x86: baytrail: Configure FSP UPD from device tree

Allow for configuration of FSP UPD from the device tree which will
override any settings which the FSP was built with itself.

Modify the MinnowMax and BayleyBay boards to transfer sensible UPD
settings from the Intel FSPv4 Gold release to the respective dts files,
with the condition that the memory-down parameters for MinnowMax are
also used.

Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Removed fsp,mrc-debug-msg and fsp,enable-xhci for minnowmax, bayleybay
Fixed lines >80col
Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 158 insertions, 0 deletions

diff --git a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
new file mode 100644
index 0000000000..b44b5b5431
--- /dev/null
+++ b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
@@ -0,0 +1,158 @@
+Intel Bay Trail FSP UPD Binding
+===============================
+
+The device tree node which describes the overriding of the Intel Bay Trail FSP
+UPD data for configuring the SoC.
+
+All properties can be found within the `upd-region` struct in
+arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h, under the same names, and in
+Intel's FSP Binary Configuration Tool for Bay Trail.  This list of properties is
+matched up to Intel's E3800 FSPv4 release.
+
+# Boolean properties:
+
+- fsp,enable-sdio
+- fsp,enable-sdcard
+- fsp,enable-hsuart0
+- fsp,enable-hsuart1
+- fsp,enable-spi
+- fsp,enable-sata
+- fsp,enable-azalia
+- fsp,enable-xhci
+- fsp,enable-lpe
+- fsp,lpss-sio-enable-pci-mode
+- fsp,enable-dma0
+- fsp,enable-dma1
+- fsp,enable-i2-c0
+- fsp,enable-i2-c1
+- fsp,enable-i2-c2
+- fsp,enable-i2-c3
+- fsp,enable-i2-c4
+- fsp,enable-i2-c5
+- fsp,enable-i2-c6
+- fsp,enable-pwm0
+- fsp,enable-pwm1
+- fsp,enable-hsi
+- fsp,mrc-debug-msg
+- fsp,isp-enable
+- fsp,scc-enable-pci-mode
+- fsp,igd-render-standby
+- fsp,txe-uma-enable
+- fsp,emmc45-ddr50-enabled
+- fsp,emmc45-hs200-enabled
+- fsp,enable-igd
+- fsp,enable-memory-down
+
+If you set "fsp,enable-memory-down" you are strongly encouraged to provide an
+"fsp,memory-down-params{};" to specify how your memory is configured.  If you do
+not set "fsp,enable-memory-down", then the DIMM SPD information will be
+discovered by the FSP and used to setup main memory.
+
+
+# Integer properties:
+
+- fsp,mrc-init-tseg-size
+- fsp,mrc-init-mmio-size
+- fsp,mrc-init-spd-addr1
+- fsp,mrc-init-spd-addr2
+- fsp,emmc-boot-mode
+- fsp,sata-mode
+- fsp,igd-dvmt50-pre-alloc
+- fsp,aperture-size
+- fsp,gtt-size
+- fsp,serial-debug-port-address
+- fsp,serial-debug-port-type
+- fsp,os-selection
+- fsp,emmc45-retune-timer-value
+
+- fsp,memory-down-params {
+
+	# Boolean properties:
+
+	- fsp,dimm-0-enable
+	- fsp,dimm-1-enable
+
+	# Integer properties:
+
+	- fsp,dram-speed
+	- fsp,dram-type
+	- fsp,dimm-width
+	- fsp,dimm-density
+	- fsp,dimm-bus-width
+	- fsp,dimm-sides
+	- fsp,dimm-tcl
+	- fsp,dimm-trpt-rcd
+	- fsp,dimm-twr
+	- fsp,dimm-twtr
+	- fsp,dimm-trrd
+	- fsp,dimm-trtp
+	- fsp,dimm-tfaw
+};
+
+
+Example (from MinnowMax Dual Core):
+-----------------------------------
+
+/ {
+	...
+
+	fsp {
+		compatible = "intel,baytrail-fsp";
+		fsp,mrc-init-tseg-size = <0>;
+		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-spd-addr1 = <0xa0>;
+		fsp,mrc-init-spd-addr2 = <0xa2>;
+		fsp,emmc-boot-mode = <2>;
+		fsp,enable-sdio;
+		fsp,enable-sdcard;
+		fsp,enable-hsuart1;
+		fsp,enable-spi;
+		fsp,enable-sata;
+		fsp,sata-mode = <1>;
+		fsp,enable-xhci;
+		fsp,enable-lpe;
+		fsp,lpss-sio-enable-pci-mode;
+		fsp,enable-dma0;
+		fsp,enable-dma1;
+		fsp,enable-i2c0;
+		fsp,enable-i2c1;
+		fsp,enable-i2c2;
+		fsp,enable-i2c3;
+		fsp,enable-i2c4;
+		fsp,enable-i2c5;
+		fsp,enable-i2c6;
+		fsp,enable-pwm0;
+		fsp,enable-pwm1;
+		fsp,igd-dvmt50-pre-alloc = <2>;
+		fsp,aperture-size = <2>;
+		fsp,gtt-size = <2>;
+		fsp,serial-debug-port-address = <0x3f8>;
+		fsp,serial-debug-port-type = <1>;
+		fsp,mrc-debug-msg;
+		fsp,scc-enable-pci-mode;
+		fsp,os-selection = <4>;
+		fsp,emmc45-ddr50-enabled;
+		fsp,emmc45-retune-timer-value = <8>;
+		fsp,enable-igd;
+		fsp,enable-memory-down;
+		fsp,memory-down-params {
+			compatible = "intel,baytrail-fsp-mdp";
+			fsp,dram-speed = <1>;
+			fsp,dram-type = <1>;
+			fsp,dimm-0-enable;
+			fsp,dimm-width = <1>;
+			fsp,dimm-density = <2>;
+			fsp,dimm-bus-width = <3>;
+			fsp,dimm-sides = <0>;
+			fsp,dimm-tcl = <0xb>;
+			fsp,dimm-trpt-rcd = <0xb>;
+			fsp,dimm-twr = <0xc>;
+			fsp,dimm-twtr = <6>;
+			fsp,dimm-trrd = <6>;
+			fsp,dimm-trtp = <6>;
+			fsp,dimm-tfaw = <0x14>;
+		};
+	};
+
+	...
+};