net: phy: fixed: Be compatible with live OF tree

On systems that use CONFIG_OF_LIVE, the "ofnode" type is defined
as const struct device_node *np, while on the flat DT systems it
is defined as a long of_offset into gd->fdt_blob.

It is desirable that the fixed PHY driver uses the higher-level
ofnode abstraction instead of parsing gd->fdt_blob directly,
because that enables it to work on live OF systems.

The fixed PHY driver has used a nasty hack since its introduction in
commit db40c1aa1c10 ("drivers/net/phy: add fixed-phy /
fixed-link support"),
which is to pass the long gd->fdt_blob offset inside int phydev->addr
(a value that normally holds the MDIO bus address at which the PHY
responds). Even ignoring the fact that the types were already
mismatched leading to a potential truncation (flat OF offset was
supposed to be a long and not an int), we really cannot extend this
hack any longer, because there's no way an int will hold the other
representation of ofnode, the struct device_node *np.

So we unfortunately need to do the right thing, which is to use the
framework introduced by Grygorii Strashko in
commit eef0b8a930d1 ("net: phy: add ofnode node to struct phy_device").
This will populate phydev->node for the fixed PHY.

Note that phydev->node will not be valid in the probe function, since
that is called synchronously from phy_device_create and we really have
no way of passing the ofnode directly through the phy_device_create API.
So we do what other drivers do too: we move the OF parsing logic from
the .probe to the .config method of the PHY driver. The new function
will be called at phy_config() time.

I do believe I've converted all the possible call paths for creating
a PHY with PHY_FIXED_ID, so there is really no reason to maintain
compatibility with the old logic of retrieving a flat OF tree offset
from phydev->addr. We just pass 0 to phydev->addr now.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210216224804.3355044-2-olteanv@gmail.com>
[bmeng: keep fixedphy_probe(); update mdio-uclass.c to handle fixed phy]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

2 files changed, 32 insertions, 24 deletions

diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index 1a38c29469..11342df1c5 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -17,13 +17,23 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int fixedphy_probe(struct phy_device *phydev)
 {
+	/* fixed-link phy must not be reset by core phy code */
+	phydev->flags |= PHY_FLAG_BROKEN_RESET;
+
+	return 0;
+}
+
+int fixedphy_config(struct phy_device *phydev)
+{
+	ofnode node = phy_get_ofnode(phydev);
 	struct fixed_link *priv;
-	int ofnode = phydev->addr;
 	u32 val;
 
+	if (!ofnode_valid(node))
+		return -EINVAL;
+
 	/* check for mandatory properties within fixed-link node */
-	val = fdt_getprop_u32_default_node(gd->fdt_blob,
-					   ofnode, 0, "speed", 0);
+	val = ofnode_read_u32_default(node, "speed", 0);
 	if (val != SPEED_10 && val != SPEED_100 && val != SPEED_1000 &&
 	    val != SPEED_2500 && val != SPEED_10000) {
 		printf("ERROR: no/invalid speed given in fixed-link node!");
@@ -38,12 +48,9 @@ int fixedphy_probe(struct phy_device *phydev)
 	phydev->priv = priv;
 
 	priv->link_speed = val;
-	priv->duplex = fdtdec_get_bool(gd->fdt_blob, ofnode, "full-duplex");
-	priv->pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "pause");
-	priv->asym_pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "asym-pause");
-
-	/* fixed-link phy must not be reset by core phy code */
-	phydev->flags |= PHY_FLAG_BROKEN_RESET;
+	priv->duplex = ofnode_read_bool(node, "full-duplex");
+	priv->pause = ofnode_read_bool(node, "pause");
+	priv->asym_pause = ofnode_read_bool(node, "asym-pause");
 
 	return 0;
 }
@@ -72,6 +79,7 @@ static struct phy_driver fixedphy_driver = {
 	.name		= "Fixed PHY",
 	.features	= PHY_GBIT_FEATURES | SUPPORTED_MII,
 	.probe		= fixedphy_probe,
+	.config		= fixedphy_config,
 	.startup	= fixedphy_startup,
 	.shutdown	= fixedphy_shutdown,
 };
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 89e3076bfd..2feb559bba 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -988,6 +988,7 @@ static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
 struct phy_device *fixed_phy_create(ofnode node)
 {
 	phy_interface_t interface = PHY_INTERFACE_MODE_NONE;
+	struct phy_device *phydev;
 	const char *if_str;
 	ofnode subnode;
 
@@ -1004,8 +1005,11 @@ struct phy_device *fixed_phy_create(ofnode node)
 		return NULL;
 	}
 
-	return phy_device_create(NULL, ofnode_to_offset(subnode), PHY_FIXED_ID,
-				 false, interface);
+	phydev = phy_device_create(NULL, 0, PHY_FIXED_ID, false, interface);
+	if (phydev)
+		phydev->node = subnode;
+
+	return phydev;
 }
 
 #ifdef CONFIG_DM_ETH
@@ -1018,20 +1022,16 @@ static struct phy_device *phy_connect_fixed(struct mii_dev *bus,
 					    phy_interface_t interface)
 #endif
 {
-	struct phy_device *phydev = NULL;
-	int sn;
-	const char *name;
+	ofnode node = dev_ofnode(dev), subnode;
+	struct phy_device *phydev;
 
-	sn = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev));
-	while (sn > 0) {
-		name = fdt_get_name(gd->fdt_blob, sn, NULL);
-		if (name && strcmp(name, "fixed-link") == 0) {
-			phydev = phy_device_create(bus, sn, PHY_FIXED_ID, false,
-						   interface);
-			break;
-		}
-		sn = fdt_next_subnode(gd->fdt_blob, sn);
-	}
+	subnode = ofnode_find_subnode(node, "fixed-link");
+	if (!ofnode_valid(subnode))
+		return NULL;
+
+	phydev = phy_device_create(bus, 0, PHY_FIXED_ID, false, interface);
+	if (phydev)
+		phydev->node = subnode;
 
 	return phydev;
 }