summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorpekon gupta <pekon@ti.com>2013-11-19 11:02:17 +0530
committerScott Wood <scottwood@freescale.com>2014-03-03 20:09:03 -0600
commit6e562b1106ea6afc78752f50925e87e9dd14f8b4 (patch)
tree057186dc5fb6d74e9721ba9fbd3f13dd77ec4ba1 /drivers/mtd/nand
parent71a7f95600eeea03100af66e2f11498048f32cfe (diff)
downloadu-boot-6e562b1106ea6afc78752f50925e87e9dd14f8b4.tar.gz
u-boot-6e562b1106ea6afc78752f50925e87e9dd14f8b4.tar.xz
u-boot-6e562b1106ea6afc78752f50925e87e9dd14f8b4.zip
mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes
chip->ecc.correct() is used for detecting and correcting bit-flips during read operations. In omap-nand driver it implemented as: (a) omap_correct_data(): for h/w based ECC_HAM1 scheme (b) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW for ECC_BCH8 scheme using GPMC and software lib/bch.c (c) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW for ECC_BCH8 scheme using GPMC and ELM This patch updates (c) - checks for calc_ecc[]==0x00 so that error_correction is not required for known good pages. - adds scalability for other ECC_BCHx scheme by merging following omap_rotate_ecc_bch() + omap_fix_errors_bch() => omap_correct_data_bch() - fixing logic for bit-flip correction based on error_loc[count] Signed-off-by: Pekon Gupta <pekon@ti.com>
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/omap_gpmc.c161
1 files changed, 71 insertions, 90 deletions
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index ad5b0f17cc..441b32144f 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -21,6 +21,9 @@
#define SECTOR_BYTES 512
#define ECCCLEAR (0x1 << 8)
#define ECCRESULTREG1 (0x1 << 0)
+/* 4 bit padding to make byte aligned, 56 = 52 + 4 */
+#define BCH4_BIT_PAD 4
+
#ifdef CONFIG_BCH
static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
0x97, 0x79, 0xe5, 0x24, 0xb5};
@@ -179,6 +182,23 @@ static __maybe_unused struct nand_bch_priv bch_priv = {
};
/*
+ * omap_reverse_list - re-orders list elements in reverse order [internal]
+ * @list: pointer to start of list
+ * @length: length of list
+*/
+void omap_reverse_list(u8 *list, unsigned int length)
+{
+ unsigned int i, j;
+ unsigned int half_length = length / 2;
+ u8 tmp;
+ for (i = 0, j = length - 1; i < half_length; i++, j--) {
+ tmp = list[i];
+ list[i] = list[j];
+ list[j] = tmp;
+ }
+}
+
+/*
* omap_enable_hwecc - configures GPMC as per ECC scheme before read/write
* @mtd: MTD device structure
* @mode: Read/Write mode
@@ -312,77 +332,6 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
#ifdef CONFIG_NAND_OMAP_ELM
/*
- * omap_rotate_ecc_bch - Rotate the syndrome bytes
- *
- * @mtd: MTD device structure
- * @calc_ecc: ECC read from ECC registers
- * @syndrome: Rotated syndrome will be retuned in this array
- *
- */
-static void omap_rotate_ecc_bch(struct mtd_info *mtd, uint8_t *calc_ecc,
- uint8_t *syndrome)
-{
- struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *bch = chip->priv;
- uint8_t n_bytes = 0;
- int8_t i, j;
-
- switch (bch->type) {
- case ECC_BCH4:
- n_bytes = 8;
- break;
-
- case ECC_BCH16:
- n_bytes = 28;
- break;
-
- case ECC_BCH8:
- default:
- n_bytes = 13;
- break;
- }
-
- for (i = 0, j = (n_bytes-1); i < n_bytes; i++, j--)
- syndrome[i] = calc_ecc[j];
-}
-
-/*
- * omap_fix_errors_bch - Correct bch error in the data
- *
- * @mtd: MTD device structure
- * @data: Data read from flash
- * @error_count:Number of errors in data
- * @error_loc: Locations of errors in the data
- *
- */
-static void omap_fix_errors_bch(struct mtd_info *mtd, uint8_t *data,
- uint32_t error_count, uint32_t *error_loc)
-{
- struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *bch = chip->priv;
- uint8_t count = 0;
- uint32_t error_byte_pos;
- uint32_t error_bit_mask;
- uint32_t last_bit = (bch->nibbles * 4) - 1;
-
- /* Flip all bits as specified by the error location array. */
- /* FOR( each found error location flip the bit ) */
- for (count = 0; count < error_count; count++) {
- if (error_loc[count] > last_bit) {
- /* Remove the ECC spare bits from correction. */
- error_loc[count] -= (last_bit + 1);
- /* Offset bit in data region */
- error_byte_pos = ((512 * 8) -
- (error_loc[count]) - 1) / 8;
- /* Error Bit mask */
- error_bit_mask = 0x1 << (error_loc[count] % 8);
- /* Toggle the error bit to make the correction. */
- data[error_byte_pos] ^= error_bit_mask;
- }
- }
-}
-
-/*
* omap_correct_data_bch - Compares the ecc read from nand spare area
* with ECC registers values and corrects one bit error if it has occured
*
@@ -398,40 +347,72 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
{
struct nand_chip *chip = mtd->priv;
struct nand_bch_priv *bch = chip->priv;
- uint8_t syndrome[28];
- uint32_t error_count = 0;
+ uint32_t eccbytes = chip->ecc.bytes;
+ uint32_t error_count = 0, error_max;
uint32_t error_loc[8];
- uint32_t i, ecc_flag;
+ uint32_t i, ecc_flag = 0;
+ uint8_t count, err = 0;
+ uint32_t byte_pos, bit_pos;
+ /* check calculated ecc */
+ for (i = 0; i < chip->ecc.bytes && !ecc_flag; i++) {
+ if (calc_ecc[i] != 0x00)
+ ecc_flag = 1;
+ }
+ if (!ecc_flag)
+ return 0;
+
+ /* check for whether its a erased-page */
ecc_flag = 0;
- for (i = 0; i < chip->ecc.bytes; i++)
+ for (i = 0; i < chip->ecc.bytes && !ecc_flag; i++) {
if (read_ecc[i] != 0xff)
ecc_flag = 1;
-
+ }
if (!ecc_flag)
return 0;
- elm_reset();
- elm_config((enum bch_level)(bch->type));
-
/*
* while reading ECC result we read it in big endian.
* Hence while loading to ELM we have rotate to get the right endian.
*/
- omap_rotate_ecc_bch(mtd, calc_ecc, syndrome);
-
+ switch (bch->ecc_scheme) {
+ case OMAP_ECC_BCH8_CODE_HW:
+ omap_reverse_list(calc_ecc, eccbytes - 1);
+ break;
+ default:
+ return -EINVAL;
+ }
/* use elm module to check for errors */
- if (elm_check_error(syndrome, bch->nibbles, &error_count,
- error_loc) != 0) {
- printf("ECC: uncorrectable.\n");
- return -1;
+ elm_config((enum bch_level)(bch->type));
+ if (elm_check_error(calc_ecc, bch->nibbles, &error_count, error_loc)) {
+ printf("nand: error: uncorrectable ECC errors\n");
+ return -EINVAL;
}
-
/* correct bch error */
- if (error_count > 0)
- omap_fix_errors_bch(mtd, dat, error_count, error_loc);
-
- return 0;
+ for (count = 0; count < error_count; count++) {
+ switch (bch->type) {
+ case ECC_BCH8:
+ /* 14th byte in ECC is reserved to match ROM layout */
+ error_max = SECTOR_BYTES + (eccbytes - 1);
+ break;
+ default:
+ return -EINVAL;
+ }
+ byte_pos = error_max - (error_loc[count] / 8) - 1;
+ bit_pos = error_loc[count] % 8;
+ if (byte_pos < SECTOR_BYTES) {
+ dat[byte_pos] ^= 1 << bit_pos;
+ printf("nand: bit-flip corrected @data=%d\n", byte_pos);
+ } else if (byte_pos < error_max) {
+ read_ecc[byte_pos - SECTOR_BYTES] = 1 << bit_pos;
+ printf("nand: bit-flip corrected @oob=%d\n", byte_pos -
+ SECTOR_BYTES);
+ } else {
+ err = -EBADMSG;
+ printf("nand: error: invalid bit-flip location\n");
+ }
+ }
+ return (err) ? err : error_count;
}
/**