diff options
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/Kconfig | 36 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 8 | ||||
| -rw-r--r-- | drivers/phy/phy-uclass.c | 139 | ||||
| -rw-r--r-- | include/dm/uclass-id.h | 1 | ||||
| -rw-r--r-- | include/generic-phy.h | 224 |
7 files changed, 411 insertions, 0 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index a096dad2b2..a5f24d72da 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -54,6 +54,8 @@ source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" +source "drivers/phy/Kconfig" + source "drivers/phy/marvell/Kconfig" source "drivers/pinctrl/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 4a4b2377c5..691642023d 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_$(SPL_TPL_)DM) += core/ obj-$(CONFIG_$(SPL_)CLK) += clk/ obj-$(CONFIG_$(SPL_)LED) += led/ +obj-$(CONFIG_$(SPL_)PHY) += phy/ obj-$(CONFIG_$(SPL_)PINCTRL) += pinctrl/ obj-$(CONFIG_$(SPL_)RAM) += ram/ diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig new file mode 100644 index 0000000000..0a7492063c --- /dev/null +++ b/drivers/phy/Kconfig @@ -0,0 +1,36 @@ + +menu "PHY Subsystem" + +config PHY + bool "PHY Core" + depends on DM + help + PHY support. + + This framework is designed to provide a generic interface for PHY + devices. PHY devices are dedicated hardware that handle the physical + layer of the protocols in the OSI model. + PHYs are commonly used for high speed interfaces such as Serial-ATA + or PCI express. + The API provides functions to initialize/deinitialize the + PHY, power on/off the PHY, and reset the PHY. It's meant to be as + compatible as possible with the equivalent framework found in the + linux kernel. + +config SPL_PHY + bool "PHY Core in SPL" + depends on DM + help + PHY support in SPL. + + This framework is designed to provide a generic interface for PHY + devices. PHY devices are dedicated hardware that handle the physical + layer of the protocols (https://en.wikipedia.org/wiki/OSI_model). + PHYs are commonly used for high speed interfaces such as Serial-ATA + or PCI express. + The API provides functions to initialize/deinitialize the + PHY, power on/off the PHY, and reset the PHY. It's meant to be as + compatible as possible with the equivalent framework found in the + linux kernel. + +endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile new file mode 100644 index 0000000000..45f786a079 --- /dev/null +++ b/drivers/phy/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ +# Written by Jean-Jacques Hiblot <jjhiblot@ti.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o diff --git a/drivers/phy/phy-uclass.c b/drivers/phy/phy-uclass.c new file mode 100644 index 0000000000..0d8bef76db --- /dev/null +++ b/drivers/phy/phy-uclass.c @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Written by Jean-Jacques Hiblot <jjhiblot@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <generic-phy.h> + +DECLARE_GLOBAL_DATA_PTR; + +static inline struct phy_ops *phy_dev_ops(struct udevice *dev) +{ + return (struct phy_ops *)dev->driver->ops; +} + +static int generic_phy_xlate_offs_flags(struct phy *phy, + struct fdtdec_phandle_args *args) +{ + debug("%s(phy=%p)\n", __func__, phy); + + if (args->args_count > 1) { + debug("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + if (args->args_count) + phy->id = args->args[0]; + else + phy->id = 0; + + + return 0; +} + +int generic_phy_get_by_index(struct udevice *dev, int index, + struct phy *phy) +{ + struct fdtdec_phandle_args args; + struct phy_ops *ops; + int ret; + struct udevice *phydev; + + debug("%s(dev=%p, index=%d, phy=%p)\n", __func__, dev, index, phy); + + assert(phy); + ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev_of_offset(dev), + "phys", "#phy-cells", 0, index, + &args); + if (ret) { + debug("%s: fdtdec_parse_phandle_with_args failed: err=%d\n", + __func__, ret); + return ret; + } + + ret = uclass_get_device_by_of_offset(UCLASS_PHY, args.node, &phydev); + if (ret) { + debug("%s: uclass_get_device_by_of_offset failed: err=%d\n", + __func__, ret); + return ret; + } + + phy->dev = phydev; + + ops = phy_dev_ops(phydev); + + if (ops->of_xlate) + ret = ops->of_xlate(phy, &args); + else + ret = generic_phy_xlate_offs_flags(phy, &args); + if (ret) { + debug("of_xlate() failed: %d\n", ret); + goto err; + } + + return 0; + +err: + return ret; +} + +int generic_phy_get_by_name(struct udevice *dev, const char *phy_name, + struct phy *phy) +{ + int index; + + debug("%s(dev=%p, name=%s, phy=%p)\n", __func__, dev, phy_name, phy); + + index = fdt_stringlist_search(gd->fdt_blob, dev_of_offset(dev), + "phy-names", phy_name); + if (index < 0) { + debug("fdt_stringlist_search() failed: %d\n", index); + return index; + } + + return generic_phy_get_by_index(dev, index, phy); +} + +int generic_phy_init(struct phy *phy) +{ + struct phy_ops const *ops = phy_dev_ops(phy->dev); + + return ops->init ? ops->init(phy) : 0; +} + +int generic_phy_reset(struct phy *phy) +{ + struct phy_ops const *ops = phy_dev_ops(phy->dev); + + return ops->reset ? ops->reset(phy) : 0; +} + +int generic_phy_exit(struct phy *phy) +{ + struct phy_ops const *ops = phy_dev_ops(phy->dev); + + return ops->exit ? ops->exit(phy) : 0; +} + +int generic_phy_power_on(struct phy *phy) +{ + struct phy_ops const *ops = phy_dev_ops(phy->dev); + + return ops->power_on ? ops->power_on(phy) : 0; +} + +int generic_phy_power_off(struct phy *phy) +{ + struct phy_ops const *ops = phy_dev_ops(phy->dev); + + return ops->power_off ? ops->power_off(phy) : 0; +} + +UCLASS_DRIVER(phy) = { + .id = UCLASS_PHY, + .name = "phy", +}; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 4e7cc935bd..1f7e32c31f 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -56,6 +56,7 @@ enum uclass_id { UCLASS_PCH, /* x86 platform controller hub */ UCLASS_PCI, /* PCI bus */ UCLASS_PCI_GENERIC, /* Generic PCI bus device */ + UCLASS_PHY, /* Physical Layer (PHY) device */ UCLASS_PINCONFIG, /* Pin configuration node device */ UCLASS_PINCTRL, /* Pinctrl (pin muxing/configuration) device */ UCLASS_PMIC, /* PMIC I/O device */ diff --git a/include/generic-phy.h b/include/generic-phy.h new file mode 100644 index 0000000000..d8cf0c9f6a --- /dev/null +++ b/include/generic-phy.h @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Written by Jean-Jacques Hiblot <jjhiblot@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __GENERIC_PHY_H +#define __GENERIC_PHY_H + + +/** + * struct phy - A handle to (allowing control of) a single phy port. + * + * Clients provide storage for phy handles. The content of the structure is + * managed solely by the PHY API and PHY drivers. A phy struct is + * initialized by "get"ing the phy struct. The phy struct is passed to all + * other phy APIs to identify which PHY port to operate upon. + * + * @dev: The device which implements the PHY port. + * @id: The PHY ID within the provider. + * + */ +struct phy { + struct udevice *dev; + unsigned long id; +}; + +/* + * struct udevice_ops - set of function pointers for phy operations + * @init: operation to be performed for initializing phy (optional) + * @exit: operation to be performed while exiting (optional) + * @reset: reset the phy (optional). + * @power_on: powering on the phy (optional) + * @power_off: powering off the phy (optional) + */ +struct phy_ops { + /** + * of_xlate - Translate a client's device-tree (OF) phy specifier. + * + * The PHY core calls this function as the first step in implementing + * a client's generic_phy_get_by_*() call. + * + * If this function pointer is set to NULL, the PHY core will use a + * default implementation, which assumes #phy-cells = <0> or + * #phy-cells = <1>, and in the later case that the DT cell + * contains a simple integer PHY port ID. + * + * @phy: The phy struct to hold the translation result. + * @args: The phy specifier values from device tree. + * @return 0 if OK, or a negative error code. + */ + int (*of_xlate)(struct phy *phy, + struct fdtdec_phandle_args *args); + + /** + * init - initialize the hardware. + * + * Hardware intialization should not be done in during probe() but + * should be implemented in this init() function. It could be starting + * PLL, taking a controller out of reset, routing, etc. This function + * is typically called only once per PHY port. + * If power_on() is not implemented, it must power up the phy. + * + * @phy: the PHY port to initialize + * @return 0 if OK, or a negative error code. + */ + int (*init)(struct phy *phy); + + /** + * exit - de-initialize the PHY device + * + * Hardware de-intialization should be done here. Every step done in + * init() should be undone here. + * This could be used to suspend the phy to reduce power consumption or + * to put the phy in a known condition before booting the OS (though it + * is NOT called automatically before booting the OS) + * If power_off() is not implemented, it must power down the phy. + * + * @phy: PHY port to be de-initialized + * @return 0 if OK, or a negative error code + */ + int (*exit)(struct phy *phy); + + /** + * reset - resets a PHY device without shutting down + * + * @phy: PHY port to be reset + * + * During runtime, the PHY may need to be reset in order to + * re-establish connection etc without being shut down or exit. + * + * @return 0 if OK, or a negative error code + */ + int (*reset)(struct phy *phy); + + /** + * power_on - power on a PHY device + * + * @phy: PHY port to be powered on + * + * During runtime, the PHY may need to be powered on or off several + * times. This function is used to power on the PHY. It relies on the + * setup done in init(). If init() is not implemented, it must take care + * of setting up the context (PLLs, ...) + * + * @return 0 if OK, or a negative error code + */ + int (*power_on)(struct phy *phy); + + /** + * power_off - power off a PHY device + * + * @phy: PHY port to be powered off + * + * During runtime, the PHY may need to be powered on or off several + * times. This function is used to power off the PHY. Except if + * init()/deinit() are not implemented, it must not de-initialize + * everything. + * + * @return 0 if OK, or a negative error code + */ + int (*power_off)(struct phy *phy); +}; + + +/** + * generic_phy_init() - initialize the PHY port + * + * @phy: the PHY port to initialize + * @return 0 if OK, or a negative error code + */ +int generic_phy_init(struct phy *phy); + +/** + * generic_phy_init() - de-initialize the PHY device + * + * @phy: PHY port to be de-initialized + * @return 0 if OK, or a negative error code + */ +int generic_phy_exit(struct phy *phy); + +/** + * generic_phy_reset() - resets a PHY device without shutting down + * + * @phy: PHY port to be reset + *@return 0 if OK, or a negative error code + */ +int generic_phy_reset(struct phy *phy); + +/** + * generic_phy_power_on() - power on a PHY device + * + * @phy: PHY port to be powered on + * @return 0 if OK, or a negative error code + */ +int generic_phy_power_on(struct phy *phy); + +/** + * generic_phy_power_off() - power off a PHY device + * + * @phy: PHY port to be powered off + * @return 0 if OK, or a negative error code + */ +int generic_phy_power_off(struct phy *phy); + + +/** + * generic_phy_get_by_index() - Get a PHY device by integer index. + * + * @user: the client device + * @index: The index in the list of available PHYs + * @phy: A pointer to the PHY port + * + * This looks up a PHY device for a client device based on its position in the + * list of the possible PHYs. + * + * example: + * usb1: usb_otg_ss@xxx { + * compatible = "xxx"; + * reg = <xxx>; + * . + * . + * phys = <&usb2_phy>, <&usb3_phy>; + * . + * . + * }; + * the USB2 phy can be accessed by passing index '0' and the USB3 phy can + * be accessed by passing index '1' + * + * @return 0 if OK, or a negative error code + */ +int generic_phy_get_by_index(struct udevice *user, int index, + struct phy *phy); + +/** + * generic_phy_get_by_name() - Get a PHY device by its name. + * + * @user: the client device + * @phy_name: The name of the PHY in the list of possible PHYs + * @phy: A pointer to the PHY port + * + * This looks up a PHY device for a client device in the + * list of the possible PHYs based on its name. + * + * example: + * usb1: usb_otg_ss@xxx { + * compatible = "xxx"; + * reg = <xxx>; + * . + * . + * phys = <&usb2_phy>, <&usb3_phy>; + * phy-names = "usb2phy", "usb3phy"; + * . + * . + * }; + * the USB3 phy can be accessed using "usb3phy", and USB2 by using "usb2phy" + * + * @return 0 if OK, or a negative error code + */ +int generic_phy_get_by_name(struct udevice *user, const char *phy_name, + struct phy *phy); + +#endif /*__GENERIC_PHY_H */ |