diff options
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 17 | ||||
| -rw-r--r-- | board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 10 | ||||
| -rw-r--r-- | include/configs/at91sam9m10g45ek.h | 15 |
3 files changed, 41 insertions, 1 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c index 7d7725c4b8..0e6c0da1bd 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c @@ -165,3 +165,20 @@ void at91_macb_hw_init(void) #endif } #endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */ + + /* Enable clock */ + writel(1 << ATMEL_ID_MCI0, &pmc->pcer); +} +#endif diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index b7e2efd2fc..57881164c5 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -16,6 +16,7 @@ #include <asm/arch/clk.h> #include <lcd.h> #include <atmel_lcdc.h> +#include <atmel_mci.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif @@ -217,6 +218,15 @@ void lcd_show_board_info(void) #endif /* CONFIG_LCD_INFO */ #endif +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bis) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_MCI0); +} +#endif + int board_early_init_f(void) { at91_seriald_hw_init(); diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 5d5fbe5853..61f7bc2079 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -116,6 +116,20 @@ #endif +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* Ethernet */ #define CONFIG_MACB #define CONFIG_RMII @@ -127,7 +141,6 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 -#define CONFIG_DOS_PARTITION #define CONFIG_USB_STORAGE #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ |