_scan_chain[index + i], + &scan_manager_base->fifo_quad_byte); + } + + index += io_program_iter; + residual = io_scan_chain_data_residual & + IO_SCAN_CHAIN_32BIT_MASK; + + if (IO_SCAN_CHAIN_PAYLOAD_24BIT < residual) { + /* + * write the last 4B scan chain data + * into scan manager WFIFO + */ + writel(iocsr_scan_chain[index], + &scan_manager_base->fifo_quad_byte); + } else { + /* + * write the remaining 1 - 3 bytes scan chain + * data into scan manager WFIFO byte by byte + * to prevent JTAG engine shifting unused data + * from the FIFO and mistaken the data as a + * valid command (even though unused bits are + * set to 0, but just to prevent hardware + * glitch) + */ + for (i = 0; i < residual; i += 8) { + writel(((iocsr_scan_chain[index] >> i) + & IO_SCAN_CHAIN_BYTE_MASK), + &scan_manager_base->fifo_single_byte); + } + } + + /* + * Check if the scan chain engine has completed the + * IO scan chain data shifting + */ + if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY)) + goto error; + } + + /* Disable IO Scan chain when configuration done*/ + clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id); + return 0; + +error: + /* Disable IO Scan chain when error detected */ + clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id); + return 1; +} + +int scan_mgr_configure_iocsr(void) +{ + int status = 0; + + /* configure the IOCSR through scan chain */ + status |= scan_mgr_io_scan_chain_prg(0, + CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH, iocsr_scan_chain0_table); + status |= scan_mgr_io_scan_chain_prg(1, + CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH, iocsr_scan_chain1_table); + status |= scan_mgr_io_scan_chain_prg(2, + CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH, iocsr_scan_chain2_table); + status |= scan_mgr_io_scan_chain_prg(3, + CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH, iocsr_scan_chain3_table); + return status; +} |