summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
authorAndrew F. Davis <afd@ti.com>2016-08-30 14:06:22 -0500
committerTom Rini <trini@konsulko.com>2016-10-02 08:09:59 -0400
commitf7160eac83f86a0fc7bd3b4a2b52520ad71e4d2b (patch)
tree49eb08a00fe6428fecf0706bb3d782c3494ae517 /doc
parent9eda25181dd102ffe68a65e7b8de62f9c6369208 (diff)
downloadu-boot-f7160eac83f86a0fc7bd3b4a2b52520ad71e4d2b.tar.gz
u-boot-f7160eac83f86a0fc7bd3b4a2b52520ad71e4d2b.tar.xz
u-boot-f7160eac83f86a0fc7bd3b4a2b52520ad71e4d2b.zip
doc: Update info on using AM33xx secure devices from TI
Add a section describing the additional boot types used on AM33xx secure devices. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.ti-secure32
1 files changed, 32 insertions, 0 deletions
diff --git a/doc/README.ti-secure b/doc/README.ti-secure
index 54c996d8f6..9b0fbf9732 100644
--- a/doc/README.ti-secure
+++ b/doc/README.ti-secure
@@ -43,6 +43,38 @@ Booting of U-Boot SPL
The script is basically the only required interface to the TI SECDEV
package for creating a bootable SPL image for secure TI devices.
+ Invoking the script for AM33xx Secure Devices
+ =============================================
+
+ create-boot-image.sh \
+ <IMAGE_FLAG> <INPUT_FILE> <OUTPUT_FILE> <SPL_LOAD_ADDR>
+
+ <IMAGE_FLAG> is a value that specifies the type of the image to
+ generate OR the action the image generation tool will take. Valid
+ values are:
+ SPI_X-LOADER - Generates an image for SPI flash (byte swapped)
+ X-LOADER - Generates an image for non-XIP flash
+ MLO - Generates an image for SD/MMC/eMMC media
+ 2ND - Generates an image for USB, UART and Ethernet
+ XIP_X-LOADER - Generates a single stage u-boot for NOR/QSPI XiP
+
+ <INPUT_FILE> is the full path and filename of the public world boot
+ loaderbinary file (depending on the boot media, this is usually
+ either u-boot-spl.bin or u-boot.bin).
+
+ <OUTPUT_FILE> is the full path and filename of the final secure
+ image. The output binary images should be used in place of the standard
+ non-secure binary images (see the platform-specific user's guides and
+ releases notes for how the non-secure images are typically used)
+ u-boot-spl_HS_SPI_X-LOADER - byte swapped boot image for SPI flash
+ u-boot-spl_HS_X-LOADER - boot image for NAND or SD/MMC/eMMC rawmode
+ u-boot-spl_HS_MLO - boot image for SD/MMC/eMMC media
+ u-boot-spl_HS_2ND - boot image for USB, UART and Ethernet
+ u-boot_HS_XIP_X-LOADER - boot image for NOR or QSPI Xip flash
+
+ <SPL_LOAD_ADDR> is the address at which SOC ROM should load the
+ <INPUT_FILE>
+
Invoking the script for AM43xx Secure Devices
=============================================