diff options
| author | Lokesh Vutla <lokeshvutla@ti.com> | 2021-05-06 16:44:59 +0530 |
|---|---|---|
| committer | Lokesh Vutla <lokeshvutla@ti.com> | 2021-05-12 16:36:38 +0530 |
| commit | c88a9ae1fea9d5f4c69b69b13fb0556d22b16443 (patch) | |
| tree | b080ba9b1bbb4cc5184e10a219422cbf419c1a61 /drivers/ddr/imx/imx8m/ddr_init.c | |
| parent | 45b7a9fc08778b7063ce50301d3ccdd8a7c2a9b5 (diff) | |
| download | u-boot-c88a9ae1fea9d5f4c69b69b13fb0556d22b16443.tar.gz u-boot-c88a9ae1fea9d5f4c69b69b13fb0556d22b16443.tar.xz u-boot-c88a9ae1fea9d5f4c69b69b13fb0556d22b16443.zip | |
arm: dts: am642-sk: Add initial sk dts
AM642 StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM642 SoC. It supports the following interfaces:
* 2 GB LPDDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in switch and MAC mode
* x1 USB 3.0 Type-A port
* x1 UHS-1 capable µSD card slot
* 2.4/5 GHz WLAN + Bluetooth 4.2 through WL1837
* 512 Mbit OSPI flash
* x2 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin Raspberry Pi compatible GPIO header
* 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO)
* 54-pin header for Programmable Realtime Unit (PRU) IO pins
* Interface for remote automation. Includes:
* power measurement and reset control
* boot mode change
Add basic support for AM642 SK.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'drivers/ddr/imx/imx8m/ddr_init.c')
0 files changed, 0 insertions, 0 deletions