OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support

- Add required UBI/UBIFS config definitions
- Add reasonable MTD partition layout
- Remove JFFS2 config definitions
- Drop some CFI verbage and definitions
- Make comment 'one-liners' truly one line
- Improve readability and content arrangement

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

1 files changed, 151 insertions, 158 deletions

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 98a59c574a..5b689a85f9 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -13,14 +13,17 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_CACHELINE_SIZE	64
+/* High Level Configuration Options */
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP3_AM3517EVM	1	/* working with AM3517EVM */
+#define CONFIG_OMAP
 #define CONFIG_OMAP_COMMON
+
+#define CONFIG_SYS_CACHELINE_SIZE	64
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
@@ -28,59 +31,48 @@
 
 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */
 
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE		0x80100000
+#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
+/* Display CPU and Board information */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_OF_LIBFDT
+#define CONFIG_MISC_INIT_R
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
 
 /* Clock Defines */
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)
 
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(16 << 20)
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-/*
- * DDR related
- */
-#define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
+/* Hardware drivers */
 
-/*
- * OMAP GPIO configuration
- */
+/* OMAP GPIO configuration */
 #define CONFIG_OMAP_GPIO
 
-/*
- * NS16550 Configuration
- */
+/* NS16550 Configuration */
 #define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
 
-/*
- * select serial console configuration
- */
+/* select serial console configuration */
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
 #define CONFIG_SERIAL3			3	/* UART3 on AM3517 EVM */
@@ -90,10 +82,12 @@
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
-#define CONFIG_MMC			1
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
 
 /*
  * USB configuration
@@ -111,7 +105,6 @@
 
 #define CONFIG_USB_STORAGE
 #define CONGIG_CMD_STORAGE
-#define CONFIG_CMD_FAT
 
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
@@ -129,30 +122,29 @@
 #endif /* CONFIG_USB_MUSB_AM35X */
 
 /* commands to include */
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
-
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_PART
+#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BOOTZ
-
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
-#define CONFIG_CMD_NAND		/* NAND support			*/
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MMC
 #define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_PING
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MTDPARTS
 
-
-#define CONFIG_SYS_NO_FLASH
+/* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_OMAP34XX
 
-/*
- * Ethernet
- */
+/* Ethernet */
 #define CONFIG_DRIVER_TI_EMAC
 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 #define CONFIG_MII
@@ -162,23 +154,66 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT		10
 
-/*
- * Board NAND Info.
- */
+/* Board NAND Info. */
+#ifdef CONFIG_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
+#define CONFIG_BCH
+#define CONFIG_CMD_UBI			/* UBI-formated MTD partition support */
+#define CONFIG_CMD_UBIFS		/* Read-only UBI volume operations */
+#define CONFIG_RBTREE			/* required by CONFIG_CMD_UBI */
+#define CONFIG_LZO			/* required by CONFIG_CMD_UBIFS */
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access */
 							/* nand at CS0 */
-
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV		"nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET	0x680000
-#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* sz of jffs2 part */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, 10, \
+					 11, 12, 13, 14, 16, 17, 18, 19, 20, \
+					 21, 22, 23, 24, 25, 26, 27, 28, 30, \
+					 31, 32, 33, 34, 35, 36, 37, 38, 39, \
+					 40, 41, 42, 44, 45, 46, 47, 48, 49, \
+					 50, 51, 52, 53, 54, 55, 56 }
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	13
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
+#define CONFIG_SYS_NAND_MAX_ECCPOS	56
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+#define CONFIG_MTD_PARTITIONS		/* required for UBI partition support */
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+/* NAND block size is 128 KiB.  Synchronize these values with
+ * corresponding Device Tree entries in Linux:
+ *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
+ *  U-Boot              15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000
+ *  U-Boot environment   2 * NAND_BLOCK_SIZE = 256 KiB  @ 0x260000
+ *  Kernel              64 * NAND_BLOCK_SIZE = 8 MiB    @ 0x2A0000
+ *  DTB                  4 * NAND_BLOCK_SIZE = 512 KiB  @ 0xAA0000
+ *  RootFS              Remaining Flash Space           @ 0xB20000
+ */
+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"	\
+	"512k(MLO),"					\
+	"1920k(u-boot),"				\
+	"256k(u-boot-env),"				\
+	"8m(kernel),"					\
+	"512k(dtb),"					\
+	"-(rootfs)"
+#else
+#define MTDIDS_DEFAULT
+#define MTDPARTS_DEFAULT
+#endif /* CONFIG_NAND */
 
 /* Environment information */
 #define CONFIG_BOOTDELAY	10
@@ -194,18 +229,24 @@
 	"bootenv=uEnv.txt\0" \
 	"cmdline=\0" \
 	"optargs=\0" \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext4 rootwait fixrtc\0" \
 	"mmcargs=setenv bootargs console=${console} " \
+		"${mtdparts} " \
 		"${optargs} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype} " \
 		"${cmdline}\0" \
 	"nandargs=setenv bootargs console=${console} " \
-		"root=/dev/mtdblock4 rw " \
-		"rootfstype=jffs2\0" \
+		"${mtdparts} " \
+		"${optargs} " \
+		"root=ubi0:rootfs rw ubi.mtd=rootfs " \
+		"rootfstype=ubifs rootwait " \
+		"${cmdline}\0" \
 	"loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootenv}\0"\
 	"importbootenv=echo Importing environment from mmc ...; " \
 		"env import -t ${loadaddr} ${filesize}\0" \
@@ -218,8 +259,9 @@
 		"bootz ${loadaddr} - ${fdtaddr}\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
-		"nand read ${loadaddr} 280000 400000; " \
-		"bootm ${loadaddr}\0" \
+		"nand read ${loadaddr} 2a0000 800000; " \
+		"nand read ${fdtaddr} aa0000 80000; " \
+		"bootm ${loadaddr} - ${fdtaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev}; if mmc rescan; then " \
@@ -240,20 +282,25 @@
 		"fi; " \
 	"else run nandboot; fi"
 
-#define CONFIG_AUTO_COMPLETE	1
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+/* Miscellaneous configurable options */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_PARTITION_UUIDS
+
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS		64
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		512
 /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		32	/* max number of command */
-						/* args */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
+					+ sizeof(CONFIG_SYS_PROMPT) + 16)
 /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
@@ -270,16 +317,18 @@
 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
 
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+/* Physical Memory Map */
+#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
+#define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
+/* FLASH and environment organization */
 
 /* **** PISMO SUPPORT *** */
 #define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors */
@@ -287,42 +336,19 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
-#if defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_NAND)
 #define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_ENV_IS_IN_NAND		1
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
-
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+#define CONFIG_ENV_SIZE			CONFIG_SYS_ENV_SECT_SIZE
+#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
-					CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_ENV_IS_IN_NAND
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
@@ -337,7 +363,7 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
@@ -350,41 +376,8 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_MTD_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
-/* NAND boot config */
-#define CONFIG_BCH
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, 10, \
-					 11, 12, 13, 14, 16, 17, 18, 19, 20, \
-					 21, 22, 23, 24, 25, 26, 27, 28, 30, \
-					 31, 32, 33, 34, 35, 36, 37, 38, 39, \
-					 40, 41, 42, 44, 45, 46, 47, 48, 49, \
-					 50, 51, 52, 53, 54, 55, 56 }
-
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	13
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_MAX_OOBFREE	2
-#define CONFIG_SYS_NAND_MAX_ECCPOS	56
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE		0x80100000
-#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-
 #endif /* __CONFIG_H */