tools: move kermit files to tools/kermit directory

The script files, define2mk.sed and make-asm-offsets
are used to create autoconf.mk and asm-offsets.h
while build.

Whereas README, dot.kermrc, flash_param, send_cmd, send_image
are files useful for kermit.

We should not put files which have the totally different purpose
into the same directory.

This commit creates a new directory, tools/kermit,
and move kermit files into it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

5 files changed, 174 insertions, 0 deletions

diff --git a/tools/kermit/README b/tools/kermit/README
new file mode 100644
index 0000000000..c3b491aa55
--- /dev/null
+++ b/tools/kermit/README
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+This directory contains scripts that help to perform certain actions
+that need to be done frequently when working with U-Boot.
+
+They are meant as EXAMPLE code, so it is very likely that you will
+have to modify them before use.
+
+
+Short description:
+==================
+
+dot.kermrc:
+
+	Example for "~/.kermrc" Kermit init file for use with U-Boot
+
+	by Wolfgang Denk, 24 Jun 2001
+
+flash_param:
+
+	"kermit" script to automatically initialize the environment
+	variables on your target. This is most useful during
+	development when your environment variables are stored in an
+	embedded flash sector which is erased whenever you install a
+	new U-Boot image.
+
+	by Swen Anderson, 10 May 2001
+
+send_cmd:
+
+	send_cmd U_BOOT_COMMAND
+
+	"kermit" script to send a U-Boot command and print the
+	results. When used from a shell with history (like the bash)
+	this indirectly adds kind of history to U-Boot ;-)
+
+	by Swen Anderson, 10 May 2001
+
+send_image:
+
+	send_image FILE_NAME OFFSET
+
+	"kermit" script to automatically download a file to the
+	target using the "loadb" command (kermit binary protocol)
+
+	by Swen Anderson, 10 May 2001
diff --git a/tools/kermit/dot.kermrc b/tools/kermit/dot.kermrc
new file mode 100644
index 0000000000..0fc6c15d35
--- /dev/null
+++ b/tools/kermit/dot.kermrc
@@ -0,0 +1,16 @@
+set line /dev/ttyS0
+set speed 115200
+set carrier-watch off
+set handshake none
+set flow-control none
+robust
+set file type bin
+set file name lit
+set rec pack 1000
+set send pack 1000
+set window 5
+set prompt Kermit>
+define sz !sz \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
+define rz !rz \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
+define sx !sx \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
+define rx !rx \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
diff --git a/tools/kermit/flash_param b/tools/kermit/flash_param
new file mode 100644
index 0000000000..847f99e1eb
--- /dev/null
+++ b/tools/kermit/flash_param
@@ -0,0 +1,60 @@
+#!/usr/bin/kermit +
+# usage: ./flash_param parameters
+# Parameters: IP Address       ETH Address        ERIC Number
+# Format:     xxx.xxx.xxx.xxx  xx:xx:xx:xx:xx:xx  xxxx
+
+set line /dev/ttyS0
+set speed 115200
+set serial 8N1
+set carrier-watch off
+set handshake none
+#set flow-control none
+set flow-control xon/xoff
+#robust
+set file type bin
+set file name lit
+set rec pack 1000
+set send pack 1000
+set window 5
+set prompt Kermit>
+#robust
+# Milliseconds to pause between each OUTPUT character
+set output pacing 1
+
+out \13
+in 10 =>
+#first erase the environment memory within NVRAM
+out mw f0000000 0 200\13
+in 10 =>
+out reset\13
+in 5 autoboot
+out \13\13
+in 10 =>
+#set additional env parameter
+out setenv ethaddr \%2\13
+in 10 =>
+out setenv serial# ERIC 1.0 \%3\13
+in 10 =>
+out setenv eric_id \%3\13
+in 10 =>
+#out setenv prec_videocard_bus unknown\13
+#in 10 =>
+#out setenv prec_bios_type unknown\13
+#in 10 =>
+out setenv eric_passwd .eRIC.\13
+in 10 =>
+#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1:192.168.1.100:192.168.1.254:255.255.255.0\13
+#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1:192.168.0.1\13
+#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1\13
+out setenv bootargs console=/dev/ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.26:/eric_root_devel ip=\%1:192.168.1.26\13
+in 10 =>
+out setenv bootcmd bootm FFC00000\13
+in 10 =>
+out saveenv\13
+in 10 =>
+out reset\13
+in 5 autoboot
+out \13\13
+in 10 =>
+quit
+exit 0
diff --git a/tools/kermit/send_cmd b/tools/kermit/send_cmd
new file mode 100644
index 0000000000..4131331f03
--- /dev/null
+++ b/tools/kermit/send_cmd
@@ -0,0 +1,21 @@
+#!/usr/bin/kermit +
+set line /dev/ttyS0
+set speed 115200
+set serial 8N1
+set carrier-watch off
+set handshake none
+set flow-control none
+robust
+set file type bin
+set file name lit
+set rec pack 1000
+set send pack 1000
+set window 5
+set prompt Kermit>
+
+#out \13
+#in 10 =>
+out \%1 \%2 \%3 \%4 \%5 \%6 \%7\13
+in 10 =>
+quit
+exit 0
diff --git a/tools/kermit/send_image b/tools/kermit/send_image
new file mode 100644
index 0000000000..9b89d6b059
--- /dev/null
+++ b/tools/kermit/send_image
@@ -0,0 +1,26 @@
+#!/usr/bin/kermit +
+# usage: send_image FILE_NAME OFFSET
+# e.g.   send_image output.bin 1F00000
+set line /dev/ttyS0
+set speed 115200
+set serial 8N1
+set carrier-watch off
+set handshake none
+set flow-control none
+robust
+set file type bin
+set file name lit
+set rec pack 1000
+set send pack 1000
+set window 5
+set prompt Kermit>
+
+out \13
+in 10 =>
+out loadb \%2 \13
+in 10 download ...
+send \%1
+out \13
+in 10 ## Start Addr
+quit
+exit 0