diff options
author | Tom Rini <trini@konsulko.com> | 2021-04-11 14:11:05 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2021-04-11 14:11:05 -0400 |
commit | 3b676a1662ac6b54d1e97ea40a0c41ee0925ffe3 (patch) | |
tree | d793c47b6ee68f30fb1426d526ac66f15b7cb636 /include/configs/bcm28155_ap.h | |
parent | c6a4ee2aaee541c12d290dd25561e771396817cc (diff) | |
parent | d3cfc474b764fc9d8fca6dc1dfe56f42e564f0f5 (diff) | |
download | u-boot-3b676a1662ac6b54d1e97ea40a0c41ee0925ffe3.tar.gz u-boot-3b676a1662ac6b54d1e97ea40a0c41ee0925ffe3.tar.xz u-boot-3b676a1662ac6b54d1e97ea40a0c41ee0925ffe3.zip |
Merge branch '2021-04-11-remove-non-migrated-boards'
- Remove a large number of boards that have not migrated to DM_MMC, for
which the migration deadline with 2 years ago at v2019.04.
Diffstat (limited to 'include/configs/bcm28155_ap.h')
-rw-r--r-- | include/configs/bcm28155_ap.h | 97 |
1 files changed, 0 insertions, 97 deletions
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h deleted file mode 100644 index c84a5ca2e5..0000000000 --- a/include/configs/bcm28155_ap.h +++ /dev/null @@ -1,97 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013 Broadcom Corporation. - */ - -#ifndef __BCM28155_AP_H -#define __BCM28155_AP_H - -#include <linux/sizes.h> -#include <asm/arch/sysmap.h> - -/* CPU, chip, mach, etc */ -#define CONFIG_KONA -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Memory configuration - */ - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_SDRAM_SIZE 0x80000000 - -#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */ - -/* GPIO Driver */ -#define CONFIG_KONA_GPIO - -/* MMC/SD Driver */ -#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR -#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR -#define CONFIG_SYS_SDIO0_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO1_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO2_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO3_MAX_CLK 48000000 -#define CONFIG_SYS_SDIO0 "sdio1" -#define CONFIG_SYS_SDIO1 "sdio2" -#define CONFIG_SYS_SDIO2 "sdio3" -#define CONFIG_SYS_SDIO3 "sdio4" - -/* I2C Driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_KONA -#define CONFIG_SYS_SPD_BUS_NUM 3 /* Start with PMU bus */ -#define CONFIG_SYS_MAX_I2C_BUS 4 -#define CONFIG_SYS_I2C_BASE0 BSC1_BASE_ADDR -#define CONFIG_SYS_I2C_BASE1 BSC2_BASE_ADDR -#define CONFIG_SYS_I2C_BASE2 BSC3_BASE_ADDR -#define CONFIG_SYS_I2C_BASE3 PMU_BSC_BASE_ADDR - -/* Timer Driver */ -#define CONFIG_SYS_TIMER_RATE 32000 -#define CONFIG_SYS_TIMER_COUNTER (TIMER_BASE_ADDR + 4) /* STCLO offset */ - -/* Init functions */ - -/* Some commands use this as the default load address */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE - -/* No mtest functions as recommended */ - -/* - * This is the initial SP which is used only briefly for relocating the u-boot - * image to the top of SDRAM. After relocation u-boot moves the stack to the - * proper place. - */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE - -/* Serial Info */ -#define CONFIG_SYS_NS16550_SERIAL -/* Post pad 3 bytes after each reg addr */ -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 13000000 -#define CONFIG_SYS_NS16550_COM1 0x3e000000 - -/* must fit into GPT:u-boot-env partition */ - -/* console configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * One partition type must be defined for part.c - * This is necessary for the fatls command to work on an SD card - * for example. - */ - -/* version string, parser, etc */ - -/* Initial upstream - boot to cmd prompt only */ -#define CONFIG_BOOTCOMMAND "" - -#define CONFIG_USBID_ADDR 0x34052c46 - -#endif /* __BCM28155_AP_H */ |