Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 95 deletions

diff --git a/common/cmd_mp.c b/common/cmd_mp.c
deleted file mode 100644
index a80c642157..0000000000
--- a/common/cmd_mp.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-
-static int cpu_status_all(void)
-{
-	unsigned long cpuid;
-
-	for (cpuid = 0; ; cpuid++) {
-		if (!is_core_valid(cpuid)) {
-			if (cpuid == 0) {
-				printf("Core num: %lu is not valid\n", cpuid);
-				return 1;
-			}
-			break;
-		}
-		cpu_status(cpuid);
-	}
-
-	return 0;
-}
-
-static int
-cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unsigned long cpuid;
-
-	if (argc == 2 && strncmp(argv[1], "status", 6) == 0)
-		  return cpu_status_all();
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-	cpuid = simple_strtoul(argv[1], NULL, 10);
-	if (!is_core_valid(cpuid)) {
-		printf ("Core num: %lu is not valid\n",	cpuid);
-		return 1;
-	}
-
-
-	if (argc == 3) {
-		if (strncmp(argv[2], "reset", 5) == 0)
-			cpu_reset(cpuid);
-		else if (strncmp(argv[2], "status", 6) == 0)
-			cpu_status(cpuid);
-		else if (strncmp(argv[2], "disable", 7) == 0)
-			return cpu_disable(cpuid);
-		else
-			return CMD_RET_USAGE;
-
-		return 0;
-	}
-
-	/* 4 or greater, make sure its release */
-	if (strncmp(argv[2], "release", 7) != 0)
-		return CMD_RET_USAGE;
-
-	if (cpu_release(cpuid, argc - 3, argv + 3))
-		return CMD_RET_USAGE;
-
-	return 0;
-}
-
-#ifdef CONFIG_SYS_LONGHELP
-static char cpu_help_text[] =
-	    "<num> reset                 - Reset cpu <num>\n"
-	"cpu status                      - Status of all cpus\n"
-	"cpu <num> status                - Status of cpu <num>\n"
-	"cpu <num> disable               - Disable cpu <num>\n"
-	"cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]"
-#ifdef CONFIG_PPC
-	"\n"
-	"                         [args] : <pir> <r3> <r6>\n" \
-	"                                   pir - processor id (if writeable)\n" \
-	"                                    r3 - value for gpr 3\n" \
-	"                                    r6 - value for gpr 6\n" \
-	"\n" \
-	"     Use '-' for any arg if you want the default value.\n" \
-	"     Default for r3 is <num> and r6 is 0\n" \
-	"\n" \
-	"     When cpu <num> is released r4 and r5 = 0.\n" \
-	"     r7 will contain the size of the initial mapped area"
-#endif
-	"";
-#endif
-
-U_BOOT_CMD(
-	cpu, CONFIG_SYS_MAXARGS, 1, cpu_cmd,
-	"Multiprocessor CPU boot manipulation and release", cpu_help_text
-);