diff options
| author | Christophe Kerello <christophe.kerello@st.com> | 2019-04-05 11:41:49 +0200 |
|---|---|---|
| committer | Patrick Delaunay <patrick.delaunay@st.com> | 2019-04-12 16:09:13 +0200 |
| commit | 6899385f41ee43170c82dddc814323d2e2901a22 (patch) | |
| tree | 558526dff944913fe725752a5dacb8be90c42a5c /doc | |
| parent | 321d15323856f3f3b8f021abe98178c4285054d6 (diff) | |
| download | u-boot-6899385f41ee43170c82dddc814323d2e2901a22.tar.gz u-boot-6899385f41ee43170c82dddc814323d2e2901a22.tar.xz u-boot-6899385f41ee43170c82dddc814323d2e2901a22.zip | |
dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
This patch adds the documentation of the device tree bindings for the STM32
FMC2 NAND controller.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt | 59 |
1 files changed, 59 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt b/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt new file mode 100644 index 0000000000..70e76be2a3 --- /dev/null +++ b/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt @@ -0,0 +1,59 @@ +STMicroelectronics Flexible Memory Controller 2 (FMC2) +NAND Interface + +Required properties: +- compatible: Should be one of: + * st,stm32mp15-fmc2 +- reg: NAND flash controller memory areas. + First region contains the register location. + Regions 2 to 4 respectively contain the data, command, + and address space for CS0. + Regions 5 to 7 contain the same areas for CS1. +- interrupts: The interrupt number +- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt) +- clocks: The clock needed by the NAND flash controller + +Optional properties: +- resets: Reference to a reset controller asserting the FMC controller +- dmas: DMA specifiers (see: dma/stm32-mdma.txt) +- dma-names: Must be "tx", "rx" and "ecc" + +Optional children nodes: +Children nodes represent the available NAND chips. + +Optional properties: +- nand-on-flash-bbt: see nand.txt +- nand-ecc-strength: see nand.txt +- nand-ecc-step-size: see nand.txt + +The following ECC strength and step size are currently supported: + - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming) + - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4) + - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default) + +Example: + + fmc: nand-controller@58002000 { + compatible = "st,stm32mp15-fmc2"; + reg = <0x58002000 0x1000>, + <0x80000000 0x1000>, + <0x88010000 0x1000>, + <0x88020000 0x1000>, + <0x81000000 0x1000>, + <0x89010000 0x1000>, + <0x89020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + pinctrl-names = "default"; + pinctrl-0 = <&fmc_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; + }; |