Merge branch 'tom' of git://git.denx.de/u-boot-x86

3 files changed, 0 insertions, 181 deletions

diff --git a/board/sandbox/sandbox/Makefile b/board/sandbox/sandbox/Makefile
deleted file mode 100644
index a0b9880d6e..0000000000
--- a/board/sandbox/sandbox/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Copyright (c) 2011 The Chromium OS Authors.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= sandbox.o
diff --git a/board/sandbox/sandbox/README.sandbox b/board/sandbox/sandbox/README.sandbox
deleted file mode 100644
index 69895574ff..0000000000
--- a/board/sandbox/sandbox/README.sandbox
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-Native Execution of U-Boot
-==========================
-
-The 'sandbox' architecture is designed to allow U-Boot to run under Linux on
-almost any hardware. To achieve this it builds U-Boot (so far as possible)
-as a normal C application with a main() and normal C libraries.
-
-All of U-Boot's architecture-specific code therefore cannot be built as part
-of the sandbox U-Boot. The purpose of running U-Boot under Linux is to test
-all the generic code, not specific to any one architecture. The idea is to
-create unit tests which we can run to test this upper level code.
-
-CONFIG_SANDBOX is defined when building a native board.
-
-The chosen vendor and board names are also 'sandbox', so there is a single
-board in board/sandbox/sandbox.
-
-CONFIG_SANDBOX_BIG_ENDIAN should be defined when running on big-endian
-machines.
-
-Note that standalone/API support is not available at present.
-
-The serial driver is a very simple implementation which reads and writes to
-the console. It does not set the terminal into raw mode, so cursor keys and
-history will not work yet.
-
-
-SPI Emulation
--------------
-
-Sandbox supports SPI and SPI flash emulation.
-
-This is controlled by the spi_sf argument, the format of which is:
-
-   bus:cs:device:file
-
-   bus    - SPI bus number
-   cs     - SPI chip select number
-   device - SPI device emulation name
-   file   - File on disk containing the data
-
-For example:
-
- dd if=/dev/zero of=spi.bin bs=1M count=4
- ./u-boot --spi_sf 0:0:M25P16:spi.bin
-
-With this setup you can issue SPI flash commands as normal:
-
-=>sf probe
-SF: Detected M25P16 with page size 64 KiB, total 2 MiB
-=>sf read 0 0 10000
-SF: 65536 bytes @ 0x0 Read: OK
-=>
-
-Since this is a full SPI emulation (rather than just flash), you can
-also use low-level SPI commands:
-
-=>sspi 0:0 32 9f
-FF202015
-
-This is issuing a READ_ID command and getting back 20 (ST Micro) part
-0x2015 (the M25P16).
-
-Drivers are connected to a particular bus/cs using sandbox's state
-structure (see the 'spi' member). A set of operations must be provided
-for each driver.
-
-
-Configuration settings for the curious are:
-
-CONFIG_SANDBOX_SPI_MAX_BUS
-	The maximum number of SPI buses supported by the driver (default 1).
-
-CONFIG_SANDBOX_SPI_MAX_CS
-	The maximum number of chip selects supported by the driver
-	(default 10).
-
-CONFIG_SPI_IDLE_VAL
-	The idle value on the SPI bus
-
-
-Tests
------
-
-So far we have no tests, but when we do these will be documented here.
diff --git a/board/sandbox/sandbox/sandbox.c b/board/sandbox/sandbox/sandbox.c
deleted file mode 100644
index e4d4e021bc..0000000000
--- a/board/sandbox/sandbox/sandbox.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <cros_ec.h>
-#include <dm.h>
-#include <os.h>
-#include <asm/u-boot-sandbox.h>
-
-/*
- * Pointer to initial global data area
- *
- * Here we initialize it.
- */
-gd_t *gd;
-
-/* Add a simple GPIO device */
-U_BOOT_DEVICE(gpio_sandbox) = {
-	.name = "gpio_sandbox",
-};
-
-void flush_cache(unsigned long start, unsigned long size)
-{
-}
-
-unsigned long timer_read_counter(void)
-{
-	return os_get_nsec() / 1000;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-	return 0;
-}
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
-#ifdef CONFIG_VIDEO_SANDBOX_SDL
-	int ret;
-
-	ret = sandbox_lcd_sdl_early_init();
-	if (ret) {
-		puts("Could not init sandbox LCD emulation\n");
-		return ret;
-	}
-#endif
-
-	return 0;
-}
-#endif
-
-int arch_early_init_r(void)
-{
-#ifdef CONFIG_CROS_EC
-	if (cros_ec_board_init()) {
-		printf("%s: Failed to init EC\n", __func__);
-		return 0;
-	}
-#endif
-
-	return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-	if (cros_ec_get_error()) {
-		/* Force console on */
-		gd->flags &= ~GD_FLG_SILENT;
-
-		printf("cros-ec communications failure %d\n",
-		       cros_ec_get_error());
-		puts("\nPlease reset with Power+Refresh\n\n");
-		panic("Cannot init cros-ec device");
-		return -1;
-	}
-	return 0;
-}
-#endif