diff options
| author | Parthiban Nallathambi <parthiban@linumiz.com> | 2020-10-23 16:23:49 +0200 |
|---|---|---|
| committer | Lokesh Vutla <lokeshvutla@ti.com> | 2020-11-15 15:14:04 +0530 |
| commit | a1337e3581b74b62397767b5a8d8ff148ccb97c1 (patch) | |
| tree | b8f51bd69e609736d2a10ca86686a63ab02d10e8 /configs | |
| parent | 832bfad7451e2e7bd23c96edff2be050905ac3f6 (diff) | |
| download | u-boot-a1337e3581b74b62397767b5a8d8ff148ccb97c1.tar.gz u-boot-a1337e3581b74b62397767b5a8d8ff148ccb97c1.tar.xz u-boot-a1337e3581b74b62397767b5a8d8ff148ccb97c1.zip | |
ARM: am335x: Add phyBOARD REGOR support
phyBOARD-REGOR is based on phyCORE AM335x R2 SoM (PCL060).
CPU : AM335X-GP rev 2.1
Model: Phytec AM335x phyBOARD-REGOR
DRAM: 512 MiB
NAND: 512 MiB
MMC: OMAP SD/MMC: 0
eth0: ethernet@4a100000
Working:
- Eth0
- i2C
- MMC/SD
- NAND
- UART
- USB (host)
Device trees were taken from Linux mainline:
commit c4d6fe731176 ("Linux 5.9.0")
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/phycore-am335x-r2-regor_defconfig | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/configs/phycore-am335x-r2-regor_defconfig b/configs/phycore-am335x-r2-regor_defconfig new file mode 100644 index 0000000000..6d40497537 --- /dev/null +++ b/configs/phycore-am335x-r2-regor_defconfig @@ -0,0 +1,88 @@ +CONFIG_ARM=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_OMAP2PLUS=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_ENV_OFFSET=0xA0000 +CONFIG_AM33XX=y +CONFIG_SYS_MPUCLK=1000 +CONFIG_TARGET_PHYCORE_AM335X_R2=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_FS_FAT=y +CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_SPL_PAYLOAD="u-boot.img" +CONFIG_DEFAULT_DEVICE_TREE="am335x-regor-rdk" +# CONFIG_FIT is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_DEFAULT_FDT_FILE="am335x-regor-rdk.dtb" +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_NAND_DRIVERS=y +CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_BASE=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_SPL=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PART=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_BOOTP_DNS2=y +CONFIG_CMD_PING=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nand0=nand.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),1m(NAND.u-boot),-(NAND.UBI)" +CONFIG_CMD_UBI=y +CONFIG_DOS_PARTITION=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_VERSION_VARIABLE=y +CONFIG_BOOTP_SEND_HOSTNAME=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DM_I2C=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_OMAP_HS=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 +CONFIG_DM_SPI_FLASH=y +CONFIG_DM_ETH=y +CONFIG_MII=y +CONFIG_DRIVER_TI_CPSW=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_OMAP3_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_TI=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETHER=y +CONFIG_FDT_FIXUP_PARTITIONS=y +# CONFIG_EFI_LOADER is not set |