pmic: pmic_hi6553: Add a driver for the hi6553 pmic found on hikey board.

This adds a simple pmic driver for the hi6553 pmic which is used in
conjunction with the hi6220 SoC on the hikey board. Eventually this
driver will be updated to be a proper UCLASS PMIC driver which
can parse the voltages direct from device tree.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>

2 files changed, 134 insertions, 0 deletions

diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 25b3f92e4f..99c5778334 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o
 obj-$(CONFIG_POWER_TPS65218) += pmic_tps62362.o
 obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
 obj-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o
+obj-$(CONFIG_POWER_HI6553) += pmic_hi6553.o
diff --git a/drivers/power/pmic/pmic_hi6553.c b/drivers/power/pmic/pmic_hi6553.c
new file mode 100644
index 0000000000..0af798753e
--- /dev/null
+++ b/drivers/power/pmic/pmic_hi6553.c
@@ -0,0 +1,133 @@
+/*
+ *  Copyright (C) 2015 Linaro
+ *  Peter Griffin <peter.griffin@linaro.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <asm/io.h>
+#include <common.h>
+#include <power/pmic.h>
+#include <power/max8997_muic.h>
+#include <power/hi6553_pmic.h>
+#include <errno.h>
+
+u8 *pmussi_base;
+
+uint8_t hi6553_readb(u32 offset)
+{
+	return readb(pmussi_base + (offset << 2));
+}
+
+void hi6553_writeb(u32 offset, uint8_t value)
+{
+	writeb(value, pmussi_base + (offset << 2));
+}
+
+int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
+{
+	if (check_reg(p, reg))
+		return -1;
+
+	hi6553_writeb(reg, (uint8_t)val);
+
+	return 0;
+}
+
+int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
+{
+	if (check_reg(p, reg))
+		return -1;
+
+	*val = (u32)hi6553_readb(reg);
+
+	return 0;
+}
+
+static void hi6553_init(void)
+{
+	int data;
+
+	hi6553_writeb(HI6553_PERI_EN_MARK, 0x1e);
+	hi6553_writeb(HI6553_NP_REG_ADJ1, 0);
+	data = HI6553_DISABLE6_XO_CLK_CONN | HI6553_DISABLE6_XO_CLK_NFC |
+		HI6553_DISABLE6_XO_CLK_RF1 | HI6553_DISABLE6_XO_CLK_RF2;
+	hi6553_writeb(HI6553_DISABLE6_XO_CLK, data);
+
+	/* configure BUCK0 & BUCK1 */
+	hi6553_writeb(HI6553_BUCK01_CTRL2, 0x5e);
+	hi6553_writeb(HI6553_BUCK0_CTRL7, 0x10);
+	hi6553_writeb(HI6553_BUCK1_CTRL7, 0x10);
+	hi6553_writeb(HI6553_BUCK0_CTRL5, 0x1e);
+	hi6553_writeb(HI6553_BUCK1_CTRL5, 0x1e);
+	hi6553_writeb(HI6553_BUCK0_CTRL1, 0xfc);
+	hi6553_writeb(HI6553_BUCK1_CTRL1, 0xfc);
+
+	/* configure BUCK2 */
+	hi6553_writeb(HI6553_BUCK2_REG1, 0x4f);
+	hi6553_writeb(HI6553_BUCK2_REG5, 0x99);
+	hi6553_writeb(HI6553_BUCK2_REG6, 0x45);
+	mdelay(1);
+	hi6553_writeb(HI6553_VSET_BUCK2_ADJ, 0x22);
+	mdelay(1);
+
+	/* configure BUCK3 */
+	hi6553_writeb(HI6553_BUCK3_REG3, 0x02);
+	hi6553_writeb(HI6553_BUCK3_REG5, 0x99);
+	hi6553_writeb(HI6553_BUCK3_REG6, 0x41);
+	hi6553_writeb(HI6553_VSET_BUCK3_ADJ, 0x02);
+	mdelay(1);
+
+	/* configure BUCK4 */
+	hi6553_writeb(HI6553_BUCK4_REG2, 0x9a);
+	hi6553_writeb(HI6553_BUCK4_REG5, 0x99);
+	hi6553_writeb(HI6553_BUCK4_REG6, 0x45);
+
+	/* configure LDO20 */
+	hi6553_writeb(HI6553_LDO20_REG_ADJ, 0x50);
+
+	hi6553_writeb(HI6553_NP_REG_CHG, 0x0f);
+	hi6553_writeb(HI6553_CLK_TOP0, 0x06);
+	hi6553_writeb(HI6553_CLK_TOP3, 0xc0);
+	hi6553_writeb(HI6553_CLK_TOP4, 0x00);
+
+	/* configure LDO7 & LDO10 for SD slot */
+	data = hi6553_readb(HI6553_LDO7_REG_ADJ);
+	data = (data & 0xf8) | 0x2;
+	hi6553_writeb(HI6553_LDO7_REG_ADJ, data);
+	mdelay(5);
+	/* enable LDO7 */
+	hi6553_writeb(HI6553_ENABLE2_LDO1_8, 1 << 6);
+	mdelay(5);
+	data = hi6553_readb(HI6553_LDO10_REG_ADJ);
+	data = (data & 0xf8) | 0x5;
+	hi6553_writeb(HI6553_LDO10_REG_ADJ, data);
+	mdelay(5);
+	/* enable LDO10 */
+	hi6553_writeb(HI6553_ENABLE3_LDO9_16, 1 << 1);
+	mdelay(5);
+
+	/* select 32.764KHz */
+	hi6553_writeb(HI6553_CLK19M2_600_586_EN, 0x01);
+}
+
+int power_hi6553_init(u8 *base)
+{
+	static const char name[] = "HI6553 PMIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	p->name = name;
+	p->interface = PMIC_NONE;
+	p->number_of_regs = 44;
+	pmussi_base = base;
+
+	hi6553_init();
+
+	puts("HI6553 PMIC init\n");
+
+	return 0;
+}