diff options
| -rw-r--r-- | arch/arm/mach-mvebu/include/mach/cpu.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c | 46 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 24 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 35 | ||||
| -rw-r--r-- | drivers/ddr/marvell/a38x/ddr3_training_leveling.c | 2 | ||||
| -rw-r--r-- | drivers/ddr/marvell/a38x/mv_ddr_plat.c | 8 | ||||
| -rw-r--r-- | drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h | 7 | ||||
| -rw-r--r-- | scripts/config_whitelist.txt | 1 | ||||
| -rw-r--r-- | tools/Makefile | 4 |
9 files changed, 3 insertions, 126 deletions
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index c3f8ad8506..52473ade7a 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -164,7 +164,7 @@ int serdes_phy_config(void); int ddr3_init(void); /* Auto Voltage Scaling */ -#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) +#if defined(CONFIG_ARMADA_38X) void mv_avs_init(void); void mv_rtc_config(void); #else diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c index ae2a361104..3b41c7d49b 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c @@ -14,11 +14,6 @@ #include "sys_env_lib.h" #include "ctrl_pex.h" -#if defined(CONFIG_ARMADA_38X) -#elif defined(CONFIG_ARMADA_39X) -#else -#error "No device is defined" -#endif /* @@ -79,11 +74,6 @@ u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = { { NA, 0x6, NA, NA, 0x4, NA, NA }, /* USB3_HOST0 */ { NA, NA, NA, 0x5, NA, 0x4, NA }, /* USB3_HOST1 */ { NA, NA, NA, 0x6, 0x5, 0x5, NA }, /* USB3_DEVICE */ -#ifdef CONFIG_ARMADA_39X - { NA, NA, 0x5, NA, 0x8, NA, 0x2 }, /* SGMII3 */ - { NA, NA, NA, 0x8, 0x9, 0x8, 0x4 }, /* XAUI */ - { NA, NA, NA, NA, NA, 0x8, 0x4 }, /* RXAUI */ -#endif { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, NA } /* DEFAULT_SERDES */ }; @@ -798,11 +788,9 @@ struct op_params serdes_power_down_params[] = { */ u8 hws_ctrl_serdes_rev_get(void) { -#ifdef CONFIG_ARMADA_38X /* for A38x-Z1 */ if (sys_env_device_rev_get() == MV_88F68XX_Z1_ID) return MV_SERDES_REV_1_2; -#endif /* for A39x-Z1, A38x-A0 */ return MV_SERDES_REV_2_1; @@ -1351,9 +1339,6 @@ enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type, case SGMII0: case SGMII1: case SGMII2: -#ifdef CONFIG_ARMADA_39X - case SGMII3: -#endif if (baud_rate == SERDES_SPEED_1_25_GBPS) seq_id = SGMII_1_25_SPEED_CONFIG_SEQ; else if (baud_rate == SERDES_SPEED_3_125_GBPS) @@ -1362,14 +1347,6 @@ enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type, case QSGMII: seq_id = QSGMII_5_SPEED_CONFIG_SEQ; break; -#ifdef CONFIG_ARMADA_39X - case XAUI: - seq_id = XAUI_3_125_SPEED_CONFIG_SEQ; - break; - case RXAUI: - seq_id = RXAUI_6_25_SPEED_CONFIG_SEQ; - break; -#endif default: return SERDES_LAST_SEQ; } @@ -2054,13 +2031,6 @@ int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type, (serdes_num, PEX_CONFIG_REF_CLOCK_100MHZ_SEQ)); return MV_OK; -#ifdef CONFIG_ARMADA_39X - case REF_CLOCK_40MHZ: - CHECK_STATUS(mv_seq_exec - (serdes_num, - PEX_CONFIG_REF_CLOCK_40MHZ_SEQ)); - return MV_OK; -#endif default: printf ("%s: Error: ref_clock %d for SerDes lane #%d, type %d is not supported\n", @@ -2104,22 +2074,6 @@ int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type, return MV_BAD_PARAM; } break; -#ifdef CONFIG_ARMADA_39X - case SGMII3: - case XAUI: - case RXAUI: - if (ref_clock == REF_CLOCK_25MHZ) { - data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1; - } else if (ref_clock == REF_CLOCK_40MHZ) { - data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL; - } else { - printf - ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n", - serdes_type); - return MV_BAD_PARAM; - } - break; -#endif default: DEBUG_INIT_S("hws_ref_clock_set: not supported serdes type\n"); return MV_BAD_PARAM; diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c index 3c4c7e01a1..950680a581 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c @@ -12,7 +12,6 @@ #include "seq_exec.h" #include "sys_env_lib.h" -#ifdef CONFIG_ARMADA_38X enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = { /* 6820 6810 6811 6828 */ /* PEX_UNIT_ID */ { 4, 3, 3, 4}, @@ -24,19 +23,6 @@ enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = { /* XAUI_UNIT_ID */ { 0, 0, 0, 0}, /* RXAUI_UNIT_ID */ { 0, 0, 0, 0} }; -#else /* if (CONFIG_ARMADA_39X) */ -enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = { -/* 6920 6928 */ -/* PEX_UNIT_ID */ { 4, 4}, -/* ETH_GIG_UNIT_ID */ { 3, 4}, -/* USB3H_UNIT_ID */ { 1, 2}, -/* USB3D_UNIT_ID */ { 0, 1}, -/* SATA_UNIT_ID */ { 0, 4}, -/* QSGMII_UNIT_ID */ { 0, 1}, -/* XAUI_UNIT_ID */ { 1, 1}, -/* RXAUI_UNIT_ID */ { 1, 1} -}; -#endif u32 g_dev_id = -1; @@ -202,11 +188,7 @@ u16 sys_env_model_get(void) return ctrl_id; default: /* Device ID Default for A38x: 6820 , for A39x: 6920 */ - #ifdef CONFIG_ARMADA_38X default_ctrl_id = MV_6820_DEV_ID; - #else - default_ctrl_id = MV_6920_DEV_ID; - #endif printf("%s: Error retrieving device ID (%x), using default ID = %x\n", __func__, ctrl_id, default_ctrl_id); return default_ctrl_id; @@ -261,9 +243,6 @@ void mv_rtc_config(void) { u32 i, val; - if (!(IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARMADA_39X))) - return; - /* Activate pipe0 for read/write transaction, and set XBAR client number #1 */ val = 0x1 << DFX_PIPE_SELECT_PIPE0_ACTIVE_OFFS | 0x1 << DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS; @@ -278,9 +257,6 @@ void mv_avs_init(void) { u32 sar_freq; - if (!(IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARMADA_39X))) - return; - reg_write(AVS_DEBUG_CNTR_REG, AVS_DEBUG_CNTR_DEFAULT_VALUE); reg_write(AVS_DEBUG_CNTR_REG, AVS_DEBUG_CNTR_DEFAULT_VALUE); diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h index 17cd811331..118bf56602 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h @@ -118,12 +118,8 @@ /* TWSI addresses */ /* starting from A38x A0, i2c address of EEPROM is 0x57 */ -#ifdef CONFIG_ARMADA_39X -#define EEPROM_I2C_ADDR 0x50 -#else #define EEPROM_I2C_ADDR (sys_env_device_rev_get() == \ MV_88F68XX_Z1_ID ? 0x50 : 0x57) -#endif #define RD_GET_MODE_ADDR 0x4c #define DB_GET_MODE_SLM1363_ADDR 0x25 #define DB_GET_MODE_SLM1364_ADDR 0x24 @@ -216,7 +212,6 @@ #define A39X_MV_MARVELL_BOARD_NUM (A39X_MV_MAX_MARVELL_BOARD_ID - \ A39X_MARVELL_BOARD_ID_BASE) -#ifdef CONFIG_ARMADA_38X #define CUTOMER_BOARD_ID_BASE A38X_CUSTOMER_BOARD_ID_BASE #define CUSTOMER_BOARD_ID0 A38X_CUSTOMER_BOARD_ID0 #define CUSTOMER_BOARD_ID1 A38X_CUSTOMER_BOARD_ID1 @@ -227,18 +222,6 @@ #define MV_MARVELL_BOARD_NUM A38X_MV_MARVELL_BOARD_NUM #define MV_DEFAULT_BOARD_ID DB_68XX_ID #define MV_DEFAULT_DEVICE_ID MV_6811 -#elif defined(CONFIG_ARMADA_39X) -#define CUTOMER_BOARD_ID_BASE A39X_CUSTOMER_BOARD_ID_BASE -#define CUSTOMER_BOARD_ID0 A39X_CUSTOMER_BOARD_ID0 -#define CUSTOMER_BOARD_ID1 A39X_CUSTOMER_BOARD_ID1 -#define MV_MAX_CUSTOMER_BOARD_ID A39X_MV_MAX_CUSTOMER_BOARD_ID -#define MV_CUSTOMER_BOARD_NUM A39X_MV_CUSTOMER_BOARD_NUM -#define MARVELL_BOARD_ID_BASE A39X_MARVELL_BOARD_ID_BASE -#define MV_MAX_MARVELL_BOARD_ID A39X_MV_MAX_MARVELL_BOARD_ID -#define MV_MARVELL_BOARD_NUM A39X_MV_MARVELL_BOARD_NUM -#define MV_DEFAULT_BOARD_ID A39X_DB_69XX_ID -#define MV_DEFAULT_DEVICE_ID MV_6920 -#endif #define MV_INVALID_BOARD_ID 0xffffffff @@ -295,11 +278,7 @@ enum { #define MV_6920_INDEX 0 #define MV_6928_INDEX 1 -#ifdef CONFIG_ARMADA_38X #define MAX_DEV_ID_NUM 4 -#else -#define MAX_DEV_ID_NUM 2 -#endif #define MV_6820_INDEX 0 #define MV_6810_INDEX 1 @@ -340,21 +319,13 @@ enum suspend_wakeup_status { * If suspend to RAM is not supported set '-1' */ #ifdef CONFIG_CUSTOMER_BOARD_SUPPORT -#ifdef CONFIG_ARMADA_38X #define MV_BOARD_WAKEUP_GPIO_INFO { \ {A38X_CUSTOMER_BOARD_ID0, -1 }, \ {A38X_CUSTOMER_BOARD_ID0, -1 }, \ }; -#else -#define MV_BOARD_WAKEUP_GPIO_INFO { \ - {A39X_CUSTOMER_BOARD_ID0, -1 }, \ - {A39X_CUSTOMER_BOARD_ID0, -1 }, \ -}; -#endif /* CONFIG_ARMADA_38X */ #else -#ifdef CONFIG_ARMADA_38X #define MV_BOARD_WAKEUP_GPIO_INFO { \ {RD_NAS_68XX_ID, -2 }, \ {DB_68XX_ID, -1 }, \ @@ -364,12 +335,6 @@ enum suspend_wakeup_status { {DB_BP_6821_ID, -2 }, \ {DB_AMC_6820_ID, -2 }, \ }; -#else -#define MV_BOARD_WAKEUP_GPIO_INFO { \ - {A39X_RD_69XX_ID, -1 }, \ - {A39X_DB_69XX_ID, -1 }, \ -}; -#endif /* CONFIG_ARMADA_38X */ #endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */ u32 mv_board_tclk_get(void); diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c index 7f7df6794a..6523281f2b 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c @@ -915,10 +915,8 @@ int ddr3_tip_dynamic_write_leveling(u32 dev_num, int phase_remove) DEBUG_LEVELING(DEBUG_LEVEL_ERROR, ("training done failed\n")); } else { /* check for training pass */ reg_data = data_read[0]; -#if defined(CONFIG_ARMADA_38X) /* JIRA #1498 for 16 bit with ECC */ if (tm->bus_act_mask == 0xb) /* set to data to 0 to skip the check */ reg_data = 0; -#endif if (reg_data != PASS) DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("training result failed\n")); diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c index da0d63d4f7..faafc86ea2 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c +++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c @@ -559,11 +559,7 @@ static int ddr3_tip_a38x_get_medium_freq(int dev_num, enum mv_ddr_freq *freq) static int ddr3_tip_a38x_get_device_info(u8 dev_num, struct ddr3_device_info *info_ptr) { -#if defined(CONFIG_ARMADA_39X) - info_ptr->device_id = 0x6900; -#else info_ptr->device_id = 0x6800; -#endif info_ptr->ck_delay = ck_delay; return MV_OK; @@ -666,11 +662,7 @@ static int mv_ddr_sw_db_init(u32 dev_num, u32 board_id) ddr3_tip_dev_attr_set(dev_num, MV_ATTR_TIP_REV, MV_TIP_REV_4); ddr3_tip_dev_attr_set(dev_num, MV_ATTR_PHY_EDGE, MV_DDR_PHY_EDGE_POSITIVE); ddr3_tip_dev_attr_set(dev_num, MV_ATTR_OCTET_PER_INTERFACE, DDR_INTERFACE_OCTETS_NUM); -#ifdef CONFIG_ARMADA_39X - ddr3_tip_dev_attr_set(dev_num, MV_ATTR_INTERLEAVE_WA, 1); -#else ddr3_tip_dev_attr_set(dev_num, MV_ATTR_INTERLEAVE_WA, 0); -#endif ca_delay = 0; delay_enable = 1; diff --git a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h index cf5142094d..10b0d45b35 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h @@ -79,7 +79,6 @@ enum suspend_wakeup_status { * If suspend to RAM is not supported set '-1' */ -#ifdef CONFIG_ARMADA_38X #define MV_BOARD_WAKEUP_GPIO_INFO { \ {RD_NAS_68XX_ID, -2 }, \ {DB_68XX_ID, -1 }, \ @@ -89,12 +88,6 @@ enum suspend_wakeup_status { {DB_BP_6821_ID, -2 }, \ {DB_AMC_6820_ID, -2 }, \ }; -#else -#define MV_BOARD_WAKEUP_GPIO_INFO { \ - {A39X_RD_69XX_ID, -1 }, \ - {A39X_DB_69XX_ID, -1 }, \ -}; -#endif /* CONFIG_ARMADA_38X */ enum suspend_wakeup_status mv_ddr_sys_env_suspend_wakeup_check(void); u32 mv_ddr_sys_env_get_cs_ena_from_reg(void); diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index e793cd1169..819e362e5b 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -43,7 +43,6 @@ CONFIG_ARC_MMU_VER CONFIG_ARMADA100 CONFIG_ARMADA100_FEC CONFIG_ARMADA168 -CONFIG_ARMADA_39X CONFIG_ARMV7_SECURE_BASE CONFIG_ARMV7_SECURE_MAX_SIZE CONFIG_ARMV7_SECURE_RESERVE_SIZE diff --git a/tools/Makefile b/tools/Makefile index 2d550432ba..62de7e6fe0 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -150,12 +150,12 @@ ifdef CONFIG_SYS_U_BOOT_OFFS HOSTCFLAGS_kwbimage.o += -DCONFIG_SYS_U_BOOT_OFFS=$(CONFIG_SYS_U_BOOT_OFFS) endif -ifneq ($(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X),) +ifneq ($(CONFIG_ARMADA_38X),) HOSTCFLAGS_kwbimage.o += -DCONFIG_KWB_SECURE endif # MXSImage needs LibSSL -ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),) +ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),) HOSTCFLAGS_kwbimage.o += \ $(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "") HOSTLDLIBS_mkimage += \ |