diff options
| -rw-r--r-- | arch/x86/dts/dfi-bt700.dtsi | 12 | ||||
| -rw-r--r-- | board/dfi/dfi-bt700/Kconfig | 1 | ||||
| -rw-r--r-- | board/dfi/dfi-bt700/dfi-bt700.c | 27 |
3 files changed, 40 insertions, 0 deletions
diff --git a/arch/x86/dts/dfi-bt700.dtsi b/arch/x86/dts/dfi-bt700.dtsi index 04aa95ad52..b62e00ff1f 100644 --- a/arch/x86/dts/dfi-bt700.dtsi +++ b/arch/x86/dts/dfi-bt700.dtsi @@ -47,6 +47,15 @@ pad-offset = <0x3a0>; mode-func = <1>; }; + + xhci_hub_reset: usb_ulpi_stp@0 { + gpio-offset = <0xa0 10>; + pad-offset = <0x23b0>; + mode-func = <0>; + mode-gpio; + output-value = <1>; + direction = <PIN_OUTPUT>; + }; }; chosen { @@ -261,6 +270,9 @@ fsp,enable-spi; fsp,enable-sata; fsp,sata-mode = <SATA_MODE_AHCI>; +#ifdef CONFIG_USB_XHCI_HCD + fsp,enable-xhci; +#endif fsp,lpe-mode = <LPE_MODE_PCI>; fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>; fsp,enable-dma0; diff --git a/board/dfi/dfi-bt700/Kconfig b/board/dfi/dfi-bt700/Kconfig index 3f0acb39f7..fca8b53d02 100644 --- a/board/dfi/dfi-bt700/Kconfig +++ b/board/dfi/dfi-bt700/Kconfig @@ -21,6 +21,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select X86_RESET_VECTOR if !EFI_STUB select INTEL_BAYTRAIL select BOARD_ROMSIZE_KB_8192 + select BOARD_LATE_INIT config PCIE_ECAM_BASE default 0xe0000000 diff --git a/board/dfi/dfi-bt700/dfi-bt700.c b/board/dfi/dfi-bt700/dfi-bt700.c index 8645bdc795..3dd2036d11 100644 --- a/board/dfi/dfi-bt700/dfi-bt700.c +++ b/board/dfi/dfi-bt700/dfi-bt700.c @@ -28,3 +28,30 @@ int board_early_init_f(void) return 0; } + +int board_late_init(void) +{ + struct gpio_desc desc; + int ret; + + ret = dm_gpio_lookup_name("F10", &desc); + if (ret) + debug("gpio ret=%d\n", ret); + ret = dm_gpio_request(&desc, "xhci_hub_reset"); + if (ret) + debug("gpio_request ret=%d\n", ret); + ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); + if (ret) + debug("gpio dir ret=%d\n", ret); + + /* Pull xHCI hub reset to low (active low) */ + dm_gpio_set_value(&desc, 0); + + /* Wait at least 5 ms, so lets choose 10 to be safe */ + mdelay(10); + + /* Pull xHCI hub reset to high (active low) */ + dm_gpio_set_value(&desc, 1); + + return 0; +} |