drivers: i2c: delete an unused source file

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 387 deletions

diff --git a/drivers/i2c/adi_i2c.c b/drivers/i2c/adi_i2c.c
deleted file mode 100644
index 675f4171ce..0000000000
--- a/drivers/i2c/adi_i2c.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * i2c.c - driver for ADI TWI/I2C
- *
- * Copyright (c) 2006-2013 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <i2c.h>
-
-#include <asm/clock.h>
-#include <asm/twi.h>
-#include <asm/io.h>
-
-/* Every register is 32bit aligned, but only 16bits in size */
-#define ureg(name) u16 name; u16 __pad_##name;
-struct twi_regs {
-	ureg(clkdiv);
-	ureg(control);
-	ureg(slave_ctl);
-	ureg(slave_stat);
-	ureg(slave_addr);
-	ureg(master_ctl);
-	ureg(master_stat);
-	ureg(master_addr);
-	ureg(int_stat);
-	ureg(int_mask);
-	ureg(fifo_ctl);
-	ureg(fifo_stat);
-	char __pad[0x50];
-	ureg(xmt_data8);
-	ureg(xmt_data16);
-	ureg(rcv_data8);
-	ureg(rcv_data16);
-};
-#undef ureg
-
-/* U-Boot I2C framework allows only one active device at a time.  */
-#ifdef TWI_CLKDIV
-#define TWI0_CLKDIV TWI_CLKDIV
-#endif
-static struct twi_regs *twi = (void *)TWI0_CLKDIV;
-
-#ifdef DEBUG
-# define dmemset(s, c, n) memset(s, c, n)
-#else
-# define dmemset(s, c, n)
-#endif
-#define debugi(fmt, args...) \
-	debug( \
-		"MSTAT:0x%03x FSTAT:0x%x ISTAT:0x%02x\t%-20s:%-3i: " fmt "\n", \
-		twi->master_stat, twi->fifo_stat, twi->int_stat, \
-		__func__, __LINE__, ## args)
-
-#ifdef CONFIG_TWICLK_KHZ
-# error do not define CONFIG_TWICLK_KHZ ... use CONFIG_SYS_I2C_SPEED
-#endif
-
-/*
- * The way speed is changed into duty often results in integer truncation
- * with 50% duty, so we'll force rounding up to the next duty by adding 1
- * to the max.  In practice this will get us a speed of something like
- * 385 KHz.  The other limit is easy to handle as it is only 8 bits.
- */
-#define I2C_SPEED_MAX             400000
-#define I2C_SPEED_TO_DUTY(speed)  (5000000 / (speed))
-#define I2C_DUTY_MAX              (I2C_SPEED_TO_DUTY(I2C_SPEED_MAX) + 1)
-#define I2C_DUTY_MIN              0xff	/* 8 bit limited */
-#define SYS_I2C_DUTY              I2C_SPEED_TO_DUTY(CONFIG_SYS_I2C_SPEED)
-/* Note: duty is inverse of speed, so the comparisons below are correct */
-#if SYS_I2C_DUTY < I2C_DUTY_MAX || SYS_I2C_DUTY > I2C_DUTY_MIN
-# error "The Blackfin I2C hardware can only operate 20KHz - 400KHz"
-#endif
-
-/* All transfers are described by this data structure */
-struct i2c_msg {
-	u8 flags;
-#define I2C_M_COMBO		0x4
-#define I2C_M_STOP		0x2
-#define I2C_M_READ		0x1
-	int len;		/* msg length */
-	u8 *buf;		/* pointer to msg data */
-	int alen;		/* addr length */
-	u8 *abuf;		/* addr buffer */
-};
-
-/* Allow msec timeout per ~byte transfer */
-#define I2C_TIMEOUT 10
-
-/**
- * wait_for_completion - manage the actual i2c transfer
- *	@msg: the i2c msg
- */
-static int wait_for_completion(struct i2c_msg *msg)
-{
-	u16 int_stat, ctl;
-	ulong timebase = get_timer(0);
-
-	do {
-		int_stat = readw(&twi->int_stat);
-
-		if (int_stat & XMTSERV) {
-			debugi("processing XMTSERV");
-			writew(XMTSERV, &twi->int_stat);
-			if (msg->alen) {
-				writew(*(msg->abuf++), &twi->xmt_data8);
-				--msg->alen;
-			} else if (!(msg->flags & I2C_M_COMBO) && msg->len) {
-				writew(*(msg->buf++), &twi->xmt_data8);
-				--msg->len;
-			} else {
-				ctl = readw(&twi->master_ctl);
-				if (msg->flags & I2C_M_COMBO)
-					writew(ctl | RSTART | MDIR,
-							&twi->master_ctl);
-				else
-					writew(ctl | STOP, &twi->master_ctl);
-			}
-		}
-		if (int_stat & RCVSERV) {
-			debugi("processing RCVSERV");
-			writew(RCVSERV, &twi->int_stat);
-			if (msg->len) {
-				*(msg->buf++) = readw(&twi->rcv_data8);
-				--msg->len;
-			} else if (msg->flags & I2C_M_STOP) {
-				ctl = readw(&twi->master_ctl);
-				writew(ctl | STOP, &twi->master_ctl);
-			}
-		}
-		if (int_stat & MERR) {
-			debugi("processing MERR");
-			writew(MERR, &twi->int_stat);
-			return msg->len;
-		}
-		if (int_stat & MCOMP) {
-			debugi("processing MCOMP");
-			writew(MCOMP, &twi->int_stat);
-			if (msg->flags & I2C_M_COMBO && msg->len) {
-				ctl = readw(&twi->master_ctl);
-				ctl = (ctl & ~RSTART) |
-					(min(msg->len, 0xff) << 6) | MEN | MDIR;
-				writew(ctl, &twi->master_ctl);
-			} else
-				break;
-		}
-
-		/* If we were able to do something, reset timeout */
-		if (int_stat)
-			timebase = get_timer(0);
-
-	} while (get_timer(timebase) < I2C_TIMEOUT);
-
-	return msg->len;
-}
-
-/**
- * i2c_transfer - setup an i2c transfer
- *	@return: 0 if things worked, non-0 if things failed
- *
- *	Here we just get the i2c stuff all prepped and ready, and then tail off
- *	into wait_for_completion() for all the bits to go.
- */
-static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
-			int len, u8 flags)
-{
-	int ret;
-	u16 ctl;
-	uchar addr_buffer[] = {
-		(addr >>  0),
-		(addr >>  8),
-		(addr >> 16),
-	};
-	struct i2c_msg msg = {
-		.flags = flags | (len >= 0xff ? I2C_M_STOP : 0),
-		.buf   = buffer,
-		.len   = len,
-		.abuf  = addr_buffer,
-		.alen  = alen,
-	};
-
-	dmemset(buffer, 0xff, len);
-	debugi("chip=0x%x addr=0x%02x alen=%i buf[0]=0x%02x len=%i ",
-		chip, addr, alen, buffer[0], len);
-	debugi("flags=0x%02x[%s] ", flags,
-		(flags & I2C_M_READ ? "rd" : "wr"));
-
-	/* wait for things to settle */
-	while (readw(&twi->master_stat) & BUSBUSY)
-		if (ctrlc())
-			return 1;
-
-	/* Set Transmit device address */
-	writew(chip, &twi->master_addr);
-
-	/* Clear the FIFO before starting things */
-	writew(XMTFLUSH | RCVFLUSH, &twi->fifo_ctl);
-	writew(0, &twi->fifo_ctl);
-
-	/* prime the pump */
-	if (msg.alen) {
-		len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len;
-		debugi("first byte=0x%02x", *msg.abuf);
-		writew(*(msg.abuf++), &twi->xmt_data8);
-		--msg.alen;
-	} else if (!(msg.flags & I2C_M_READ) && msg.len) {
-		debugi("first byte=0x%02x", *msg.buf);
-		writew(*(msg.buf++), &twi->xmt_data8);
-		--msg.len;
-	}
-
-	/* clear int stat */
-	writew(-1, &twi->master_stat);
-	writew(-1, &twi->int_stat);
-	writew(0, &twi->int_mask);
-
-	/* Master enable */
-	ctl = readw(&twi->master_ctl);
-	ctl = (ctl & FAST) | (min(len, 0xff) << 6) | MEN |
-		((msg.flags & I2C_M_READ) ? MDIR : 0);
-	writew(ctl, &twi->master_ctl);
-
-	/* process the rest */
-	ret = wait_for_completion(&msg);
-	debugi("ret=%d", ret);
-
-	if (ret) {
-		ctl = readw(&twi->master_ctl) & ~MEN;
-		writew(ctl, &twi->master_ctl);
-		ctl = readw(&twi->control) & ~TWI_ENA;
-		writew(ctl, &twi->control);
-		ctl = readw(&twi->control) | TWI_ENA;
-		writew(ctl, &twi->control);
-	}
-
-	return ret;
-}
-
-/**
- * i2c_set_bus_speed - set i2c bus speed
- *	@speed: bus speed (in HZ)
- */
-int i2c_set_bus_speed(unsigned int speed)
-{
-	u16 clkdiv = I2C_SPEED_TO_DUTY(speed);
-
-	/* Set TWI interface clock */
-	if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN)
-		return -1;
-	clkdiv = (clkdiv << 8) | (clkdiv & 0xff);
-	writew(clkdiv, &twi->clkdiv);
-
-	/* Don't turn it on */
-	writew(speed > 100000 ? FAST : 0, &twi->master_ctl);
-
-	return 0;
-}
-
-/**
- * i2c_get_bus_speed - get i2c bus speed
- *	@speed: bus speed (in HZ)
- */
-unsigned int i2c_get_bus_speed(void)
-{
-	u16 clkdiv = readw(&twi->clkdiv) & 0xff;
-	/* 10 MHz / (2 * CLKDIV) -> 5 MHz / CLKDIV */
-	return 5000000 / clkdiv;
-}
-
-/**
- * i2c_init - initialize the i2c bus
- *	@speed: bus speed (in HZ)
- *	@slaveaddr: address of device in slave mode (0 - not slave)
- *
- *	Slave mode isn't actually implemented.  It'll stay that way until
- *	we get a real request for it.
- */
-void i2c_init(int speed, int slaveaddr)
-{
-	u16 prescale = ((get_i2c_clk() / 1000 / 1000 + 5) / 10) & 0x7F;
-
-	/* Set TWI internal clock as 10MHz */
-	writew(prescale, &twi->control);
-
-	/* Set TWI interface clock as specified */
-	i2c_set_bus_speed(speed);
-
-	/* Enable it */
-	writew(TWI_ENA | prescale, &twi->control);
-
-	debugi("CONTROL:0x%04x CLKDIV:0x%04x", readw(&twi->control),
-		readw(&twi->clkdiv));
-
-#if CONFIG_SYS_I2C_SLAVE
-# error I2C slave support not tested/supported
-#endif
-}
-
-/**
- * i2c_probe - test if a chip exists at a given i2c address
- *	@chip: i2c chip addr to search for
- *	@return: 0 if found, non-0 if not found
- */
-int i2c_probe(uchar chip)
-{
-	u8 byte;
-	return i2c_read(chip, 0, 0, &byte, 1);
-}
-
-/**
- * i2c_read - read data from an i2c device
- *	@chip: i2c chip addr
- *	@addr: memory (register) address in the chip
- *	@alen: byte size of address
- *	@buffer: buffer to store data read from chip
- *	@len: how many bytes to read
- *	@return: 0 on success, non-0 on failure
- */
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
-	return i2c_transfer(chip, addr, alen, buffer,
-			len, (alen ? I2C_M_COMBO : I2C_M_READ));
-}
-
-/**
- * i2c_write - write data to an i2c device
- *	@chip: i2c chip addr
- *	@addr: memory (register) address in the chip
- *	@alen: byte size of address
- *	@buffer: buffer holding data to write to chip
- *	@len: how many bytes to write
- *	@return: 0 on success, non-0 on failure
- */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
-	return i2c_transfer(chip, addr, alen, buffer, len, 0);
-}
-
-/**
- * i2c_set_bus_num - change active I2C bus
- *	@bus: bus index, zero based
- *	@returns: 0 on success, non-0 on failure
- */
-int i2c_set_bus_num(unsigned int bus)
-{
-	switch (bus) {
-#if CONFIG_SYS_MAX_I2C_BUS > 0
-	case 0:
-		twi = (void *)TWI0_CLKDIV;
-		return 0;
-#endif
-#if CONFIG_SYS_MAX_I2C_BUS > 1
-	case 1:
-		twi = (void *)TWI1_CLKDIV;
-		return 0;
-#endif
-#if CONFIG_SYS_MAX_I2C_BUS > 2
-	case 2:
-		twi = (void *)TWI2_CLKDIV;
-		return 0;
-#endif
-	default: return -1;
-	}
-}
-
-/**
- * i2c_get_bus_num - returns index of active I2C bus
- */
-unsigned int i2c_get_bus_num(void)
-{
-	switch ((unsigned long)twi) {
-#if CONFIG_SYS_MAX_I2C_BUS > 0
-	case TWI0_CLKDIV:
-		return 0;
-#endif
-#if CONFIG_SYS_MAX_I2C_BUS > 1
-	case TWI1_CLKDIV:
-		return 1;
-#endif
-#if CONFIG_SYS_MAX_I2C_BUS > 2
-	case TWI2_CLKDIV:
-		return 2;
-#endif
-	default: return -1;
-	}
-}