Coding Style cleanup; update CHANGELOG, prepare -rc1v2009.11-rc1

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 9 insertions, 9 deletions

diff --git a/doc/README.bitbangMII b/doc/README.bitbangMII
index edd085630f..0a2fa48a56 100644
--- a/doc/README.bitbangMII
+++ b/doc/README.bitbangMII
@@ -6,7 +6,7 @@ buses are implemented via bit-banging mode.
 The driver requires that the following macros should be defined into the board
 configuration file:
 
-CONFIG_BITBANGMII       - Enable the miiphybb driver
+CONFIG_BITBANGMII	- Enable the miiphybb driver
 CONFIG_BITBANGMII_MULTI - Enable the multi bus support
 
 If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs
@@ -19,7 +19,7 @@ MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin
 MDIO_READ     - Read the MDIO pin
 MDIO(v)       - Write v on the MDIO pin
 MDC_DECLARE   - Declaration needed to access to the MDC pin (optional)
-MDC(v)        - Write v on the MDC pin
+MDC(v)	      - Write v on the MDC pin
 
 The previous macros make the driver compatible with the previous version
 (that didn't support the multi-bus).
@@ -30,17 +30,17 @@ the bb_miiphy_buses_num variable with the number of mii buses.
 The record (struct bb_miiphy_bus) has the following fields/callbacks (see
 miiphy.h for details):
 
-char name[]            - The symbolic name that must be equal to the MII bus
-                         registered name
-int (*init)()          - Initialization function called at startup time (just
-                         before the Ethernet initialization)
+char name[]	       - The symbolic name that must be equal to the MII bus
+			 registered name
+int (*init)()	       - Initialization function called at startup time (just
+			 before the Ethernet initialization)
 int (*mdio_active)()   - Activate the MDIO pin as output
 int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin
 int (*set_mdio)()      - Write the MDIO pin
 int (*get_mdio)()      - Read the MDIO pin
 int (*set_mdc)()       - Write the MDC pin
-int (*delay)()         - Delay function
-void *priv             - Private data used by board specific code
+int (*delay)()	       - Delay function
+void *priv	       - Private data used by board specific code
 
 The board code will look like:
 
@@ -50,7 +50,7 @@ struct bb_miiphy_bus bb_miiphy_buses[] = {
  ...
 };
 int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
-                          sizeof(bb_miiphy_buses[0]);
+			  sizeof(bb_miiphy_buses[0]);
 
 2009 Industrie Dial Face S.p.A.
      Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>