diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2016-03-30 00:26:59 +0800 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2016-04-01 09:52:15 +0200 |
| commit | 7e4c5d207398ac38c5b97a7c99d79f0a518cc015 (patch) | |
| tree | e2da7320d650d6099fe4e6186ec68047d588a1c3 /configs/Cubietruck_plus_defconfig | |
| parent | 3cc7177913eb83cae6e20b2f71d4db40fb4d37e7 (diff) | |
| download | u-boot-7e4c5d207398ac38c5b97a7c99d79f0a518cc015.tar.gz u-boot-7e4c5d207398ac38c5b97a7c99d79f0a518cc015.tar.xz u-boot-7e4c5d207398ac38c5b97a7c99d79f0a518cc015.zip | |
sunxi: Cubietruck Plus: Enable USB Kconfig options in defconfig
The Cubietruck Plus uses all 3 USB controllers:
- USB OTG functions are provided by the musb USB OTG controller
- Onboard SATA is provied by a USB-SATA bridge connected to USB1
- The USB host ports on the board are provided by an HSIC USB hub
FLDO1 is set to 1.2V for HSIC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'configs/Cubietruck_plus_defconfig')
| -rw-r--r-- | configs/Cubietruck_plus_defconfig | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig index bb0b336a76..d625c21fcb 100644 --- a/configs/Cubietruck_plus_defconfig +++ b/configs/Cubietruck_plus_defconfig @@ -6,13 +6,21 @@ CONFIG_DRAM_ZQ=15355 CONFIG_DRAM_ODT_EN=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_I2C0_ENABLE=y +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH11" +CONFIG_USB1_VBUS_PIN="PD29" +CONFIG_USB2_VBUS_PIN="PL6" CONFIG_AXP_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_AXP_DLDO3_VOLT=2500 CONFIG_AXP_DLDO4_VOLT=3300 +CONFIG_AXP_FLDO1_VOLT=1200 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_HOST=y |