diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2015-08-14 16:13:03 +0200 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2015-08-31 08:43:41 +0200 |
| commit | f9a37289b83100cf9c75114283c1216c1149386c (patch) | |
| tree | 727314b687e043eac891ab2b0ba4ba6f956ec3a8 /configs | |
| parent | 7a0bbe64d8ec87e07179fe6124dc8a177b5abd3e (diff) | |
| download | u-boot-f9a37289b83100cf9c75114283c1216c1149386c.tar.gz u-boot-f9a37289b83100cf9c75114283c1216c1149386c.tar.xz u-boot-f9a37289b83100cf9c75114283c1216c1149386c.zip | |
sunxi: Add support for gt90h-v4 tablets
The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM
and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot.
The pmic setup on this board is somewhat special, dcdc2 MUST be set
to 1.1V instead of the usual 1.2V otherwise the board is very unstable.
aldo1 is used to power the micro sd slot, dldo1 is used for wifi.
This commit adds a defconfig + dts (as submitted to the kernel) for
the gt90h-v4 pcb.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/gt90h_v4_defconfig | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig new file mode 100644 index 0000000000..3b72dc2e6d --- /dev/null +++ b/configs/gt90h_v4_defconfig @@ -0,0 +1,26 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A23=y +CONFIG_DRAM_CLK=480 +CONFIG_DRAM_ZQ=32767 +CONFIG_MMC0_CD_PIN="PB4" +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:55000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +CONFIG_USB_MUSB_HOST=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-gt90h-v4" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP221_DCDC2_VOLT=1100 +CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_AXP221_ALDO1_VOLT=3000 |