timer: Add MPC83xx timer driver

Add a timer driver for the MPC83xx architecture.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

3 files changed, 257 insertions, 0 deletions

diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index 5ab6749193..a7d600b6e4 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -140,4 +140,11 @@ config STM32_TIMER
 	  Select this to enable support for the timer found on
 	  STM32 devices.
 
+config MPC83XX_TIMER
+        bool "MPC83xx timer support"
+	depends on TIMER
+	help
+	  Select this to enable support for the timer found on
+	  devices based on the MPC83xx family of SoCs.
+
 endmenu
diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile
index ed482df3e4..7f19c4970a 100644
--- a/drivers/timer/Makefile
+++ b/drivers/timer/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o
 obj-$(CONFIG_ATMEL_PIT_TIMER) += atmel_pit_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence-ttc.o
 obj-$(CONFIG_DESIGNWARE_APB_TIMER)	+= dw-apb-timer.o
+obj-$(CONFIG_MPC83XX_TIMER) += mpc83xx_timer.o
 obj-$(CONFIG_OMAP_TIMER)	+= omap-timer.o
 obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
 obj-$(CONFIG_SANDBOX_TIMER)	+= sandbox_timer.o
diff --git a/drivers/timer/mpc83xx_timer.c b/drivers/timer/mpc83xx_timer.c
new file mode 100644
index 0000000000..84a9ab072a
--- /dev/null
+++ b/drivers/timer/mpc83xx_timer.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018
+ * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
+ */
+
+#include <common.h>
+#include <board.h>
+#include <clk.h>
+#include <dm.h>
+#include <timer.h>
+#include <watchdog.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * struct mpc83xx_timer_priv - Private data structure for MPC83xx timer driver
+ * @decrementer_count: Value to which the decrementer register should be re-set
+ *		       to when a timer interrupt occurs, thus determines the
+ *		       interrupt frequency (value for 1e6/HZ microseconds)
+ * @timestamp:         Counter for the number of timer interrupts that have
+ *		       occurred (i.e. can be used to trigger events
+ *		       periodically in the timer interrupt)
+ */
+struct mpc83xx_timer_priv {
+	uint decrementer_count;
+	ulong timestamp;
+};
+
+/*
+ * Bitmask for enabling the time base in the SPCR (System Priority
+ * Configuration Register)
+ */
+static const u32 SPCR_TBEN_MASK = BIT(31 - 9);
+
+/**
+ * get_dec() - Get the value of the decrementer register
+ *
+ * Return: The value of the decrementer register
+ */
+static inline unsigned long get_dec(void)
+{
+	unsigned long val;
+
+	asm volatile ("mfdec %0" : "=r" (val) : );
+
+	return val;
+}
+
+/**
+ * set_dec() - Set the value of the decrementer register
+ * @val: The value of the decrementer register to be set
+ */
+static inline void set_dec(unsigned long val)
+{
+	if (val)
+		asm volatile ("mtdec %0"::"r" (val));
+}
+
+/**
+ * mftbu() - Get value of TBU (upper time base) register
+ *
+ * Return: Value of the TBU register
+ */
+static inline u32 mftbu(void)
+{
+	u32 rval;
+
+	asm volatile("mftbu %0" : "=r" (rval));
+	return rval;
+}
+
+/**
+ * mftb() - Get value of TBL (lower time base) register
+ *
+ * Return: Value of the TBL register
+ */
+static inline u32 mftb(void)
+{
+	u32 rval;
+
+	asm volatile("mftb %0" : "=r" (rval));
+	return rval;
+}
+
+/*
+ * TODO(mario.six@gdsys.cc): This should really be done by timer_init, and the
+ * interrupt init should go into a interrupt driver.
+ */
+int interrupt_init(void)
+{
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	struct udevice *csb;
+	struct udevice *board;
+	struct udevice *timer;
+	struct mpc83xx_timer_priv *timer_priv;
+	struct clk clock;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_TIMER, &timer);
+	if (ret) {
+		debug("%s: Could not find timer device (error: %d)",
+		      __func__, ret);
+		return ret;
+	}
+
+	timer_priv = dev_get_priv(timer);
+
+	if (board_get(&board)) {
+		debug("%s: board device could not be fetched.\n", __func__);
+		return -ENOENT;
+	}
+
+	ret = uclass_get_device_by_phandle(UCLASS_SIMPLE_BUS, board,
+					   "csb", &csb);
+	if (ret) {
+		debug("%s: Could not retrieve CSB device (error: %d)",
+		      __func__, ret);
+		return ret;
+	}
+
+	ret = clk_get_by_index(csb, 0, &clock);
+	if (ret) {
+		debug("%s: Could not retrieve clock (error: %d)",
+		      __func__, ret);
+		return ret;
+	}
+
+	timer_priv->decrementer_count = (clk_get_rate(&clock) / 4)
+					/ CONFIG_SYS_HZ;
+	/* Enable e300 time base */
+	setbits_be32(&immr->sysconf.spcr, SPCR_TBEN_MASK);
+
+	set_dec(timer_priv->decrementer_count);
+
+	/* Switch on interrupts */
+	set_msr(get_msr() | MSR_EE);
+
+	return 0;
+}
+
+/**
+ * timer_interrupt() - Handler for the timer interrupt
+ * @regs: Array of register values
+ */
+void timer_interrupt(struct pt_regs *regs)
+{
+	struct udevice *timer = gd->timer;
+	struct mpc83xx_timer_priv *priv;
+
+	/*
+	 * During initialization, gd->timer might not be set yet, but the timer
+	 * interrupt may already be enabled. In this case, wait for the
+	 * initialization to complete
+	 */
+	if (!timer)
+		return;
+
+	priv = dev_get_priv(timer);
+
+	/* Restore Decrementer Count */
+	set_dec(priv->decrementer_count);
+
+	priv->timestamp++;
+
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG)
+	if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
+		WATCHDOG_RESET();
+#endif    /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
+
+#ifdef CONFIG_LED_STATUS
+	status_led_tick(priv->timestamp);
+#endif /* CONFIG_LED_STATUS */
+
+#ifdef CONFIG_SHOW_ACTIVITY
+	board_show_activity(priv->timestamp);
+#endif /* CONFIG_SHOW_ACTIVITY */
+}
+
+void wait_ticks(ulong ticks)
+{
+	ulong end = get_ticks() + ticks;
+
+	while (end > get_ticks())
+		WATCHDOG_RESET();
+}
+
+static int mpc83xx_timer_get_count(struct udevice *dev, u64 *count)
+{
+	u32 tbu, tbl;
+
+	/*
+	 * To make sure that no tbl overflow occurred between reading tbl and
+	 * tbu, read tbu again, and compare it with the previously read tbu
+	 * value: If they're different, a tbl overflow has occurred.
+	 */
+	do {
+		tbu = mftbu();
+		tbl = mftb();
+	} while (tbu != mftbu());
+
+	*count = (tbu * 0x10000ULL) + tbl;
+
+	return 0;
+}
+
+static int mpc83xx_timer_probe(struct udevice *dev)
+{
+	struct timer_dev_priv *uc_priv = dev->uclass_priv;
+	struct clk clock;
+	int ret;
+
+	ret = interrupt_init();
+	if (ret) {
+		debug("%s: interrupt_init failed (err = %d)\n",
+		      dev->name, ret);
+		return ret;
+	}
+
+	ret = clk_get_by_index(dev, 0, &clock);
+	if (ret) {
+		debug("%s: Could not retrieve clock (err = %d)\n",
+		      dev->name, ret);
+		return ret;
+	}
+
+	uc_priv->clock_rate = (clk_get_rate(&clock) + 3L) / 4L;
+
+	return 0;
+}
+
+static const struct timer_ops mpc83xx_timer_ops = {
+	.get_count = mpc83xx_timer_get_count,
+};
+
+static const struct udevice_id mpc83xx_timer_ids[] = {
+	{ .compatible = "fsl,mpc83xx-timer" },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(mpc83xx_timer) = {
+	.name	= "mpc83xx_timer",
+	.id	= UCLASS_TIMER,
+	.of_match = mpc83xx_timer_ids,
+	.probe = mpc83xx_timer_probe,
+	.ops	= &mpc83xx_timer_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+	.priv_auto_alloc_size = sizeof(struct mpc83xx_timer_priv),
+};