Merge branch 'master' of git://git.denx.de/u-boot

122 files changed, 1902 insertions, 2617 deletions

diff --git a/board/BuS/eb_cpux9k2/Kconfig b/board/BuS/eb_cpux9k2/Kconfig
index 230e64d8fc..e2a787a1a8 100644
--- a/board/BuS/eb_cpux9k2/Kconfig
+++ b/board/BuS/eb_cpux9k2/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "BuS"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "eb_cpux9k2"
 
diff --git a/board/BuS/vl_ma2sc/Kconfig b/board/BuS/vl_ma2sc/Kconfig
index 2f43519089..848177f4c4 100644
--- a/board/BuS/vl_ma2sc/Kconfig
+++ b/board/BuS/vl_ma2sc/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "BuS"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "vl_ma2sc"
 
diff --git a/board/Marvell/dkb/Kconfig b/board/Marvell/dkb/Kconfig
deleted file mode 100644
index f6748941c6..0000000000
--- a/board/Marvell/dkb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_DKB
-
-config SYS_BOARD
-	default "dkb"
-
-config SYS_VENDOR
-	default "Marvell"
-
-config SYS_SOC
-	default "pantheon"
-
-config SYS_CONFIG_NAME
-	default "dkb"
-
-endif
diff --git a/board/Marvell/dkb/MAINTAINERS b/board/Marvell/dkb/MAINTAINERS
deleted file mode 100644
index c272b7ae74..0000000000
--- a/board/Marvell/dkb/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DKB BOARD
-M:	Lei Wen <leiwen@marvell.com>
-S:	Maintained
-F:	board/Marvell/dkb/
-F:	include/configs/dkb.h
-F:	configs/dkb_defconfig
diff --git a/board/Marvell/dkb/Makefile b/board/Marvell/dkb/Makefile
deleted file mode 100644
index 9d88579120..0000000000
--- a/board/Marvell/dkb/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2011
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Lei Wen <leiwen@marvell.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= dkb.o
diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c
deleted file mode 100644
index c0c31259a3..0000000000
--- a/board/Marvell/dkb/dkb.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2011
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Lei Wen <leiwen@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mvmfp.h>
-#include <i2c.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/cpu.h>
-#ifdef CONFIG_GENERIC_MMC
-#include <sdhci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	u32 mfp_cfg[] = {
-		/* Enable Console on UART2 */
-		MFP47_UART2_RXD,
-		MFP48_UART2_TXD,
-
-		/* I2C */
-		MFP53_CI2C_SCL,
-		MFP54_CI2C_SDA,
-
-		/* MMC1 */
-		MFP_MMC1_DAT7,
-		MFP_MMC1_DAT6,
-		MFP_MMC1_DAT5,
-		MFP_MMC1_DAT4,
-		MFP_MMC1_DAT3,
-		MFP_MMC1_DAT2,
-		MFP_MMC1_DAT1,
-		MFP_MMC1_DAT0,
-		MFP_MMC1_CMD,
-		MFP_MMC1_CLK,
-		MFP_MMC1_CD,
-		MFP_MMC1_WP,
-
-		MFP_EOC		/*End of configureation*/
-	};
-	/* configure MFP's */
-	mfp_config(mfp_cfg);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* arch number of Board */
-	gd->bd->bi_arch_number = MACH_TYPE_TTC_DKB;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = panth_sdram_base(0) + 0x100;
-	return 0;
-}
-
-#ifdef CONFIG_GENERIC_MMC
-#define I2C_SLAVE_ADDR	0x34
-#define LDO13_REG	0x28
-#define LDO_V30		0x6
-#define LDO_VOLTAGE(x)	((x & 0x7) << 1)
-#define LDO_EN		0x1
-int board_mmc_init(bd_t *bd)
-{
-	ulong mmc_base_address[CONFIG_SYS_MMC_NUM] = CONFIG_SYS_MMC_BASE;
-	u8 i, data;
-
-	/* set LDO 13 to 3.0v */
-	data = LDO_VOLTAGE(LDO_V30) | LDO_EN;
-	i2c_write(I2C_SLAVE_ADDR, LDO13_REG, 1, &data, 1);
-
-	for (i = 0; i < CONFIG_SYS_MMC_NUM; i++) {
-		if (mv_sdh_init(mmc_base_address[i], 0, 0,
-				SDHCI_QUIRK_32BIT_DMA_ADDR))
-			return 1;
-	}
-
-	return 0;
-}
-#endif
diff --git a/board/afeb9260/Kconfig b/board/afeb9260/Kconfig
index 6a5a93139d..fb64c9cec7 100644
--- a/board/afeb9260/Kconfig
+++ b/board/afeb9260/Kconfig
@@ -3,9 +3,6 @@ if TARGET_AFEB9260
 config SYS_BOARD
 	default "afeb9260"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "afeb9260"
 
diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig
index 530a6efd60..848e08fbba 100644
--- a/board/amcc/canyonlands/Kconfig
+++ b/board/amcc/canyonlands/Kconfig
@@ -9,4 +9,42 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "canyonlands"
 
+choice BOARD_TYPE
+	prompt "Select which board to build for"
+
+config CANYONLANDS
+	bool "Glacier"
+	help
+	  Select this to build for the Canyonlands 460EX board.
+
+config GLACIER
+	bool "Glacier"
+	help
+	  Select this to build for the Glacier 460GT board.
+
+config ARCHES
+	bool "Arches"
+	help
+	  Select this to build for the Arches dual 460GT board.
+
+endchoice
+
+config DISPLAY_BOARDINFO
+	bool
+	default y
+
+config DM
+	default y
+
+config DM_SERIAL
+	default y
+
+config SYS_MALLOC_F
+	bool
+	default y
+
+config SYS_MALLOC_F_LEN
+	hex
+	default 0x400
+
 endif
diff --git a/board/amcc/canyonlands/MAINTAINERS b/board/amcc/canyonlands/MAINTAINERS
index 52bf004f6c..8be8a52a3a 100644
--- a/board/amcc/canyonlands/MAINTAINERS
+++ b/board/amcc/canyonlands/MAINTAINERS
@@ -6,3 +6,4 @@ F:	include/configs/canyonlands.h
 F:	configs/arches_defconfig
 F:	configs/canyonlands_defconfig
 F:	configs/glacier_defconfig
+F:	configs/glacier_ramboot_defconfig
diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk
index 63b8973700..5cc90d2050 100644
--- a/board/amcc/canyonlands/config.mk
+++ b/board/amcc/canyonlands/config.mk
@@ -8,8 +8,6 @@
 # AMCC 460EX/460GT Evaluation Board (Canyonlands) board
 #
 
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG
 endif
diff --git a/board/amcc/canyonlands/u-boot-ram.lds b/board/amcc/canyonlands/u-boot-ram.lds
new file mode 100644
index 0000000000..1750c74a19
--- /dev/null
+++ b/board/amcc/canyonlands/u-boot-ram.lds
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .text      :
+  {
+    _image_copy_start = .;
+    arch/powerpc/cpu/ppc4xx/start.o	(.text*)
+    board/amcc/canyonlands/init.o	(.text*)
+
+    *(.text*)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    KEEP(*(.got))
+    _GOT2_TABLE_ = .;
+    KEEP(*(.got2))
+    _FIXUP_TABLE_ = .;
+    KEEP(*(.fixup))
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data*)
+    *(.sdata*)
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+
+  .u_boot_list : {
+	KEEP(*(SORT(.u_boot_list*)));
+  }
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : {
+	*(.data.init)
+	. = ALIGN(256);
+	LONG(0) LONG(0)		/* Extend u-boot.bin to here */
+  }
+  __init_end = .;
+  _end = .;
+  _image_binary_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.bss*)
+   *(.sbss*)
+   *(COMMON)
+   . = ALIGN(4);
+  }
+
+  __bss_end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/atmel/at91rm9200ek/Kconfig b/board/atmel/at91rm9200ek/Kconfig
index bad4a37da0..952351dcdb 100644
--- a/board/atmel/at91rm9200ek/Kconfig
+++ b/board/atmel/at91rm9200ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "at91rm9200ek"
 
diff --git a/board/atmel/at91sam9260ek/Kconfig b/board/atmel/at91sam9260ek/Kconfig
index fe00ed5e60..3844f086b4 100644
--- a/board/atmel/at91sam9260ek/Kconfig
+++ b/board/atmel/at91sam9260ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "at91sam9260ek"
 
diff --git a/board/atmel/at91sam9261ek/Kconfig b/board/atmel/at91sam9261ek/Kconfig
index d839c1a632..2971b3cf9f 100644
--- a/board/atmel/at91sam9261ek/Kconfig
+++ b/board/atmel/at91sam9261ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "at91sam9261ek"
 
diff --git a/board/atmel/at91sam9263ek/Kconfig b/board/atmel/at91sam9263ek/Kconfig
index 311c504da2..3f0873fe51 100644
--- a/board/atmel/at91sam9263ek/Kconfig
+++ b/board/atmel/at91sam9263ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "at91sam9263ek"
 
diff --git a/board/atmel/at91sam9m10g45ek/Kconfig b/board/atmel/at91sam9m10g45ek/Kconfig
index 1bc086a483..211c411ef6 100644
--- a/board/atmel/at91sam9m10g45ek/Kconfig
+++ b/board/atmel/at91sam9m10g45ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "at91sam9m10g45ek"
 
diff --git a/board/atmel/at91sam9n12ek/Kconfig b/board/atmel/at91sam9n12ek/Kconfig
index cf1d1a3670..816003a5de 100644
--- a/board/atmel/at91sam9n12ek/Kconfig
+++ b/board/atmel/at91sam9n12ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "at91sam9n12ek"
 
diff --git a/board/atmel/at91sam9rlek/Kconfig b/board/atmel/at91sam9rlek/Kconfig
index 438d300421..81a839ac03 100644
--- a/board/atmel/at91sam9rlek/Kconfig
+++ b/board/atmel/at91sam9rlek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "at91sam9rlek"
 
diff --git a/board/atmel/at91sam9x5ek/Kconfig b/board/atmel/at91sam9x5ek/Kconfig
index 5c5ec61577..3f92754fb9 100644
--- a/board/atmel/at91sam9x5ek/Kconfig
+++ b/board/atmel/at91sam9x5ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "at91sam9x5ek"
 
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 03d767a4a8..dacd427831 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -18,14 +18,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
 	{
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_NONE,
 	}, {
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_WRBACK,
 	},
 };
@@ -52,6 +52,8 @@ int board_early_init_f(void)
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
 	portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
+	sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
 	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 
 #if defined(CONFIG_MACB)
@@ -68,24 +70,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	unsigned long expected_size;
-	unsigned long actual_size;
-	void *sdram_base;
-
-	sdram_base = uncached(EBI_SDRAM_BASE);
-
-	expected_size = sdram_init(sdram_base, &sdram_config);
-	actual_size = get_ram_size(sdram_base, expected_size);
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-
-	return actual_size;
-}
-
 int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/atmel/atngw100mkii/atngw100mkii.c b/board/atmel/atngw100mkii/atngw100mkii.c
index 72d19e430e..8e215d5fcf 100644
--- a/board/atmel/atngw100mkii/atngw100mkii.c
+++ b/board/atmel/atngw100mkii/atngw100mkii.c
@@ -23,21 +23,21 @@ DECLARE_GLOBAL_DATA_PTR;
 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
 	{
 		/* Atmel AT49BV640D 8 MiB x16 NOR flash on NCS0 */
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_NONE,
 	}, {
 		/* Micron MT29F2G16AAD 256 MiB x16 NAND flash on NCS3 */
-		.virt_pgno	= EBI_SRAM_CS3_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SRAM_CS3_SIZE >> PAGE_SHIFT,
-		.phys		= (EBI_SRAM_CS3_BASE >> PAGE_SHIFT)
+		.virt_pgno	= EBI_SRAM_CS3_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SRAM_CS3_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (EBI_SRAM_CS3_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_NONE,
 	}, {
 		/* 2x16-bit ISSI IS42S16320B 64 MiB SDRAM (128 MiB total) */
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_WRBACK,
 	},
 };
@@ -69,6 +69,9 @@ int board_early_init_f(void)
 	portmux_select_gpio(PORTMUX_PORT_E, 1 << 23,
 			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH
 			| PORTMUX_DRIVE_MIN);
+
+	sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
 	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 
 #if defined(CONFIG_MACB)
@@ -85,24 +88,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	unsigned long expected_size;
-	unsigned long actual_size;
-	void *sdram_base;
-
-	sdram_base = uncached(EBI_SDRAM_BASE);
-
-	expected_size = sdram_init(sdram_base, &sdram_config);
-	actual_size = get_ram_size(sdram_base, expected_size);
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-
-	return actual_size;
-}
-
 int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 4b6b90f683..fd4363bece 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -17,14 +17,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
 	{
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_NONE,
 	}, {
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_WRBACK,
 	},
 };
@@ -78,7 +78,10 @@ int board_early_init_f(void)
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
 	portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH);
+	sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
 	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
+
 #if defined(CONFIG_MACB)
 	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
 	portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
@@ -90,24 +93,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	unsigned long expected_size;
-	unsigned long actual_size;
-	void *sdram_base;
-
-	sdram_base = uncached(EBI_SDRAM_BASE);
-
-	expected_size = sdram_init(sdram_base, &sdram_config);
-	actual_size = get_ram_size(sdram_base, expected_size);
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-
-	return actual_size;
-}
-
 int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x10;
diff --git a/board/atmel/sama5d3_xplained/Kconfig b/board/atmel/sama5d3_xplained/Kconfig
index 0ba8a7bf93..2df751a264 100644
--- a/board/atmel/sama5d3_xplained/Kconfig
+++ b/board/atmel/sama5d3_xplained/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "sama5d3_xplained"
 
diff --git a/board/atmel/sama5d3xek/Kconfig b/board/atmel/sama5d3xek/Kconfig
index 2a9ed23ecf..abd1ad81fc 100644
--- a/board/atmel/sama5d3xek/Kconfig
+++ b/board/atmel/sama5d3xek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "sama5d3xek"
 
diff --git a/board/atmel/sama5d4_xplained/Kconfig b/board/atmel/sama5d4_xplained/Kconfig
index f320a68d30..2cb03cb178 100644
--- a/board/atmel/sama5d4_xplained/Kconfig
+++ b/board/atmel/sama5d4_xplained/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "sama5d4_xplained"
 
diff --git a/board/atmel/sama5d4ek/Kconfig b/board/atmel/sama5d4ek/Kconfig
index 7dc569c411..1a634032ac 100644
--- a/board/atmel/sama5d4ek/Kconfig
+++ b/board/atmel/sama5d4ek/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "atmel"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "sama5d4ek"
 
diff --git a/board/bluewater/snapper9260/Kconfig b/board/bluewater/snapper9260/Kconfig
index c896c46895..b8e9cbc585 100644
--- a/board/bluewater/snapper9260/Kconfig
+++ b/board/bluewater/snapper9260/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "bluewater"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "snapper9260"
 
diff --git a/board/buffalo/lsxl/README b/board/buffalo/lsxl/README
new file mode 100644
index 0000000000..ef5ed42880
--- /dev/null
+++ b/board/buffalo/lsxl/README
@@ -0,0 +1,139 @@
+Intro
+-----
+The Buffalo Linkstation Pro/Live, codename LS-XHL and LS-CHLv2, is a single
+disk NAS server. The PCBs of the LS-XHL and LS-CHLv2 are almost the same.
+The LS-XHL has a faster CPU and more RAM with a wider data bus, therefore
+the LS-XHL PCB has two SDRAM chips. Both have a Kirkwood CPU (Marvell
+88F6281). The only on-board storage is a 4 Mbit SPI flash which stores the
+bootloader and its environment. The linux kernel and the initial ramdisk
+are loaded from the hard disk.
+
+
+Rescue Mode
+-----------
+These linkstations don't have a populated serial port. There is no way to
+access an (unmodified) board other than using the netconsole. If you want
+to recover from a bad environment setting or an empty environment, you can
+do this only with a working network connection.
+
+Therefore, on entering the resuce mode, a random ethernet address is
+generated if no valid address could be loaded from the environment variable
+'ethaddr' and a DHCP request is sent. After a successful DHCP response is
+received, the network settings are configured and the ncip is unset. Thus
+all netconsole packets are broadcasted and you can use the netconsole to
+access board from any host within the network segment. To determine the IP
+address assigned to the board, you either have to sniff the traffic or
+check the logs/leases of your DHCP server.
+
+The resuce mode is selected by holding the push button for at least one
+second, while powering-on the device. The status LED turns solid amber if
+the resuce mode is enabled, thus providing a visual feedback.
+
+Pressing the same button for at least 10 seconds on power-up will erase the
+environment and reset the board. In this case the visual indication will
+be:
+- blinking blue, for about one second
+- solid amber, for about nine seconds
+- blinking amber, until you release the button
+
+This ensures, that you still can recover a device with a broken
+environment by first erasing the environment and then entering the rescue
+mode.
+
+Once the rescue mode is started, use the ncb binary from the tools/
+directory to access your board. There is a helper script named
+'restore_env' to save your changes. It unsets all the network variables
+which were set by the rescue mode, saves your changes and then resets the
+board.
+
+The common use case for this is setting a MAC address. Let us assume you
+have an empty environment, the board comes up with the amber LED blinking.
+Then you enter the rescue mode, connect to the board with the ncb tool and
+use the following commands to set your MAC address:
+
+  setenv ethaddr 00:00:00:00:00:00
+  run restore_env
+
+Of course you need to replace the 00:00:00:00:00:00 with your valid MAC
+address, which can be found on a sticker on the bottom of your box.
+
+
+Status LED
+----------
+blinking blue
+  Bootloader is running normally.
+
+blinking amber
+  No ethaddr set. Use the `Rescue Mode` to set one.
+
+blinking red
+  Something bad happend during loading the operating system.
+
+The default behavior of the linux kernel is to turn on the blue LED. So if
+the blinking blue LED changes to solid blue the kernel was loaded
+successfully.
+
+
+Power-on Switch
+---------------
+The power-on switch is a software switch. If it is not in ON position when
+the bootloader starts, the bootloader will disable the HDD and USB power
+and stop the fan. Then it loops until the switch is in ON position again,
+enables the power and fan again and continue booting.
+
+
+Boot sources
+------------
+The environment defines several different boot sources:
+
+legacy
+  This is the default boot source. It loads the kernel and ramdisk from the
+  attached HDD using the original filenames. The load addresses were
+  modified to support loading larger kernels. But it should behave the same
+  as the original bootloader.
+
+hdd
+  Use this for new-style booting. Loads three files /vmlinuz, /initrd.img
+  and /dtb from the boot partition. This should work out of the box if you
+  have debian and the flash-kernel package installed.
+
+usb
+  Same as hdd expect, that the files are loaded from an attached USB mass
+  storage device and the filename for the device tree is kirkwood-lsxhl.dtb
+  (or kirkwood-lschlv2.dtb).
+
+net
+  Same as usb expect, that the file are loaded from the network.
+
+rescue
+  Automatically activated if the push button is pressed for at least one
+  second on power-up. Does a DHCP request and enables the network console.
+  See `Rescue Mode` for more information.
+
+You can change the boot source by setting the 'bootsource' variable to the
+corresponding value. Please note, that the restore_env script will the the
+bootsource back to 'legacy'.
+
+
+Flash map
+---------
+00000 - 5ffff   u-boot
+60000 - 6ffff   reserved, may be used to store dtb
+70000 - 7ffff   u-boot environment
+
+
+Compiling
+---------
+make lsxhl_config (or lschlv2_config)
+make u-boot.kwb
+
+
+Update your board
+-----------------
+Just flash the resulting u-boot.kwb to the beginning of the SPI flash. If
+you already have a bootloader CLI, you can use the following commands:
+
+ sf probe 0
+ bootp ${loadaddr} u-boot.kwb
+ sf erase 0 +${filelen}
+ sf write 0 ${fileaddr} ${filesize}
diff --git a/board/calao/sbc35_a9g20/Kconfig b/board/calao/sbc35_a9g20/Kconfig
index fb5a1a3f42..37ecfb5f7d 100644
--- a/board/calao/sbc35_a9g20/Kconfig
+++ b/board/calao/sbc35_a9g20/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "calao"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "sbc35_a9g20"
 
diff --git a/board/calao/tny_a9260/Kconfig b/board/calao/tny_a9260/Kconfig
index b1de8f8ba8..2b663298f3 100644
--- a/board/calao/tny_a9260/Kconfig
+++ b/board/calao/tny_a9260/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "calao"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "tny_a9260"
 
diff --git a/board/calao/usb_a9263/Kconfig b/board/calao/usb_a9263/Kconfig
index 7a159dc3ba..19e446ded5 100644
--- a/board/calao/usb_a9263/Kconfig
+++ b/board/calao/usb_a9263/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "calao"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "usb_a9263"
 
diff --git a/board/cm4008/Kconfig b/board/cm4008/Kconfig
deleted file mode 100644
index de87d5bc12..0000000000
--- a/board/cm4008/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CM4008
-
-config SYS_BOARD
-	default "cm4008"
-
-config SYS_SOC
-	default "ks8695"
-
-config SYS_CONFIG_NAME
-	default "cm4008"
-
-endif
diff --git a/board/cm4008/MAINTAINERS b/board/cm4008/MAINTAINERS
deleted file mode 100644
index 5f08bc3b5c..0000000000
--- a/board/cm4008/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CM4008 BOARD
-M:	Greg Ungerer <greg.ungerer@opengear.com>
-S:	Maintained
-F:	board/cm4008/
-F:	include/configs/cm4008.h
-F:	configs/cm4008_defconfig
diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile
deleted file mode 100644
index 04b152917b..0000000000
--- a/board/cm4008/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cm4008.o flash.o
diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c
deleted file mode 100644
index 740e16443e..0000000000
--- a/board/cm4008/cm4008.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com>
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-#define	ks8695_read(a)	  *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
-#define	ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b)
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int env_flash_cmdline (void)
-{
-	char *sp = (char *) 0x0201c020;
-	char *ep;
-	int len;
-
-	/* Check if "erase" push button is depressed */
-	if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) {
-		printf("### Entering network recovery mode...\n");
-		setenv("bootargs", "console=ttyAM0,115200 mem=16M initrd=0x400000,6M root=/dev/ram0");
-		setenv("bootcmd", "bootp 0x400000; gofsk 0x400000");
-		setenv("bootdelay", "2");
-		return 0;
-	}
-
-	/* Check for flash based kernel boot args to use as default */
-	for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++)
-		;
-
-	if ((len > 0) && (len <1024))
-		setenv("bootargs", sp);
-
-	return 0;
-}
-
-int board_late_init (void)
-{
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return ks8695_eth_initialize();
-}
-
-int board_init (void)
-{
-	/* arch number of CM4008 */
-	gd->bd->bi_arch_number = 624;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x00000100;
-
-	/* power down all but port 0 on the switch */
-	ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005);
-	ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005);
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
-
-	return (0);
-}
diff --git a/board/cm4008/config.mk b/board/cm4008/config.mk
deleted file mode 100644
index 0d5923b941..0000000000
--- a/board/cm4008/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x00f00000
diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c
deleted file mode 100644
index 8315a57ed9..0000000000
--- a/board/cm4008/flash.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com
- *
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-#include <asm/sections.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, unsigned char data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			break;
-		case 1:
-			/* ignore for now */
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start),
-		       &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return;
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-			info->protect[i] = 0;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F128J3A:
-		printf ("28F128J3A\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
-{
-	volatile unsigned char value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = 0xAA;
-	addr[0x2AAA] = 0x55;
-	addr[0x5555] = 0x90;
-
-	mb ();
-	value = addr[0];
-
-	switch (value) {
-
-	case (unsigned char)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = 0xFF;	/* restore read mode */
-		return (0);	/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[2];	/* device ID            */
-
-	switch (value) {
-
-	case (unsigned char)INTEL_ID_28F640J3A:
-		info->flash_id += FLASH_28F640J3A;
-		info->sector_count = 64;
-		info->size = 0x00800000;
-		break;		/* => 8 MB     */
-
-	case (unsigned char)INTEL_ID_28F128J3A:
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x01000000;
-		break;		/* => 16 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = 0xFF;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int prot, sect;
-	ulong type;
-	int rcode = 0;
-	ulong start;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot)
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	else
-		printf ("\n");
-
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile unsigned char *addr;
-			unsigned char status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			addr = (volatile unsigned char *) (info->start[sect]);
-			*addr = 0x50;	/* clear status register */
-			*addr = 0x20;	/* erase setup */
-			*addr = 0xD0;	/* erase confirm */
-
-			while (((status = *addr) & 0x80) != 0x80) {
-				if (get_timer(start) >
-				    CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = 0xB0;	/* suspend erase */
-					*addr = 0xFF;	/* reset to read mode */
-					rcode = 1;
-					break;
-				}
-			}
-
-			*addr = 0x50;	/* clear status register cmd */
-			*addr = 0xFF;	/* resest to read mode */
-
-			printf (" done\n");
-		}
-	}
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	unsigned char data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return 4;
-
-	wp = addr;
-	port_width = 1;
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, unsigned char data)
-{
-	volatile unsigned char *addr = (volatile unsigned char *) dest;
-	ulong status;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr,
-			(ulong) * addr);
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	*addr = 0x40;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((status = *addr) & 0x80) != 0x80) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = 0xFF;	/* restore read mode */
-			return (1);
-		}
-	}
-
-	*addr = 0xFF;	/* restore read mode */
-
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/cm41xx/Kconfig b/board/cm41xx/Kconfig
deleted file mode 100644
index 99e675b12d..0000000000
--- a/board/cm41xx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CM41XX
-
-config SYS_BOARD
-	default "cm41xx"
-
-config SYS_SOC
-	default "ks8695"
-
-config SYS_CONFIG_NAME
-	default "cm41xx"
-
-endif
diff --git a/board/cm41xx/MAINTAINERS b/board/cm41xx/MAINTAINERS
deleted file mode 100644
index f10eeb58f3..0000000000
--- a/board/cm41xx/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CM41XX BOARD
-#M:	-
-S:	Maintained
-F:	board/cm41xx/
-F:	include/configs/cm41xx.h
-F:	configs/cm41xx_defconfig
diff --git a/board/cm41xx/Makefile b/board/cm41xx/Makefile
deleted file mode 100644
index b71ea05566..0000000000
--- a/board/cm41xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cm41xx.o flash.o
diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c
deleted file mode 100644
index eabad48a3c..0000000000
--- a/board/cm41xx/cm41xx.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com>
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-#define	ks8695_read(a)	  *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
-#define	ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b)
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int env_flash_cmdline (void)
-{
-	char *sp = (char *) 0x0201c020;
-	char *ep;
-	int len;
-
-	/* Check if "erase" push button is depressed */
-	if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) {
-		printf("### Entering network recovery mode...\n");
-		setenv("bootargs", "console=ttyAM0,115200 mem=32M initrd=0x400000,8M root=/dev/ram0");
-		setenv("bootcmd", "bootp 0x400000; gofsk 0x400000");
-		setenv("bootdelay", "2");
-		return 0;
-	}
-
-	/* Check for flash based kernel boot args to use as default */
-	for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++)
-		;
-
-	if ((len > 0) && (len <1024))
-		setenv("bootargs", sp);
-
-	return 0;
-}
-
-int board_late_init (void)
-{
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return ks8695_eth_initialize();
-}
-
-int board_init (void)
-{
-	/* arch number of CM41xx */
-	gd->bd->bi_arch_number = 672;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x00000100;
-
-	/* power down all but port 0 on the switch */
-	ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005);
-	ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005);
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
-
-	return (0);
-}
diff --git a/board/cm41xx/config.mk b/board/cm41xx/config.mk
deleted file mode 100644
index 0d5923b941..0000000000
--- a/board/cm41xx/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x00f00000
diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c
deleted file mode 100644
index 8315a57ed9..0000000000
--- a/board/cm41xx/flash.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * (C) Copyright 2005
- * Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com
- *
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-#include <asm/sections.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, unsigned char data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			break;
-		case 1:
-			/* ignore for now */
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start),
-		       &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return;
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-			info->protect[i] = 0;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F128J3A:
-		printf ("28F128J3A\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
-{
-	volatile unsigned char value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = 0xAA;
-	addr[0x2AAA] = 0x55;
-	addr[0x5555] = 0x90;
-
-	mb ();
-	value = addr[0];
-
-	switch (value) {
-
-	case (unsigned char)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = 0xFF;	/* restore read mode */
-		return (0);	/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[2];	/* device ID            */
-
-	switch (value) {
-
-	case (unsigned char)INTEL_ID_28F640J3A:
-		info->flash_id += FLASH_28F640J3A;
-		info->sector_count = 64;
-		info->size = 0x00800000;
-		break;		/* => 8 MB     */
-
-	case (unsigned char)INTEL_ID_28F128J3A:
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x01000000;
-		break;		/* => 16 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = 0xFF;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int prot, sect;
-	ulong type;
-	int rcode = 0;
-	ulong start;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot)
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	else
-		printf ("\n");
-
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile unsigned char *addr;
-			unsigned char status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			addr = (volatile unsigned char *) (info->start[sect]);
-			*addr = 0x50;	/* clear status register */
-			*addr = 0x20;	/* erase setup */
-			*addr = 0xD0;	/* erase confirm */
-
-			while (((status = *addr) & 0x80) != 0x80) {
-				if (get_timer(start) >
-				    CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = 0xB0;	/* suspend erase */
-					*addr = 0xFF;	/* reset to read mode */
-					rcode = 1;
-					break;
-				}
-			}
-
-			*addr = 0x50;	/* clear status register cmd */
-			*addr = 0xFF;	/* resest to read mode */
-
-			printf (" done\n");
-		}
-	}
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	unsigned char data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return 4;
-
-	wp = addr;
-	port_width = 1;
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, unsigned char data)
-{
-	volatile unsigned char *addr = (volatile unsigned char *) dest;
-	ulong status;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr,
-			(ulong) * addr);
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	*addr = 0x40;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((status = *addr) & 0x80) != 0x80) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = 0xFF;	/* restore read mode */
-			return (1);
-		}
-	}
-
-	*addr = 0xFF;	/* restore read mode */
-
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/compulab/cm_t335/Kconfig b/board/compulab/cm_t335/Kconfig
index 683efde764..3a8f304bd9 100644
--- a/board/compulab/cm_t335/Kconfig
+++ b/board/compulab/cm_t335/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "cm_t335"
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
 endif
diff --git a/board/davinci/da8xxevm/Kconfig b/board/davinci/da8xxevm/Kconfig
index 1a841ce6e0..1108e4b164 100644
--- a/board/davinci/da8xxevm/Kconfig
+++ b/board/davinci/da8xxevm/Kconfig
@@ -23,16 +23,3 @@ config SYS_CONFIG_NAME
 	default "da850evm"
 
 endif
-
-if TARGET_HAWKBOARD
-
-config SYS_BOARD
-	default "da8xxevm"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "hawkboard"
-
-endif
diff --git a/board/davinci/da8xxevm/MAINTAINERS b/board/davinci/da8xxevm/MAINTAINERS
index dd66f07e72..10c4e2ffc0 100644
--- a/board/davinci/da8xxevm/MAINTAINERS
+++ b/board/davinci/da8xxevm/MAINTAINERS
@@ -12,11 +12,3 @@ F:	include/configs/da850evm.h
 F:	configs/da850_am18xxevm_defconfig
 F:	configs/da850evm_defconfig
 F:	configs/da850evm_direct_nor_defconfig
-
-HAWKBOARD BOARD
-M:	Syed Mohammed Khasim <sm.khasim@gmail.com>
-M:	Sughosh Ganu <urwithsughosh@gmail.com>
-S:	Maintained
-F:	include/configs/hawkboard.h
-F:	configs/hawkboard_defconfig
-F:	configs/hawkboard_uart_defconfig
diff --git a/board/davinci/da8xxevm/Makefile b/board/davinci/da8xxevm/Makefile
index d3acacc33d..4da509b5e1 100644
--- a/board/davinci/da8xxevm/Makefile
+++ b/board/davinci/da8xxevm/Makefile
@@ -9,4 +9,3 @@
 
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= da830evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= da850evm.o
-obj-$(CONFIG_MACH_DAVINCI_HAWK)		+= hawkboard.o
diff --git a/board/davinci/da8xxevm/README.hawkboard b/board/davinci/da8xxevm/README.hawkboard
deleted file mode 100644
index d6ae02ec02..0000000000
--- a/board/davinci/da8xxevm/README.hawkboard
+++ /dev/null
@@ -1,92 +0,0 @@
-Summary
-=======
-The README is for the boot procedure used for TI's OMAP-L138 based
-hawkboard. The hawkboard comes with a 128MiB Nand flash and a 128MiB
-DDR SDRAM along with a host of other controllers.
-
-The hawkboard is booted in three stages. The initial bootloader which
-executes upon reset is the Rom Boot Loader(RBL) which sits in the
-internal ROM of the omap. The RBL initialises the memory and the nand
-controller, and copies the image stored at a predefined location(block
-1) of the nand flash. The image loaded by the RBL to the memory is the
-AIS signed spl image. This, in turns copies the u-boot binary from the
-nand flash to the memory and jumps to the u-boot entry point.
-
-AIS is an image format defined by TI for the images that are to be
-loaded to memory by the RBL. The image is divided into a series of
-sections and the image's entry point is specified. Each section comes
-with meta data like the target address the section is to be copied to
-and the size of the section, which is used by the RBL to load the
-image. At the end of the image the RBL jumps to the image entry
-point.
-
-The secondary stage bootloader(spl) which is loaded by the RBL then
-loads the u-boot from a predefined location in the nand to the memory
-and jumps to the u-boot entry point.
-
-The reason a secondary stage bootloader is used is because the ECC
-layout expected by the RBL is not the same as that used by
-u-boot/linux. This also implies that for flashing the spl image,we
-need to use the u-boot which uses the ECC layout expected by the
-RBL[1]. Booting u-boot over UART(UART boot) is explained here[2].
-
-
-Compilation
-===========
-Three images might be needed
-
-* spl - This is the secondary bootloader which boots the u-boot
-  binary.
-
-* u-boot binary - This is the image flashed to the nand and copied to
-  the memory by the spl.
-
-  Both the images get compiled with hawkboard_config, with the TOPDIR
-  containing the u-boot images, and the spl image under the spl
-  directory.
-
-  The spl image needs to be processed with the AISGen tool for
-  generating the AIS signed image to be flashed. Steps for generating
-  the AIS image are explained here[3].
-
-* u-boot for uart boot - This is same as the u-boot binary generated
-  above, with the sole difference of the CONFIG_SYS_TEXT_BASE being
-  0xc1080000, as expected by the RBL.
-
-  hawkboard_uart_config
-
-
-Flashing the images to Nand
-===========================
-The spl AIS image needs to be flashed to the block 1 of the Nand
-flash, as that is the location the RBL expects the image[4]. For
-flashing the spl, boot over the u-boot specified in [1], and flash the
-image
-
-=> tftpboot 0xc0700000 <nand_spl_ais.bin>
-=> nand erase 0x20000 0x20000
-=> nand write.e 0xc0700000 0x20000 <nand_spl_size>
-
-The u-boot binary is flashed at location 0xe0000(block 6) of the nand
-flash. The spl loader expects the u-boot at this location. For
-flashing the u-boot binary
-
-=> tftpboot 0xc0700000 u-boot.bin
-=> nand erase 0xe0000 0x40000
-=> nand write.e 0xc0700000 0xe0000 <u-boot-size>
-
-
-Links
-=====
-
-[1]
- http://code.google.com/p/hawkboard/downloads/detail?name=u-boot_uart_ais_v1.bin
-
-[2]
- http://elinux.org/Hawkboard#Booting_u-boot_over_UART
-
-[3]
- http://elinux.org/Hawkboard#Signing_u-boot_for_UART_boot
-
-[4]
- http://processors.wiki.ti.com/index.php/RBL_UBL_and_host_program#RBL_booting_from_NAND_and_ECC.2FBad_blocks
diff --git a/board/davinci/da8xxevm/hawkboard-ais-nand.cfg b/board/davinci/da8xxevm/hawkboard-ais-nand.cfg
deleted file mode 100644
index 2b12b6c08a..0000000000
--- a/board/davinci/da8xxevm/hawkboard-ais-nand.cfg
+++ /dev/null
@@ -1,4 +0,0 @@
-#	PLL0CFG0	PLL0CFG1
-PLL0	0x00180001	0x00000205
-#	PLL1CFG0	PLL1CFG1	DRPYC1R		SDCR		SDTIMR1		SDTIMR2		SDRCR		CLK2XSRC
-DDR2	0x15010001	0x00000002	0x00000043	0x00134632	0x26492a09	0x7d13c722	0x00000249	0x00000000
diff --git a/board/davinci/da8xxevm/hawkboard.c b/board/davinci/da8xxevm/hawkboard.c
deleted file mode 100644
index d5992a5564..0000000000
--- a/board/davinci/da8xxevm/hawkboard.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Modified for Hawkboard - Syed Mohammed Khasim <khasim@beagleboard.org>
- *
- * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc.  <nsekhar@ti.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2012 Sughosh Ganu <urwithsughosh@gmail.com>.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/pinmux_defs.h>
-#include <asm/arch/da8xx-usb.h>
-#include <ns16550.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct pinmux_resource pinmuxes[] = {
-	PINMUX_ITEM(emac_pins_mii),
-	PINMUX_ITEM(emac_pins_mdio),
-	PINMUX_ITEM(emifa_pins_cs3),
-	PINMUX_ITEM(emifa_pins_cs4),
-	PINMUX_ITEM(emifa_pins_nand),
-	PINMUX_ITEM(uart2_pins_txrx),
-	PINMUX_ITEM(uart2_pins_rtscts),
-};
-
-const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
-
-const struct lpsc_resource lpsc[] = {
-	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
-	{ DAVINCI_LPSC_SPI1 },	/* Serial Flash */
-	{ DAVINCI_LPSC_EMAC },	/* image download */
-	{ DAVINCI_LPSC_UART2 },	/* console */
-	{ DAVINCI_LPSC_GPIO },
-};
-
-const int lpsc_size = ARRAY_SIZE(lpsc);
-
-int board_init(void)
-{
-	/* arch number of the board */
-	gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_HAWKBOARD;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	/*
-	 * Kick Registers need to be set to allow access to Pin Mux registers
-	 */
-	writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
-	writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
-
-	/* set cfgchip3 to select mii */
-	writel(readl(&davinci_syscfg_regs->cfgchip3) &
-	       ~(1 << 8), &davinci_syscfg_regs->cfgchip3);
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	char buf[32];
-
-	printf("ARM Clock : %s MHz\n",
-	       strmhz(buf, clk_get(DAVINCI_ARM_CLKID)));
-
-	return 0;
-}
-
-int usb_phy_on(void)
-{
-	u32 timeout;
-	u32 cfgchip2;
-
-	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
-
-	cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
-		      CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ |
-		      CFGCHIP2_USB1PHYCLKMUX);
-	cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
-		    CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX |
-		    CFGCHIP2_USB1SUSPENDM;
-
-	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
-
-	/* wait until the usb phy pll locks */
-	timeout = DA8XX_USB_OTG_TIMEOUT;
-	while (timeout--)
-		if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
-			return 1;
-
-	/* USB phy was not turned on */
-	return 0;
-}
-
-void usb_phy_off(void)
-{
-	u32 cfgchip2;
-
-	/*
-	 * Power down the on-chip PHY.
-	 */
-	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
-	cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM);
-	cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET;
-	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
-}
diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
deleted file mode 100644
index 5c629db139..0000000000
--- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0xc1080000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  *(.vectors)
-	  arch/arm/cpu/arm926ejs/start.o		(.text*)
-	  arch/arm/cpu/arm926ejs/built-in.o		(.text*)
-	  drivers/mtd/nand/built-in.o			(.text*)
-
-	  *(.text*)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata*) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data)
-	__datarel_start = .;
-		*(.data.rel)
-	__datarelrolocal_start = .;
-		*(.data.rel.ro.local)
-	__datarellocal_start = .;
-		*(.data.rel.local)
-	__datarelro_start = .;
-		*(.data.rel.ro)
-	}
-
-	. = ALIGN(4);
-	__image_copy_end = .;
-	__rel_dyn_start = .;
-	__rel_dyn_end = .;
-
-	__got_start = .;
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	__got_end = .;
-
-	.bss :
-	{
-		. = ALIGN(4);
-		__bss_start = .;
-		*(.bss*)
-		. = ALIGN(4);
-		__bss_end = .;
-	}
-
-	.end :
-	{
-		*(.__end)
-	}
-}
diff --git a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
index a74547bf65..f9ac330c33 100644
--- a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
+++ b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
@@ -17,14 +17,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
 	{
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_NONE,
 	}, {
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_WRBACK,
 	},
 };
@@ -52,6 +52,9 @@ int board_early_init_f(void)
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
 	portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH);
+
+	sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
 	portmux_enable_usart3(PORTMUX_DRIVE_MIN);
 #if defined(CONFIG_MACB)
 	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
@@ -63,24 +66,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	unsigned long expected_size;
-	unsigned long actual_size;
-	void *sdram_base;
-
-	sdram_base = uncached(EBI_SDRAM_BASE);
-
-	expected_size = sdram_init(sdram_base, &sdram_config);
-	actual_size = get_ram_size(sdram_base, expected_size);
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-
-	return actual_size;
-}
-
 int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/egnite/ethernut5/Kconfig b/board/egnite/ethernut5/Kconfig
index c42c734f1f..5a6c1c5de1 100644
--- a/board/egnite/ethernut5/Kconfig
+++ b/board/egnite/ethernut5/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "egnite"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "ethernut5"
 
diff --git a/board/esd/meesc/Kconfig b/board/esd/meesc/Kconfig
index 5041041dd2..150348ac34 100644
--- a/board/esd/meesc/Kconfig
+++ b/board/esd/meesc/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "esd"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "meesc"
 
diff --git a/board/esd/otc570/Kconfig b/board/esd/otc570/Kconfig
index 55a2f70f40..4966f5f755 100644
--- a/board/esd/otc570/Kconfig
+++ b/board/esd/otc570/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "esd"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "otc570"
 
diff --git a/board/eukrea/cpu9260/Kconfig b/board/eukrea/cpu9260/Kconfig
index 9bd077b1ff..90d2124557 100644
--- a/board/eukrea/cpu9260/Kconfig
+++ b/board/eukrea/cpu9260/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "eukrea"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "cpu9260"
 
diff --git a/board/eukrea/cpuat91/Kconfig b/board/eukrea/cpuat91/Kconfig
index b69e4c3f82..27b005cdf4 100644
--- a/board/eukrea/cpuat91/Kconfig
+++ b/board/eukrea/cpuat91/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "eukrea"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "cpuat91"
 
diff --git a/board/faraday/a320evb/Kconfig b/board/faraday/a320evb/Kconfig
deleted file mode 100644
index 02c42cb0a2..0000000000
--- a/board/faraday/a320evb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_A320EVB
-
-config SYS_BOARD
-	default "a320evb"
-
-config SYS_VENDOR
-	default "faraday"
-
-config SYS_SOC
-	default "a320"
-
-config SYS_CONFIG_NAME
-	default "a320evb"
-
-endif
diff --git a/board/faraday/a320evb/MAINTAINERS b/board/faraday/a320evb/MAINTAINERS
deleted file mode 100644
index f13b015bb4..0000000000
--- a/board/faraday/a320evb/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-A320EVB BOARD
-M:	Po-Yu Chuang <ratbert@faraday-tech.com>
-S:	Maintained
-F:	board/faraday/a320evb/
-F:	include/configs/a320evb.h
-F:	configs/a320evb_defconfig
diff --git a/board/faraday/a320evb/Makefile b/board/faraday/a320evb/Makefile
deleted file mode 100644
index 518ce3fcb4..0000000000
--- a/board/faraday/a320evb/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= a320evb.o
-obj-y	+= lowlevel_init.o
diff --git a/board/faraday/a320evb/a320evb.c b/board/faraday/a320evb/a320evb.c
deleted file mode 100644
index c42635b705..0000000000
--- a/board/faraday/a320evb/a320evb.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-
-#include <faraday/ftsmc020.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	ftsmc020_init();	/* initialize Flash */
-	return 0;
-}
-
-int dram_init(void)
-{
-	unsigned long sdram_base = PHYS_SDRAM_1;
-	unsigned long expected_size = PHYS_SDRAM_1_SIZE;
-	unsigned long actual_size;
-
-	actual_size = get_ram_size((void *)sdram_base, expected_size);
-
-	gd->ram_size = actual_size;
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bd)
-{
-	return ftmac100_initialize(bd);
-}
-
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
-	if (banknum == 0) {	/* non-CFI boot flash */
-		info->portwidth = FLASH_CFI_8BIT;
-		info->chipwidth = FLASH_CFI_BY8;
-		info->interface = FLASH_CFI_X8;
-		return 1;
-	} else
-		return 0;
-}
diff --git a/board/faraday/a320evb/lowlevel_init.S b/board/faraday/a320evb/lowlevel_init.S
deleted file mode 100644
index d366260a80..0000000000
--- a/board/faraday/a320evb/lowlevel_init.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-
-#include <asm/macro.h>
-#include <faraday/ftsdmc020.h>
-
-/*
- * parameters for the SDRAM controller
- */
-#define TP0_A		(CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP0)
-#define TP1_A		(CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP1)
-#define CR_A		(CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_CR)
-#define B0_BSR_A	(CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_BANK0_BSR)
-#define ACR_A		(CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_ACR)
-
-#define TP0_D		CONFIG_SYS_FTSDMC020_TP0
-#define TP1_D		CONFIG_SYS_FTSDMC020_TP1
-#define CR_D1		FTSDMC020_CR_IPREC
-#define CR_D2		FTSDMC020_CR_ISMR
-#define CR_D3		FTSDMC020_CR_IREF
-
-#define B0_BSR_D	(CONFIG_SYS_FTSDMC020_BANK0_BSR | \
-			FTSDMC020_BANK_BASE(PHYS_SDRAM_1))
-#define ACR_D		FTSDMC020_ACR_TOC(0x18)
-
-/*
- * numeric 7 segment display
- */
-.macro	led, num
-	write32	CONFIG_DEBUG_LED, \num
-.endm
-
-/*
- * Waiting for SDRAM to set up
- */
-.macro	wait_sdram
-	ldr	r0, =CONFIG_FTSDMC020_BASE
-1:
-	ldr	r1, [r0, #FTSDMC020_OFFSET_CR]
-	cmp	r1, #0
-	bne	1b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
-	mov	r11, lr
-
-	led	0x0
-
-	bl	init_sdmc
-
-	led	0x1
-
-	/* everything is fine now */
-	mov	lr, r11
-	mov	pc, lr
-
-/*
- * memory initialization
- */
-init_sdmc:
-	led	0x10
-
-	/* set SDRAM register */
-
-	write32	TP0_A, TP0_D
-	led	0x11
-
-	write32	TP1_A, TP1_D
-	led	0x12
-
-	/* set to precharge */
-	write32	CR_A, CR_D1
-	led	0x13
-
-	wait_sdram
-	led	0x14
-
-	/* set mode register */
-	write32	CR_A, CR_D2
-	led	0x15
-
-	wait_sdram
-	led	0x16
-
-	/* set to refresh */
-	write32	CR_A, CR_D3
-	led	0x17
-
-	wait_sdram
-	led	0x18
-
-	write32	B0_BSR_A, B0_BSR_D
-	led	0x19
-
-	write32	ACR_A, ACR_D
-	led	0x1a
-
-	mov	pc, lr
diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c
index 6154c9c458..f43426991b 100644
--- a/board/freescale/common/ls102xa_stream_id.c
+++ b/board/freescale/common/ls102xa_stream_id.c
@@ -16,3 +16,18 @@ void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
 	for (i = 0; i < num; i++)
 		out_be32(scfg + id[i].offset, id[i].stream_id);
 }
+
+void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size)
+{
+	int i;
+	u32 liodn;
+
+	for (i = 0; i < size; i++) {
+		if (tbl[i].num_ids == 2)
+			liodn = (tbl[i].id[0] << 16) | tbl[i].id[1];
+		else
+			liodn = tbl[i].id[0];
+
+		out_le32((uint32_t *)(tbl[i].reg_offset), liodn);
+	}
+}
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 20eade4651..722b88f1e9 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -509,6 +509,25 @@ static struct csu_ns_dev ns_dev[] = {
 };
 #endif
 
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
+};
+
 struct smmu_stream_id dev_stream_id[] = {
 	{ 0x100, 0x01, "ETSEC MAC1" },
 	{ 0x104, 0x02, "ETSEC MAC2" },
@@ -541,6 +560,8 @@ int board_init(void)
 	config_serdes_mux();
 #endif
 
+	ls1021x_config_caam_stream_id(sec_liodn_tbl,
+				      ARRAY_SIZE(sec_liodn_tbl));
 	ls102xa_config_smmu_stream_id(dev_stream_id,
 				      ARRAY_SIZE(dev_stream_id));
 
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index bc8b00686c..fb8525fe59 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -401,6 +401,25 @@ static struct csu_ns_dev ns_dev[] = {
 };
 #endif
 
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
+	SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
+	SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
+};
+
 struct smmu_stream_id dev_stream_id[] = {
 	{ 0x100, 0x01, "ETSEC MAC1" },
 	{ 0x104, 0x02, "ETSEC MAC2" },
@@ -427,6 +446,8 @@ int board_init(void)
 #endif
 #endif
 
+	ls1021x_config_caam_stream_id(sec_liodn_tbl,
+				      ARRAY_SIZE(sec_liodn_tbl));
 	ls102xa_config_smmu_stream_id(dev_stream_id,
 				      ARRAY_SIZE(dev_stream_id));
 
diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2085a/ddr.c
index b4a3fc9a9e..4884fa24d0 100644
--- a/board/freescale/ls2085a/ddr.c
+++ b/board/freescale/ls2085a/ddr.c
@@ -77,6 +77,7 @@ found:
 		popts->data_bus_width = 1;
 		popts->otf_burst_chop_en = 0;
 		popts->burst_length = DDR_BL8;
+		popts->bstopre = 0;	/* enable auto precharge */
 	}
 	/*
 	 * Factors to consider for half-strength driver enable:
diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c
index 163a4c486a..519d61cb1e 100644
--- a/board/freescale/ls2085a/ls2085a.c
+++ b/board/freescale/ls2085a/ls2085a.c
@@ -12,7 +12,7 @@
 #include <asm/io.h>
 #include <fdt_support.h>
 #include <libfdt.h>
-#include <fsl_mc.h>
+#include <fsl-mc/fsl_mc.h>
 #include <environment.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -59,8 +59,15 @@ int timer_init(void)
 	u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
 	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
 
-	out_le32(cltbenr, 0x1);		/* enable cluster0 timebase */
-	out_le32(cntcr, 0x1);		/* enable clock for timer */
+	/* Enable timebase for all clusters.
+	 * It is safe to do so even some clusters are not enabled.
+	 */
+	out_le32(cltbenr, 0xf);
+
+	/* Enable clock for timer
+	 * This is a global setting.
+	 */
+	out_le32(cntcr, 0x1);
 
 	return 0;
 }
@@ -91,7 +98,21 @@ void fdt_fixup_board_enet(void *fdt)
 {
 	int offset;
 
-	offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+	offset = fdt_path_offset(fdt, "/fsl-mc");
+
+	/*
+	 * TODO: Remove this when backward compatibility
+	 * with old DT node (fsl,dprc@0) is no longer needed.
+	 */
+	if (offset < 0)
+		offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+
+	if (offset < 0) {
+		printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
+		       __func__, offset);
+		return;
+	}
+
 	if (get_mc_boot_status() == 0)
 		fdt_status_okay(fdt, offset);
 	else
diff --git a/board/gumstix/pepper/Kconfig b/board/gumstix/pepper/Kconfig
index 6f94612fe2..750db8585d 100644
--- a/board/gumstix/pepper/Kconfig
+++ b/board/gumstix/pepper/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "pepper"
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
 endif
diff --git a/board/in-circuit/grasshopper/grasshopper.c b/board/in-circuit/grasshopper/grasshopper.c
index 340b713188..91b41162de 100644
--- a/board/in-circuit/grasshopper/grasshopper.c
+++ b/board/in-circuit/grasshopper/grasshopper.c
@@ -18,14 +18,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
 	{
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
 				| MMU_VMR_CACHE_NONE,
 	}, {
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
 				| MMU_VMR_CACHE_WRBACK,
 	},
 };
@@ -53,6 +53,8 @@ int board_early_init_f(void)
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
 	portmux_enable_ebi(SDRAM_DATA_32BIT, 23, 0, PORTMUX_DRIVE_HIGH);
+	sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
 	portmux_enable_usart0(PORTMUX_DRIVE_MIN);
 	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 #if defined(CONFIG_MACB)
@@ -69,24 +71,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	unsigned long expected_size;
-	unsigned long actual_size;
-	void *sdram_base;
-
-	sdram_base = uncached(EBI_SDRAM_BASE);
-
-	expected_size = sdram_init(sdram_base, &sdram_config);
-	actual_size = get_ram_size(sdram_base, expected_size);
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-
-	return actual_size;
-}
-
 int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x00;
diff --git a/board/isee/igep0033/Kconfig b/board/isee/igep0033/Kconfig
index e989e4b15c..9a8421eb7a 100644
--- a/board/isee/igep0033/Kconfig
+++ b/board/isee/igep0033/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "am335x_igep0033"
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
 endif
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index e075f4687b..dcfefc46b3 100644
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -126,7 +126,8 @@ struct bfticu_iomap {
 #endif
 
 int ethernet_present(void);
-int ivm_read_eeprom(void);
+int ivm_read_eeprom(unsigned char *buf, int len);
+int ivm_analyze_eeprom(unsigned char *buf, int len);
 
 int trigger_fpga_config(void);
 int wait_for_fpga_config(void);
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index b6b19ccb8e..42db54221b 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -10,6 +10,8 @@
 #include <i2c.h>
 #include "common.h"
 
+#define MAC_STR_SZ	20
+
 static int ivm_calc_crc(unsigned char *buf, int len)
 {
 	const unsigned short crc_tab[16] = {
@@ -185,45 +187,37 @@ static int ivm_check_crc(unsigned char *buf, int block)
 	return 0;
 }
 
-static int calculate_mac_offset(unsigned char *valbuf, unsigned char *buf,
+/* take care of the possible MAC address offset and the IVM content offset */
+static int process_mac(unsigned char *valbuf, unsigned char *buf,
 				int offset)
 {
+	unsigned char mac[6];
 	unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6];
 
-	if (offset == 0)
-		return 0;
+	/* use an intermediate buffer, to not change IVM content
+	 * MAC address is at offset 1
+	 */
+	memcpy(mac, buf+1, 6);
 
-	val += offset;
-	buf[4] = (val >> 16) & 0xff;
-	buf[5] = (val >> 8) & 0xff;
-	buf[6] = val & 0xff;
-	sprintf((char *)valbuf, "%pM", buf + 1);
+	if (offset) {
+		val += offset;
+		mac[3] = (val >> 16) & 0xff;
+		mac[4] = (val >> 8) & 0xff;
+		mac[5] = val & 0xff;
+	}
+
+	sprintf((char *)valbuf, "%pM", mac);
 	return 0;
 }
 
 static int ivm_analyze_block2(unsigned char *buf, int len)
 {
-	unsigned char	valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
+	unsigned char	valbuf[MAC_STR_SZ];
 	unsigned long	count;
 
 	/* IVM_MAC Adress begins at offset 1 */
 	sprintf((char *)valbuf, "%pM", buf + 1);
 	ivm_set_value("IVM_MacAddress", (char *)valbuf);
-	/* if an offset is defined, add it */
-	calculate_mac_offset(buf, valbuf, CONFIG_PIGGY_MAC_ADRESS_OFFSET);
-#ifdef MACH_TYPE_KM_KIRKWOOD
-	setenv((char *)"ethaddr", (char *)valbuf);
-#else
-	if (getenv("ethaddr") == NULL)
-		setenv((char *)"ethaddr", (char *)valbuf);
-#endif
-#ifdef CONFIG_KMVECT1
-/* KMVECT1 has two ethernet interfaces */
-	if (getenv("eth1addr") == NULL) {
-		calculate_mac_offset(buf, valbuf, 1);
-		setenv((char *)"eth1addr", (char *)valbuf);
-	}
-#endif
 	/* IVM_MacCount */
 	count = (buf[10] << 24) +
 		   (buf[11] << 16) +
@@ -236,7 +230,7 @@ static int ivm_analyze_block2(unsigned char *buf, int len)
 	return 0;
 }
 
-static int ivm_analyze_eeprom(unsigned char *buf, int len)
+int ivm_analyze_eeprom(unsigned char *buf, int len)
 {
 	unsigned short	val;
 	unsigned char	valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
@@ -296,21 +290,44 @@ static int ivm_analyze_eeprom(unsigned char *buf, int len)
 	return 0;
 }
 
-int ivm_read_eeprom(void)
+static int ivm_populate_env(unsigned char *buf, int len)
+{
+	unsigned char	*page2;
+	unsigned char	valbuf[MAC_STR_SZ];
+
+	/* do we have the page 2 filled ? if not return */
+	if (ivm_check_crc(buf, 2))
+		return 0;
+	page2 = &buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN*2];
+
+	/* if an offset is defined, add it */
+	process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET);
+	if (getenv("ethaddr") == NULL)
+		setenv((char *)"ethaddr", (char *)valbuf);
+#ifdef CONFIG_KMVECT1
+/* KMVECT1 has two ethernet interfaces */
+	if (getenv("eth1addr") == NULL) {
+		process_mac(valbuf, page2, 1);
+		setenv((char *)"eth1addr", (char *)valbuf);
+	}
+#endif
+
+	return 0;
+}
+
+int ivm_read_eeprom(unsigned char *buf, int len)
 {
-	uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
 	int ret;
 
 	i2c_set_bus_num(CONFIG_KM_IVM_BUS);
 	/* add deblocking here */
 	i2c_make_abort();
 
-	ret = i2c_read(CONFIG_SYS_IVM_EEPROM_ADR, 0, 1, i2c_buffer,
-		CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+	ret = i2c_read(CONFIG_SYS_IVM_EEPROM_ADR, 0, 1, buf, len);
 	if (ret != 0) {
 		printf("Error reading EEprom\n");
 		return -2;
 	}
 
-	return ivm_analyze_eeprom(i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+	return ivm_populate_env(buf, len);
 }
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index bf84676b9b..c599b40936 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -18,6 +18,8 @@
 #include <i2c.h>
 #include "../common/common.h"
 
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
 /*
  * I/O Port configuration table
  *
@@ -393,9 +395,15 @@ int board_early_init_r(void)
 	return 0;
 }
 
+int misc_init_r(void)
+{
+	ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+	return 0;
+}
+
 int hush_init_var(void)
 {
-	ivm_read_eeprom();
+	ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
 	return 0;
 }
 
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index 1da0dcb9d8..89e9e1e57c 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -28,6 +28,8 @@
 
 #include "../common/common.h"
 
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
 const qe_iop_conf_t qe_iop_conf_tab[] = {
 	/* port pin dir open_drain assign */
 #if defined(CONFIG_MPC8360)
@@ -190,6 +192,7 @@ int board_early_init_r(void)
 
 int misc_init_r(void)
 {
+	ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
 	return 0;
 }
 
@@ -370,7 +373,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 #if defined(CONFIG_HUSH_INIT_VAR)
 int hush_init_var(void)
 {
-	ivm_read_eeprom();
+	ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
 	return 0;
 }
 #endif
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 1c7c108cb5..2938861f36 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -102,6 +102,8 @@ static const u32 kwmpp_config[] = {
 	0
 };
 
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
 #if defined(CONFIG_KM_MGCOGE3UN)
 /*
  * Wait for startup OK from mgcoge3ne
@@ -210,6 +212,8 @@ int misc_init_r(void)
 	}
 #endif
 
+	ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+
 	initialize_unit_leds();
 	set_km_env();
 	set_bootcount_addr();
@@ -419,7 +423,7 @@ void reset_phy(void)
 #if defined(CONFIG_HUSH_INIT_VAR)
 int hush_init_var(void)
 {
-	ivm_read_eeprom();
+	ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
 	return 0;
 }
 #endif
diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index a74f75bad4..eebb47fc21 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -26,6 +26,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
 int checkboard(void)
 {
 	printf("Board: Keymile %s\n", CONFIG_KM_BOARD_NAME);
@@ -195,13 +197,14 @@ int misc_init_r(void)
 		}
 	}
 
+	ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
 	return 0;
 }
 
 #if defined(CONFIG_HUSH_INIT_VAR)
 int hush_init_var(void)
 {
-	ivm_read_eeprom();
+	ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
 	return 0;
 }
 #endif
diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 2ad53ec2ab..f078295508 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -20,19 +20,19 @@
 
 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
 	{
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_NONE,
 	}, {
-		.virt_pgno	= EBI_SRAM_CS2_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SRAM_CS2_SIZE >> PAGE_SHIFT,
-		.phys		= (EBI_SRAM_CS2_BASE >> PAGE_SHIFT)
+		.virt_pgno	= EBI_SRAM_CS2_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SRAM_CS2_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (EBI_SRAM_CS2_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_NONE,
 	}, {
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_WRBACK,
 	},
 };
@@ -91,6 +91,8 @@ int board_early_init_f(void)
 
 	/* Enable 26 address bits and NCS2 */
 	portmux_enable_ebi(16, 26, PORTMUX_EBI_CS(2), PORTMUX_DRIVE_HIGH);
+	sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
 	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 
 	/* de-assert "force sys reset" pin */
@@ -151,24 +153,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	unsigned long expected_size;
-	unsigned long actual_size;
-	void *sdram_base;
-
-	sdram_base = uncached(EBI_SDRAM_BASE);
-
-	expected_size = sdram_init(sdram_base, &sdram_config);
-	actual_size = get_ram_size(sdram_base, expected_size);
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-
-	return actual_size;
-}
-
 int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c
index d82fee7b90..a0c7d3b323 100644
--- a/board/miromico/hammerhead/hammerhead.c
+++ b/board/miromico/hammerhead/hammerhead.c
@@ -21,14 +21,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
 	{
-		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
-		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_NONE,
 	}, {
-		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
-		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
-		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
+		.nr_pages	= EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
 					| MMU_VMR_CACHE_WRBACK,
 	},
 };
@@ -63,6 +63,8 @@ int board_early_init_f(void)
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
 	portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH);
+	sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
+
 	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 
 #if defined(CONFIG_MACB)
@@ -74,24 +76,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	unsigned long expected_size;
-	unsigned long actual_size;
-	void *sdram_base;
-
-	sdram_base = uncached(EBI_SDRAM_BASE);
-
-	expected_size = sdram_init(sdram_base, &sdram_config);
-	actual_size = get_ram_size(sdram_base, expected_size);
-
-	if (expected_size != actual_size)
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-		       actual_size >> 20, expected_size >> 20);
-
-	return actual_size;
-}
-
 int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x01;
diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S
index e25290966c..9d4ea1b3f9 100644
--- a/board/nokia/rx51/lowlevel_init.S
+++ b/board/nokia/rx51/lowlevel_init.S
@@ -37,7 +37,8 @@ ih_magic:		/* IH_MAGIC in big endian from include/image.h */
 
 .global save_boot_params
 save_boot_params:
-
+	/* Get return address */
+	ldr	lr, =save_boot_params_ret
 
 /* Copy valid attached kernel to address KERNEL_ADDRESS */
 
diff --git a/board/phytec/pcm051/Kconfig b/board/phytec/pcm051/Kconfig
index 2cc0d8872d..bb987156e6 100644
--- a/board/phytec/pcm051/Kconfig
+++ b/board/phytec/pcm051/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "pcm051"
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
 endif
diff --git a/board/raspberrypi/rpi/Makefile b/board/raspberrypi/rpi/Makefile
index c53c92b1dd..4ce2c983b3 100644
--- a/board/raspberrypi/rpi/Makefile
+++ b/board/raspberrypi/rpi/Makefile
@@ -1,15 +1,7 @@
 #
-# See file CREDITS for list of people who contributed to this
-# project.
+# (C) Copyright 2012 Stephen Warren
 #
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# SPDX-License-Identifier:	GPL-2.0
 #
 
 obj-y	:= rpi.o
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 948078b958..50a699bb9e 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -1,17 +1,7 @@
 /*
- * (C) Copyright 2012-2013 Stephen Warren
+ * (C) Copyright 2012-2013,2015 Stephen Warren
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier:	GPL-2.0
  */
 
 #include <common.h>
@@ -39,7 +29,11 @@ U_BOOT_DEVICE(bcm2835_gpios) = {
 };
 
 static const struct pl01x_serial_platdata serial_platdata = {
+#ifdef CONFIG_BCM2836
+	.base = 0x3f201000,
+#else
 	.base = 0x20201000,
+#endif
 	.type = TYPE_PL011,
 	.clock = 3000000,
 };
@@ -87,9 +81,20 @@ static const struct {
 } models[] = {
 	[0] = {
 		"Unknown model",
+#ifdef CONFIG_BCM2836
+		"bcm2836-rpi-other.dtb",
+#else
 		"bcm2835-rpi-other.dtb",
+#endif
 		false,
 	},
+#ifdef CONFIG_BCM2836
+	[BCM2836_BOARD_REV_2_B] = {
+		"2 Model B",
+		"bcm2836-rpi-2-b.dtb",
+		true,
+	},
+#else
 	[BCM2835_BOARD_REV_B_I2C0_2] = {
 		"Model B (no P5)",
 		"bcm2835-rpi-b-i2c0.dtb",
@@ -160,6 +165,7 @@ static const struct {
 		"bcm2835-rpi-a-plus.dtb",
 		false,
 	},
+#endif
 };
 
 u32 rpi_board_rev = 0;
@@ -267,7 +273,15 @@ static void get_board_rev(void)
 		return;
 	}
 
+	/*
+	 * For details of old-vs-new scheme, see:
+	 * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
+	 * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
+	 * (a few posts down)
+	 */
 	rpi_board_rev = msg->get_board_rev.body.resp.rev;
+	if (rpi_board_rev & 0x800000)
+		rpi_board_rev = (rpi_board_rev >> 4) & 0xff;
 	if (rpi_board_rev >= ARRAY_SIZE(models)) {
 		printf("RPI: Board rev %u outside known range\n",
 		       rpi_board_rev);
@@ -279,7 +293,7 @@ static void get_board_rev(void)
 	}
 
 	name = models[rpi_board_rev].name;
-	printf("RPI model: %s\n", name);
+	printf("RPI %s\n", name);
 }
 
 int board_init(void)
diff --git a/board/raspberrypi/rpi_2/Kconfig b/board/raspberrypi/rpi_2/Kconfig
new file mode 100644
index 0000000000..032184d5ad
--- /dev/null
+++ b/board/raspberrypi/rpi_2/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_RPI_2
+
+config SYS_BOARD
+	default "rpi_2"
+
+config SYS_VENDOR
+	default "raspberrypi"
+
+config SYS_SOC
+	default "bcm2835"
+
+config SYS_CONFIG_NAME
+	default "rpi_2"
+
+endif
diff --git a/board/raspberrypi/rpi_2/MAINTAINERS b/board/raspberrypi/rpi_2/MAINTAINERS
new file mode 100644
index 0000000000..85a480c9d1
--- /dev/null
+++ b/board/raspberrypi/rpi_2/MAINTAINERS
@@ -0,0 +1,6 @@
+RPI_2 BOARD
+M:	Stephen Warren <swarren@wwwdotorg.org>
+S:	Maintained
+F:	board/raspberrypi/rpi_2/
+F:	include/configs/rpi_2.h
+F:	configs/rpi_2_defconfig
diff --git a/board/raspberrypi/rpi_2/Makefile b/board/raspberrypi/rpi_2/Makefile
new file mode 100644
index 0000000000..d82cd21f4c
--- /dev/null
+++ b/board/raspberrypi/rpi_2/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2012,2015 Stephen Warren
+#
+# SPDX-License-Identifier:	GPL-2.0
+#
+
+obj-y	:= ../rpi/rpi.o
diff --git a/board/renesas/silk/Kconfig b/board/renesas/silk/Kconfig
new file mode 100644
index 0000000000..07aee0e50f
--- /dev/null
+++ b/board/renesas/silk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_SILK
+
+config SYS_BOARD
+	default "silk"
+
+config SYS_VENDOR
+	default "renesas"
+
+config SYS_CONFIG_NAME
+	default "silk"
+
+endif
diff --git a/board/renesas/silk/MAINTAINERS b/board/renesas/silk/MAINTAINERS
new file mode 100644
index 0000000000..b566ccfbd9
--- /dev/null
+++ b/board/renesas/silk/MAINTAINERS
@@ -0,0 +1,6 @@
+SILK BOARD
+M:	Cogent Embedded, Inc. <source@cogentembedded.com>
+S:	Maintained
+F:	board/renesas/silk/
+F:	include/configs/silk.h
+F:	configs/silk_defconfig
diff --git a/board/renesas/silk/Makefile b/board/renesas/silk/Makefile
new file mode 100644
index 0000000000..e6eea6142e
--- /dev/null
+++ b/board/renesas/silk/Makefile
@@ -0,0 +1,10 @@
+#
+# board/renesas/silk/Makefile
+#
+# Copyright (C) 2015 Renesas Electronics Corporation
+# Copyright (C) 2015 Cogent Embedded, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y	:= silk.o qos.o ../rcar-gen2-common/common.o
diff --git a/board/renesas/silk/qos.c b/board/renesas/silk/qos.c
new file mode 100644
index 0000000000..4f6e46ce52
--- /dev/null
+++ b/board/renesas/silk/qos.c
@@ -0,0 +1,951 @@
+/*
+ * board/renesas/silk/qos.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/rmobile.h>
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+/* QoS version 0.11 */
+
+enum {
+	DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
+	DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09,
+	DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14,
+	DBSC3_15,
+	DBSC3_NR,
+};
+
+static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = {
+	[DBSC3_00] = DBSC3_0_QOS_R0_BASE,
+	[DBSC3_01] = DBSC3_0_QOS_R1_BASE,
+	[DBSC3_02] = DBSC3_0_QOS_R2_BASE,
+	[DBSC3_03] = DBSC3_0_QOS_R3_BASE,
+	[DBSC3_04] = DBSC3_0_QOS_R4_BASE,
+	[DBSC3_05] = DBSC3_0_QOS_R5_BASE,
+	[DBSC3_06] = DBSC3_0_QOS_R6_BASE,
+	[DBSC3_07] = DBSC3_0_QOS_R7_BASE,
+	[DBSC3_08] = DBSC3_0_QOS_R8_BASE,
+	[DBSC3_09] = DBSC3_0_QOS_R9_BASE,
+	[DBSC3_10] = DBSC3_0_QOS_R10_BASE,
+	[DBSC3_11] = DBSC3_0_QOS_R11_BASE,
+	[DBSC3_12] = DBSC3_0_QOS_R12_BASE,
+	[DBSC3_13] = DBSC3_0_QOS_R13_BASE,
+	[DBSC3_14] = DBSC3_0_QOS_R14_BASE,
+	[DBSC3_15] = DBSC3_0_QOS_R15_BASE,
+};
+
+static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = {
+	[DBSC3_00] = DBSC3_0_QOS_W0_BASE,
+	[DBSC3_01] = DBSC3_0_QOS_W1_BASE,
+	[DBSC3_02] = DBSC3_0_QOS_W2_BASE,
+	[DBSC3_03] = DBSC3_0_QOS_W3_BASE,
+	[DBSC3_04] = DBSC3_0_QOS_W4_BASE,
+	[DBSC3_05] = DBSC3_0_QOS_W5_BASE,
+	[DBSC3_06] = DBSC3_0_QOS_W6_BASE,
+	[DBSC3_07] = DBSC3_0_QOS_W7_BASE,
+	[DBSC3_08] = DBSC3_0_QOS_W8_BASE,
+	[DBSC3_09] = DBSC3_0_QOS_W9_BASE,
+	[DBSC3_10] = DBSC3_0_QOS_W10_BASE,
+	[DBSC3_11] = DBSC3_0_QOS_W11_BASE,
+	[DBSC3_12] = DBSC3_0_QOS_W12_BASE,
+	[DBSC3_13] = DBSC3_0_QOS_W13_BASE,
+	[DBSC3_14] = DBSC3_0_QOS_W14_BASE,
+	[DBSC3_15] = DBSC3_0_QOS_W15_BASE,
+};
+
+void qos_init(void)
+{
+	int i;
+	struct rcar_s3c *s3c;
+	struct rcar_s3c_qos *s3c_qos;
+	struct rcar_dbsc3_qos *qos_addr;
+	struct rcar_mxi *mxi;
+	struct rcar_mxi_qos *mxi_qos;
+	struct rcar_axi_qos *axi_qos;
+
+	/* DBSC DBADJ2 */
+	writel(0x20042004, DBSC3_0_DBADJ2);
+
+	/* S3C -QoS */
+	s3c = (struct rcar_s3c *)S3C_BASE;
+	writel(0x1F0D0B0A, &s3c->s3crorr);
+	writel(0x1F0D0B09, &s3c->s3cworr);
+
+	/* QoS Control Registers */
+	s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE;
+	writel(0x00890089, &s3c_qos->s3cqos0);
+	writel(0x20960010, &s3c_qos->s3cqos1);
+	writel(0x20302030, &s3c_qos->s3cqos2);
+	writel(0x20AA2200, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20960010, &s3c_qos->s3cqos5);
+	writel(0x20302030, &s3c_qos->s3cqos6);
+	writel(0x20AA2200, &s3c_qos->s3cqos7);
+	writel(0x00002032, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE;
+	writel(0x00890089, &s3c_qos->s3cqos0);
+	writel(0x20960010, &s3c_qos->s3cqos1);
+	writel(0x20302030, &s3c_qos->s3cqos2);
+	writel(0x20AA2200, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20960010, &s3c_qos->s3cqos5);
+	writel(0x20302030, &s3c_qos->s3cqos6);
+	writel(0x20AA2200, &s3c_qos->s3cqos7);
+	writel(0x00002032, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE;
+	writel(0x80928092, &s3c_qos->s3cqos0);
+	writel(0x20960020, &s3c_qos->s3cqos1);
+	writel(0x20302030, &s3c_qos->s3cqos2);
+	writel(0x20AA20DC, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20960020, &s3c_qos->s3cqos5);
+	writel(0x20302030, &s3c_qos->s3cqos6);
+	writel(0x20AA20DC, &s3c_qos->s3cqos7);
+	writel(0x00002032, &s3c_qos->s3cqos8);
+
+	s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE;
+	writel(0x00820082, &s3c_qos->s3cqos0);
+	writel(0x20960020, &s3c_qos->s3cqos1);
+	writel(0x20302030, &s3c_qos->s3cqos2);
+	writel(0x20AA20FA, &s3c_qos->s3cqos3);
+	writel(0x00002032, &s3c_qos->s3cqos4);
+	writel(0x20960020, &s3c_qos->s3cqos5);
+	writel(0x20302030, &s3c_qos->s3cqos6);
+	writel(0x20AA20FA, &s3c_qos->s3cqos7);
+	writel(0x00002032, &s3c_qos->s3cqos8);
+
+	/* DBSC -QoS */
+	/* DBSC0 - Read */
+	for (i = DBSC3_00; i < DBSC3_NR; i++) {
+		qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+		writel(0x00000002, &qos_addr->dblgcnt);
+		writel(0x0000207D, &qos_addr->dbtmval0);
+		writel(0x00002053, &qos_addr->dbtmval1);
+		writel(0x0000202A, &qos_addr->dbtmval2);
+		writel(0x00001FBD, &qos_addr->dbtmval3);
+		writel(0x00000001, &qos_addr->dbrqctr);
+		writel(0x00002064, &qos_addr->dbthres0);
+		writel(0x0000203E, &qos_addr->dbthres1);
+		writel(0x00002019, &qos_addr->dbthres2);
+		writel(0x00000001, &qos_addr->dblgqon);
+	}
+
+	/* DBSC0 - Write */
+	for (i = DBSC3_00; i < DBSC3_NR; i++) {
+		qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
+		writel(0x00000002, &qos_addr->dblgcnt);
+		writel(0x0000207D, &qos_addr->dbtmval0);
+		writel(0x00002053, &qos_addr->dbtmval1);
+		writel(0x00002043, &qos_addr->dbtmval2);
+		writel(0x00002030, &qos_addr->dbtmval3);
+		writel(0x00000001, &qos_addr->dbrqctr);
+		writel(0x00002064, &qos_addr->dbthres0);
+		writel(0x0000203E, &qos_addr->dbthres1);
+		writel(0x00002031, &qos_addr->dbthres2);
+		writel(0x00000001, &qos_addr->dblgqon);
+	}
+
+	/* CCI-400 -QoS */
+	writel(0x20000800, CCI_400_MAXOT_1);
+	writel(0x20000800, CCI_400_MAXOT_2);
+	writel(0x0000000C, CCI_400_QOSCNTL_1);
+	writel(0x0000000C, CCI_400_QOSCNTL_2);
+
+	/* MXI -QoS */
+	/* Transaction Control (MXI) */
+	mxi = (struct rcar_mxi *)MXI_BASE;
+	writel(0x00000013, &mxi->mxrtcr);
+	writel(0x00000013, &mxi->mxwtcr);
+	writel(0x00780080, &mxi->mxsaar0);
+	writel(0x02000800, &mxi->mxsaar1);
+
+	/* QoS Control (MXI) */
+	mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE;
+	writel(0x0000000C, &mxi_qos->vspdu0);
+	writel(0x0000000E, &mxi_qos->du0);
+
+	/* AXI -QoS */
+	/* Transaction Control (MXI) */
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000214C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002029, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000214C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000214C, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x000020A6, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (RT-AXI) */
+	axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (MP-AXI) */
+	axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002037, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000040, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002014, &axi_qos->qosctset0);
+	writel(0x00000040, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00001FF0, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00002001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x00002053, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE;
+	writel(0x00000000, &axi_qos->qosconf);
+	writel(0x0000206E, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (SYS-AXI256) */
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x000020EB, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x000020EB, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x000020EB, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x000020EB, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (CCI-AXI) */
+	axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x00002245, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002004, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000000, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	/* QoS Register (Media-AXI) */
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x000020DC, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x000020AA, &axi_qos->qosthres0);
+	writel(0x00002032, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE;
+	writel(0x00000002, &axi_qos->qosconf);
+	writel(0x000020DC, &axi_qos->qosctset0);
+	writel(0x00002096, &axi_qos->qosctset1);
+	writel(0x00002030, &axi_qos->qosctset2);
+	writel(0x00002030, &axi_qos->qosctset3);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x000020AA, &axi_qos->qosthres0);
+	writel(0x00002032, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00000001, &axi_qos->qosthres0);
+	writel(0x00000001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00000001, &axi_qos->qosthres0);
+	writel(0x00000001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002190, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00000001, &axi_qos->qosthres0);
+	writel(0x00000001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00001FF0, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00002001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00000001, &axi_qos->qosthres0);
+	writel(0x00000001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00000001, &axi_qos->qosthres0);
+	writel(0x00000001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+	writel(0x00000003, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+	writel(0x00000003, &axi_qos->qosconf);
+	writel(0x000020C8, &axi_qos->qosctset0);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE;
+	writel(0x00000003, &axi_qos->qosconf);
+	writel(0x00002063, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE;
+	writel(0x00000003, &axi_qos->qosconf);
+	writel(0x00002063, &axi_qos->qosctset0);
+	writel(0x00000001, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00000001, &axi_qos->qosthres0);
+	writel(0x00000001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00000001, &axi_qos->qosthres0);
+	writel(0x00000001, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+
+	axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+	writel(0x00000001, &axi_qos->qosconf);
+	writel(0x00002073, &axi_qos->qosctset0);
+	writel(0x00000020, &axi_qos->qosreqctr);
+	writel(0x00002064, &axi_qos->qosthres0);
+	writel(0x00002004, &axi_qos->qosthres1);
+	writel(0x00000001, &axi_qos->qosthres2);
+	writel(0x00000001, &axi_qos->qosqon);
+}
+#else /* CONFIG_RMOBILE_EXTRAM_BOOT */
+void qos_init(void)
+{
+}
+#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */
diff --git a/board/renesas/silk/qos.h b/board/renesas/silk/qos.h
new file mode 100644
index 0000000000..75a20bb075
--- /dev/null
+++ b/board/renesas/silk/qos.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __QOS_H__
+#define __QOS_H__
+
+void qos_init(void);
+
+#endif
diff --git a/board/renesas/silk/silk.c b/board/renesas/silk/silk.c
new file mode 100644
index 0000000000..dfd9a9d3e4
--- /dev/null
+++ b/board/renesas/silk/silk.c
@@ -0,0 +1,163 @@
+/*
+ * board/renesas/silk/silk.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <asm/arch/mmc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <i2c.h>
+#include <div64.h>
+#include "qos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CLK2MHZ(clk)	(clk / 1000 / 1000)
+void s_init(void)
+{
+	struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
+	struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
+
+	/* Watchdog init */
+	writel(0xA5A5A500, &rwdt->rwtcsra);
+	writel(0xA5A5A500, &swdt->swtcsra);
+
+	/* QoS */
+	qos_init();
+}
+
+#define TMU0_MSTP125	(1 << 25)
+#define SCIF2_MSTP719	(1 << 19)
+#define ETHER_MSTP813	(1 << 13)
+#define IIC1_MSTP323	(1 << 23)
+#define MMC0_MSTP315	(1 << 15)
+
+int board_early_init_f(void)
+{
+	/* TMU */
+	mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+
+	/* SCIF2 */
+	mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
+
+	/* ETHER */
+	mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
+
+	/* IIC1 / sh-i2c ch1 */
+	mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
+
+#ifdef CONFIG_SH_MMCIF
+	/* MMC */
+	mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
+#endif
+	return 0;
+}
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	/* Init PFC controller */
+	r8a7794_pinmux_init();
+
+	/* Ether Enable */
+	gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
+	gpio_request(GPIO_FN_ETH_RX_ER, NULL);
+	gpio_request(GPIO_FN_ETH_RXD0, NULL);
+	gpio_request(GPIO_FN_ETH_RXD1, NULL);
+	gpio_request(GPIO_FN_ETH_LINK, NULL);
+	gpio_request(GPIO_FN_ETH_REFCLK, NULL);
+	gpio_request(GPIO_FN_ETH_MDIO, NULL);
+	gpio_request(GPIO_FN_ETH_TXD1, NULL);
+	gpio_request(GPIO_FN_ETH_TX_EN, NULL);
+	gpio_request(GPIO_FN_ETH_MAGIC, NULL);
+	gpio_request(GPIO_FN_ETH_TXD0, NULL);
+	gpio_request(GPIO_FN_ETH_MDC, NULL);
+	gpio_request(GPIO_FN_IRQ8, NULL);
+
+	/* PHY reset */
+	gpio_request(GPIO_GP_1_24, NULL);
+	gpio_direction_output(GPIO_GP_1_24, 0);
+	mdelay(20);
+	gpio_set_value(GPIO_GP_1_24, 1);
+	udelay(1);
+
+	return 0;
+}
+
+#define CXR24 0xEE7003C0 /* MAC address high register */
+#define CXR25 0xEE7003C8 /* MAC address low register */
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SH_ETHER
+	int ret = -ENODEV;
+	u32 val;
+	unsigned char enetaddr[6];
+
+	ret = sh_eth_initialize(bis);
+	if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+		return ret;
+
+	/* Set Mac address */
+	val = enetaddr[0] << 24 | enetaddr[1] << 16 |
+		enetaddr[2] << 8 | enetaddr[3];
+	writel(val, CXR24);
+
+	val = enetaddr[4] << 8 | enetaddr[5];
+	writel(val, CXR25);
+
+	return ret;
+#else
+	return 0;
+#endif
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int ret = 0;
+
+#ifdef CONFIG_SH_MMCIF
+	/* MMC0 */
+	gpio_request(GPIO_GP_4_31, NULL);
+	gpio_set_value(GPIO_GP_4_31, 1);
+
+	ret = mmcif_mmc_init();
+#endif
+	return ret;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+	CONFIG_RMOBILE_BOARD_STRING
+};
+
+void reset_cpu(ulong addr)
+{
+	u8 val;
+
+	i2c_set_bus_num(1); /* PowerIC connected to ch1 */
+	i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+	val |= 0x02;
+	i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+}
diff --git a/board/ronetix/pm9261/Kconfig b/board/ronetix/pm9261/Kconfig
index a4934c582e..8c54198102 100644
--- a/board/ronetix/pm9261/Kconfig
+++ b/board/ronetix/pm9261/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "ronetix"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "pm9261"
 
diff --git a/board/ronetix/pm9263/Kconfig b/board/ronetix/pm9263/Kconfig
index 339a6ea169..5b47d34845 100644
--- a/board/ronetix/pm9263/Kconfig
+++ b/board/ronetix/pm9263/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "ronetix"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "pm9263"
 
diff --git a/board/ronetix/pm9g45/Kconfig b/board/ronetix/pm9g45/Kconfig
index 65fc5c4838..ad5309f816 100644
--- a/board/ronetix/pm9g45/Kconfig
+++ b/board/ronetix/pm9g45/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "ronetix"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "pm9g45"
 
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index 8b4c8e9a9d..da2245ff9d 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -355,3 +355,31 @@ int misc_init_r(void)
 	return 0;
 }
 #endif
+
+void reset_misc(void)
+{
+	struct gpio_desc gpio = {};
+	int node;
+
+	node = fdt_node_offset_by_compatible(gd->fdt_blob, 0,
+			"samsung,emmc-reset");
+	if (node < 0)
+		return;
+
+	gpio_request_by_name_nodev(gd->fdt_blob, node, "reset-gpio", 0, &gpio,
+				   GPIOD_IS_OUT);
+
+	if (dm_gpio_is_valid(&gpio)) {
+		/*
+		 * Reset eMMC
+		 *
+		 * FIXME: Need to optimize delay time. Minimum 1usec pulse is
+		 *	  required by 'JEDEC Standard No.84-A441' (eMMC)
+		 *	  document but real delay time is expected to greater
+		 *	  than 1usec.
+		 */
+		dm_gpio_set_value(&gpio, 0);
+		mdelay(10);
+		dm_gpio_set_value(&gpio, 1);
+	}
+}
diff --git a/board/samsung/goni/Kconfig b/board/samsung/goni/Kconfig
index cbbf5a9315..006e864e0b 100644
--- a/board/samsung/goni/Kconfig
+++ b/board/samsung/goni/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "s5p_goni"
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
 endif
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index e3517f2eb2..bff6ac928c 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -248,12 +248,12 @@ static void board_clock_init(void)
 	 * MOUTc2c = 800 Mhz
 	 * MOUTpwi = 108 MHz
 	 *
-	 * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 400 (1)
+	 * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 200 (3)
 	 * sclk_c2c = MOUTc2c / (ratio + 1) = 400 (1)
 	 * aclk_c2c = sclk_c2c / (ratio + 1) = 200 (1)
 	 * sclk_pwi = MOUTpwi / (ratio + 1) = 18 (5)
 	 */
-	set = G2D_ACP_RATIO(1) | C2C_RATIO(1) | PWI_RATIO(5) |
+	set = G2D_ACP_RATIO(3) | C2C_RATIO(1) | PWI_RATIO(5) |
 	      C2C_ACLK_RATIO(1) | DVSEM_RATIO(1) | DPM_RATIO(1);
 
 	clrsetbits_le32(&clk->div_dmc1, clr, set);
@@ -503,11 +503,3 @@ int board_usb_init(int index, enum usb_init_type init)
 	return s3c_udc_probe(&s5pc210_otg_data);
 }
 #endif
-
-void reset_misc(void)
-{
-	/* Reset eMMC*/
-	gpio_set_value(EXYNOS4X12_GPIO_K12, 0);
-	mdelay(10);
-	gpio_set_value(EXYNOS4X12_GPIO_K12, 1);
-}
diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig
index a9d62fffa5..576abaea69 100644
--- a/board/samsung/smdk5420/Kconfig
+++ b/board/samsung/smdk5420/Kconfig
@@ -22,6 +22,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "peach-pi"
 
+config DM_CROS_EC
+	default y
+
 endif
 
 if TARGET_PEACH_PIT
@@ -35,6 +38,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "peach-pit"
 
+config DM_CROS_EC
+	default y
+
 endif
 
 if TARGET_SMDK5420
diff --git a/board/samsung/smdkc100/Kconfig b/board/samsung/smdkc100/Kconfig
index d2157b4d05..ea87166d03 100644
--- a/board/samsung/smdkc100/Kconfig
+++ b/board/samsung/smdkc100/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "smdkc100"
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
 endif
diff --git a/board/siemens/corvus/Kconfig b/board/siemens/corvus/Kconfig
index 7b505aac36..69fe0f0723 100644
--- a/board/siemens/corvus/Kconfig
+++ b/board/siemens/corvus/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "siemens"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "corvus"
 
diff --git a/board/siemens/taurus/Kconfig b/board/siemens/taurus/Kconfig
index c07d244bc3..cf71e4ce56 100644
--- a/board/siemens/taurus/Kconfig
+++ b/board/siemens/taurus/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "siemens"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "taurus"
 
diff --git a/board/silica/pengwyn/Kconfig b/board/silica/pengwyn/Kconfig
index f2e1098f62..2e9a2b303f 100644
--- a/board/silica/pengwyn/Kconfig
+++ b/board/silica/pengwyn/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "pengwyn"
 
+config DM
+	default y
+
+config DM_GPIO
+	default y
+
+config DM_SERIAL
+	default y
+
 endif
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 4a2158988f..9cf54e51ac 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -149,6 +149,16 @@ config SPL_FEL
 	bool "SPL/FEL mode support"
 	depends on SPL
 	default n
+	help
+	  This enables support for Fast Early Loader (FEL) mode. This
+	  allows U-Boot to be loaded to the board over USB by the on-chip
+	  boot rom. U-Boot should be sent in two parts: SPL first, with
+	  'fel write 0x2000 u-boot-spl.bin; fel exe 0x2000' then U-Boot with
+	  'fel write 0x4a000000 u-boot.bin; fel exe 0x4a000000'. This option
+	  shrinks the amount of SRAM available to SPL, so only enable it if
+	  you need FEL. Note that enabling this option only allows FEL to be
+	  used; it is still possible to boot U-Boot from boot media. U-Boot
+	  SPL detects when it is being loaded using FEL.
 
 config UART0_PORT_F
 	bool "UART0 on MicroSD breakout board"
@@ -213,6 +223,14 @@ config USB0_VBUS_PIN
 	Set the Vbus enable pin for usb0 (otg). This takes a string in the
 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config USB0_VBUS_DET
+	string "Vbus detect pin for usb0 (otg)"
+	depends on USB_MUSB_SUNXI
+	default ""
+	---help---
+	Set the Vbus detect pin for usb0 (otg). This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 config USB1_VBUS_PIN
 	string "Vbus enable pin for usb1 (ehci0)"
 	default "PH6" if MACH_SUN4I || MACH_SUN7I
@@ -302,6 +320,14 @@ config VIDEO_LCD_POWER
 	Set the power enable pin for the LCD panel. This takes a string in the
 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config VIDEO_LCD_RESET
+	string "LCD panel reset pin"
+	depends on VIDEO
+	default ""
+	---help---
+	Set the reset pin for the LCD panel. This takes a string in the format
+	understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 config VIDEO_LCD_BL_EN
 	string "LCD panel backlight enable pin"
 	depends on VIDEO
@@ -326,6 +352,30 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW
 	---help---
 	Set this if the backlight pwm output is active low.
 
+config VIDEO_LCD_PANEL_I2C
+	bool "LCD panel needs to be configured via i2c"
+	depends on VIDEO
+	default m
+	---help---
+	Say y here if the LCD panel needs to be configured via i2c. This
+	will add a bitbang i2c controller using gpios to talk to the LCD.
+
+config VIDEO_LCD_PANEL_I2C_SDA
+	string "LCD panel i2c interface SDA pin"
+	depends on VIDEO_LCD_PANEL_I2C
+	default "PG12"
+	---help---
+	Set the SDA pin for the LCD i2c interface. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_PANEL_I2C_SCL
+	string "LCD panel i2c interface SCL pin"
+	depends on VIDEO_LCD_PANEL_I2C
+	default "PG10"
+	---help---
+	Set the SCL pin for the LCD i2c interface. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 
 # Note only one of these may be selected at a time! But hidden choices are
 # not supported by Kconfig
@@ -364,6 +414,14 @@ config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
 	---help---
 	7.85" 1024x768 Hitachi tx18d42vm LCD panel support
 
+config VIDEO_LCD_TL059WV5C0
+	bool "tl059wv5c0 LCD panel"
+	select VIDEO_LCD_PANEL_I2C
+	select VIDEO_LCD_IF_PARALLEL
+	---help---
+	6" 480x800 tl059wv5c0 panel support, as used on the Utoo P66 and
+	Aigo M60/M608/M606 tablets.
+
 endchoice
 
 
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index faa413cb06..9a287d3c30 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -46,6 +46,11 @@ S:	Maintained
 F:	board/sunxi/dram_a20_olinuxino_l2.c
 F:	configs/A20-OLinuXino-Lime2_defconfig
 
+AMPE A76 BOARD
+M:	Paul Kocialkowski <contact@paulk.fr>
+S:	Maintained
+F:	configs/Ampe_A76_defconfig
+
 COLOMBUS BOARD
 M:	Maxime Ripard <maxime.ripard@free-electrons.com>
 S:	Maintained
@@ -57,9 +62,7 @@ M:	Hans de Goede <hdegoede@redhat.com>
 S:	Maintained
 F:	include/configs/sun7i.h
 F:	configs/Cubieboard2_defconfig
-F:	configs/Cubieboard2_FEL_defconfig
 F:	configs/Cubietruck_defconfig
-F:	configs/Cubietruck_FEL_defconfig
 
 GEMEI-G9 TABLET
 M:	Priit Laes <plaes@plaes.org>
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index b70e00ce6b..e1891d198e 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -33,6 +33,12 @@
 #include <linux/usb/musb.h>
 #include <net.h>
 
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
+int soft_i2c_gpio_sda;
+int soft_i2c_gpio_scl;
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /* add board specific code here */
@@ -152,6 +158,10 @@ void i2c_init_board(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB0_TWI0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB0_TWI0);
 	clock_twi_onoff(0, 1);
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+	soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
+	soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
+#endif
 }
 
 #ifdef CONFIG_SPL_BUILD
diff --git a/board/syteco/jadecpu/Kconfig b/board/syteco/jadecpu/Kconfig
deleted file mode 100644
index 6e9392e21f..0000000000
--- a/board/syteco/jadecpu/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_JADECPU
-
-config SYS_BOARD
-	default "jadecpu"
-
-config SYS_VENDOR
-	default "syteco"
-
-config SYS_SOC
-	default "mb86r0x"
-
-config SYS_CONFIG_NAME
-	default "jadecpu"
-
-endif
diff --git a/board/syteco/jadecpu/MAINTAINERS b/board/syteco/jadecpu/MAINTAINERS
deleted file mode 100644
index b53e7cad42..0000000000
--- a/board/syteco/jadecpu/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-JADECPU BOARD
-M:	Matthias Weisser <weisserm@arcor.de>
-S:	Maintained
-F:	board/syteco/jadecpu/
-F:	include/configs/jadecpu.h
-F:	configs/jadecpu_defconfig
diff --git a/board/syteco/jadecpu/Makefile b/board/syteco/jadecpu/Makefile
deleted file mode 100644
index 74264361e5..0000000000
--- a/board/syteco/jadecpu/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= jadecpu.o
-obj-y	+= lowlevel_init.o
diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c
deleted file mode 100644
index 6c60a41e3d..0000000000
--- a/board/syteco/jadecpu/jadecpu.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (c) 2010 Graf-Syteco, Matthias Weisser
- * <weisserm@arcor.de>
- *
- * (C) Copyright 2007, mycable GmbH
- * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/mb86r0x.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	struct mb86r0x_ccnt * ccnt = (struct mb86r0x_ccnt *)
-					MB86R0x_CCNT_BASE;
-
-	/* We select mode 0 for group 2 and mode 1 for group 4 */
-	writel(0x00000010, &ccnt->cmux_md);
-
-	gd->flags = 0;
-	gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000;
-
-	icache_enable();
-	dcache_enable();
-
-	return 0;
-}
-
-static void setup_display_power(uint32_t pwr_bit, char *pwm_opts,
-				unsigned long pwm_base)
-{
-	struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
-					MB86R0x_GPIO_BASE;
-	struct mb86r0x_pwm *pwm = (struct mb86r0x_pwm *) pwm_base;
-	const char *e;
-
-	writel(readl(&gpio->gpdr2) | pwr_bit, &gpio->gpdr2);
-
-	e = getenv(pwm_opts);
-	if (e != NULL) {
-		const char *s;
-		uint32_t freq, init;
-
-		freq = 0;
-		init = 0;
-
-		s = strchr(e, 'f');
-		if (s != NULL)
-			freq = simple_strtol(s + 2, NULL, 0);
-
-		s = strchr(e, 'i');
-		if (s != NULL)
-			init = simple_strtol(s + 2, NULL, 0);
-
-		if (freq > 0) {
-			writel(CONFIG_MB86R0x_IOCLK / 1000 / freq,
-				&pwm->bcr);
-			writel(1002, &pwm->tpr);
-			writel(1, &pwm->pr);
-			writel(init * 10 + 1, &pwm->dr);
-			writel(1, &pwm->cr);
-			writel(1, &pwm->sr);
-		}
-	}
-}
-
-int board_late_init(void)
-{
-	struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
-					MB86R0x_GPIO_BASE;
-	uint32_t in_word;
-
-#ifdef CONFIG_VIDEO_MB86R0xGDC
-	/* Check if we have valid display settings and turn on power if so */
-	/* Display 0 */
-	if (getenv("gs_dsp_0_param") || getenv("videomode"))
-		setup_display_power((1 << 3), "gs_dsp_0_pwm",
-					MB86R0x_PWM0_BASE);
-
-	/* The corresponding GPIO is always an output */
-	writel(readl(&gpio->gpddr2) | (1 << 3), &gpio->gpddr2);
-
-	/* Display 1 */
-	if (getenv("gs_dsp_1_param") || getenv("videomode1"))
-		setup_display_power((1 << 4), "gs_dsp_1_pwm",
-					MB86R0x_PWM1_BASE);
-
-	/* The corresponding GPIO is always an output */
-	writel(readl(&gpio->gpddr2) | (1 << 4), &gpio->gpddr2);
-#endif /* CONFIG_VIDEO_MB86R0xGDC */
-
-	/* 5V enable */
-	writel(readl(&gpio->gpdr1) & ~(1 << 5), &gpio->gpdr1);
-	writel(readl(&gpio->gpddr1) | (1 << 5), &gpio->gpddr1);
-
-	/* We have special boot options if told by GPIOs */
-	in_word = readl(&gpio->gpdr1);
-
-	if ((in_word & 0xC0) == 0xC0) {
-		setenv("stdin", "serial");
-		setenv("stdout", "serial");
-		setenv("stderr", "serial");
-		setenv("preboot", "run gs_slow_boot");
-	} else if ((in_word & 0xC0) != 0) {
-		setenv("stdout", "vga");
-		setenv("preboot", "run gs_slow_boot");
-	} else {
-		setenv("stdin", "serial");
-		setenv("stdout", "serial");
-		setenv("stderr", "serial");
-		if (getenv("gs_devel")) {
-			setenv("preboot", "run gs_slow_boot");
-		} else {
-			setenv("preboot", "run gs_fast_boot");
-		}
-	}
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	return 0;
-}
-
-/*
- * DRAM configuration
- */
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
-					PHYS_SDRAM_SIZE);
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}
diff --git a/board/syteco/jadecpu/lowlevel_init.S b/board/syteco/jadecpu/lowlevel_init.S
deleted file mode 100644
index 9568cec9a8..0000000000
--- a/board/syteco/jadecpu/lowlevel_init.S
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2007, mycable GmbH
- * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
- *
- * (C) Copyright 2003, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/macro.h>
-#include <asm/arch/mb86r0x.h>
-#include <generated/asm-offsets.h>
-
-/* Set up the platform, once the cpu has been initialized */
-.globl lowlevel_init
-lowlevel_init:
-/*
- * Initialize Clock Reset Generator (CRG)
- */
-
-	ldr		r0, =MB86R0x_CRG_BASE
-
-	/* Not change the initial value that is set by external pin.*/
-WAIT_PLL:
-	ldr		r2, [r0, #CRG_CRPR]	/* Wait for PLLREADY */
-	tst		r2, #MB86R0x_CRG_CRPR_PLLRDY
-	beq		WAIT_PLL
-
-	/* Set clock gate control */
-	ldr		r1, =CONFIG_SYS_CRG_CRHA_INIT
-	str		r1, [r0, #CRG_CRHA]
-	ldr		r1, =CONFIG_SYS_CRG_CRPA_INIT
-	str		r1, [r0, #CRG_CRPA]
-	ldr		r1, =CONFIG_SYS_CRG_CRPB_INIT
-	str		r1, [r0, #CRG_CRPB]
-	ldr		r1, =CONFIG_SYS_CRG_CRHB_INIT
-	str		r1, [r0, #CRG_CRHB]
-	ldr		r1, =CONFIG_SYS_CRG_CRAM_INIT
-	str		r1, [r0, #CRG_CRAM]
-
-/*
- * Initialize External Bus Interface
- */
-	ldr		r0, =MB86R0x_MEMC_BASE
-
-	ldr		r1, =CONFIG_SYS_MEMC_MCFMODE0_INIT
-	str		r1, [r0, #MEMC_MCFMODE0]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFMODE2_INIT
-	str		r1, [r0, #MEMC_MCFMODE2]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFMODE4_INIT
-	str		r1, [r0, #MEMC_MCFMODE4]
-
-	ldr		r1, =CONFIG_SYS_MEMC_MCFTIM0_INIT
-	str		r1, [r0, #MEMC_MCFTIM0]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFTIM2_INIT
-	str		r1, [r0, #MEMC_MCFTIM2]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFTIM4_INIT
-	str		r1, [r0, #MEMC_MCFTIM4]
-
-	ldr		r1, =CONFIG_SYS_MEMC_MCFAREA0_INIT
-	str		r1, [r0, #MEMC_MCFAREA0]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFAREA2_INIT
-	str		r1, [r0, #MEMC_MCFAREA2]
-	ldr		r1, =CONFIG_SYS_MEMC_MCFAREA4_INIT
-	str		r1, [r0, #MEMC_MCFAREA4]
-
-/*
- * Initialize DDR2 Controller
- */
-
-	/* Wait for PLL LOCK up time or more */
-	wait_timer	20
-
-	/*
-	 * (2) Initialize DDRIF
-	 */
-	ldr	r0, =MB86R0x_DDR2_BASE
-	ldr	r1, =CONFIG_SYS_DDR2_DRIMS_INIT
-	strh	r1, [r0, #DDR2_DRIMS]
-
-	/*
-	 * (3) Wait for 20MCKPs(120nsec) or more
-	 */
-	wait_timer	20
-
-	/*
-	 * (4) IRESET/IUSRRST release
-	 */
-	ldr	r0, =MB86R0x_CCNT_BASE
-	ldr	r1, =CONFIG_SYS_CCNT_CDCRC_INIT_1
-	str	r1, [r0, #CCNT_CDCRC]
-
-	/*
-	 * (5) Wait for 20MCKPs(120nsec) or more
-	 */
-	wait_timer	20
-
-	/*
-	 * (6) IDLLRST release
-	 */
-	ldr	r0, =MB86R0x_CCNT_BASE
-	ldr	r1, =CONFIG_SYS_CCNT_CDCRC_INIT_2
-	str	r1, [r0, #CCNT_CDCRC]
-
-	/*
-	 * (7+8) Wait for 200us(=200000ns) or more (DDR2 Spec)
-	 */
-	wait_timer	33536
-
-	/*
-	 * (9) MCKE ON
-	 */
-	ldr	r0, =MB86R0x_DDR2_BASE
-	ldr	r1, =CONFIG_SYS_DDR2_DRIC1_INIT
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_DRIC2_INIT
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =CONFIG_SYS_DDR2_DRCA_INIT
-	strh	r1, [r0, #DDR2_DRCA]
-	ldr	r1, =MB86R0x_DDR2_DRCI_INIT
-	strh	r1, [r0, #DDR2_DRIC]
-
-	/*
-	 * (10) Initialize SDRAM
-	 */
-
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	wait_timer	67			/* 400ns wait */
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_1
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_1
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_2
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_2
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_3
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_3
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_4
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_4
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_5
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_5
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	wait_timer 200
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_6
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_6
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_7
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_7
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	wait_timer	18			/* 105ns wait */
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_8
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_8
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	wait_timer	200			/* MRS to OCD: 200clock */
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_9
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_9
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC1_10
-	strh	r1, [r0, #DDR2_DRIC1]
-	ldr	r1, =CONFIG_SYS_DDR2_INIT_DRIC2_10
-	strh	r1, [r0, #DDR2_DRIC2]
-	ldr	r1, =MB86R0x_DDR2_DRCI_CMD
-	strh	r1, [r0, #DDR2_DRIC]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCM_INIT
-	strh	r1, [r0, #DDR2_DRCM]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCST1_INIT
-	strh	r1, [r0, #DDR2_DRCST1]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCST2_INIT
-	strh	r1, [r0, #DDR2_DRCST2]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCR_INIT
-	strh	r1, [r0, #DDR2_DRCR]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRCF_INIT
-	strh	r1, [r0, #DDR2_DRCF]
-
-	ldr	r1, =CONFIG_SYS_DDR2_DRASR_INIT
-	strh	r1, [r0, #DDR2_DRASR]
-
-	/*
-	 * (11) ODT setting
-	 */
-	ldr	r1, =CONFIG_SYS_DDR2_DROBS_INIT
-	strh	r1, [r0, #DDR2_DROBS]
-	ldr	r1, =CONFIG_SYS_DDR2_DROABA_INIT
-	strh	r1, [r0, #DDR2_DROABA]
-	ldr	r1, =CONFIG_SYS_DDR2_DRIBSODT1_INIT
-	strh	r1, [r0, #DDR2_DRIBSODT1]
-
-	/*
-	 * (12) Shift to ODTCONT ON (SDRAM side) and DDR2 usual operation mode
-	 */
-	ldr	r1, =CONFIG_SYS_DDR2_DROS_INIT
-	strh	r1, [r0, #DDR2_DROS]
-	ldr	r1, =MB86R0x_DDR2_DRCI_NORMAL
-	strh	r1, [r0, #DDR2_DRIC]
-
-	mov pc, lr
diff --git a/board/taskit/stamp9g20/Kconfig b/board/taskit/stamp9g20/Kconfig
index 3139f9af86..1121dacfc7 100644
--- a/board/taskit/stamp9g20/Kconfig
+++ b/board/taskit/stamp9g20/Kconfig
@@ -6,9 +6,6 @@ config SYS_BOARD
 config SYS_VENDOR
 	default "taskit"
 
-config SYS_SOC
-	default "at91"
-
 config SYS_CONFIG_NAME
 	default "stamp9g20"
 
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
index 1ddbb2c67c..722f9d57c4 100644
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -37,4 +37,20 @@ config NOR_BOOT
 	  booted via NOR.  In this case we will enable certain pinmux early
 	  as the ROM only partially sets up pinmux.  We also default to using
 	  NOR for environment.
+
+config DM
+	default y
+
+config DM_GPIO
+	default y if DM
+
+config DM_SERIAL
+	default y if DM
+
+config SYS_MALLOC_F
+	default y if DM
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if DM
+
 endif
diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c
index db96e347e7..3a7e04d542 100644
--- a/board/ti/beagle_x15/board.c
+++ b/board/ti/beagle_x15/board.c
@@ -47,7 +47,8 @@ static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
 	.sdram_config_init	= 0x61851b32,
 	.sdram_config		= 0x61851b32,
 	.sdram_config2		= 0x00000000,
-	.ref_ctrl		= 0x00001035,
+	.ref_ctrl		= 0x000040F1,
+	.ref_ctrl_final		= 0x00001035,
 	.sdram_tim1		= 0xceef266b,
 	.sdram_tim2		= 0x328f7fda,
 	.sdram_tim3		= 0x027f88a8,
@@ -103,7 +104,8 @@ static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
 	.sdram_config_init	= 0x61851b32,
 	.sdram_config		= 0x61851b32,
 	.sdram_config2		= 0x00000000,
-	.ref_ctrl		= 0x00001035,
+	.ref_ctrl		= 0x000040F1,
+	.ref_ctrl_final		= 0x00001035,
 	.sdram_tim1		= 0xceef266b,
 	.sdram_tim2		= 0x328f7fda,
 	.sdram_tim3		= 0x027f88a8,
diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
index 04ec675103..8892a2843d 100644
--- a/board/ti/ks2_evm/board.c
+++ b/board/ti/ks2_evm/board.c
@@ -35,12 +35,14 @@ static struct aemif_config aemif_configs[] = {
 
 int dram_init(void)
 {
-	ddr3_init();
+	u32 ddr3_size;
+
+	ddr3_size = ddr3_init();
 
 	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
 				    CONFIG_MAX_RAM_BANK_SIZE);
 	aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs);
-	ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE);
+	ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE, ddr3_size);
 	return 0;
 }
 
diff --git a/board/ti/ks2_evm/ddr3_k2e.c b/board/ti/ks2_evm/ddr3_k2e.c
index 40fd96607d..35ffb42056 100644
--- a/board/ti/ks2_evm/ddr3_k2e.c
+++ b/board/ti/ks2_evm/ddr3_k2e.c
@@ -11,11 +11,11 @@
 #include "ddr3_cfg.h"
 #include <asm/arch/ddr3.h>
 
-static int ddr3_size;
 static struct pll_init_data ddr3_400 = DDR3_PLL_400;
 
-void ddr3_init(void)
+u32 ddr3_init(void)
 {
+	u32 ddr3_size;
 	char dimm_name[32];
 
 	if (~(readl(KS2_PLL_CNTRL_BASE + KS2_RSTCTRL_RSTYPE) & 0x1))
@@ -43,13 +43,11 @@ void ddr3_init(void)
 		printf("DRAM: 4 GiB\n");
 		ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_4g);
 		ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_4g);
+	} else {
+		printf("Unknown SO-DIMM. Cannot configure DDR3\n");
+		while (1)
+			;
 	}
-}
 
-/**
- * ddr3_get_size - return ddr3 size in GiB
- */
-int ddr3_get_size(void)
-{
 	return ddr3_size;
 }
diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
index a1c3d05f8e..b36eb27bfa 100644
--- a/board/ti/ks2_evm/ddr3_k2hk.c
+++ b/board/ti/ks2_evm/ddr3_k2hk.c
@@ -12,14 +12,13 @@
 #include <asm/arch/ddr3.h>
 #include <asm/arch/hardware.h>
 
-static int ddr3_size;
-
 struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
 struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
 
-void ddr3_init(void)
+u32 ddr3_init(void)
 {
 	char dimm_name[32];
+	u32 ddr3_size;
 
 	ddr3_get_dimm_params(dimm_name);
 
@@ -93,12 +92,6 @@ void ddr3_init(void)
 	/* Apply the workaround for PG 1.0 and 1.1 Silicons */
 	if (cpu_revision() <= 1)
 		ddr3_err_reset_workaround();
-}
 
-/**
- * ddr3_get_size - return ddr3 size in GiB
- */
-int ddr3_get_size(void)
-{
 	return ddr3_size;
 }
diff --git a/board/ti/ks2_evm/ddr3_k2l.c b/board/ti/ks2_evm/ddr3_k2l.c
index 15a14f2aaf..00fc1943f5 100644
--- a/board/ti/ks2_evm/ddr3_k2l.c
+++ b/board/ti/ks2_evm/ddr3_k2l.c
@@ -11,28 +11,20 @@
 #include "ddr3_cfg.h"
 #include <asm/arch/ddr3.h>
 
-static int ddr3_size;
 static struct pll_init_data ddr3_400 = DDR3_PLL_400;
 
-void ddr3_init(void)
+u32 ddr3_init(void)
 {
 	init_pll(&ddr3_400);
 
 	/* No SO-DIMM, 2GB discreet DDR */
 	printf("DRAM: 2 GiB\n");
-	ddr3_size = 2;
 
 	/* Reset DDR3 PHY after PLL enabled */
 	ddr3_reset_ddrphy();
 
 	ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_2g);
 	ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_2g);
-}
 
-/**
- * ddr3_get_size - return ddr3 size in GiB
- */
-int ddr3_get_size(void)
-{
-	return ddr3_size;
+	return 2;
 }
diff --git a/board/ti/tnetv107xevm/Kconfig b/board/ti/tnetv107xevm/Kconfig
deleted file mode 100644
index 637f20e847..0000000000
--- a/board/ti/tnetv107xevm/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_TNETV107X_EVM
-
-config SYS_BOARD
-	default "tnetv107xevm"
-
-config SYS_VENDOR
-	default "ti"
-
-config SYS_SOC
-	default "tnetv107x"
-
-config SYS_CONFIG_NAME
-	default "tnetv107x_evm"
-
-endif
diff --git a/board/ti/tnetv107xevm/MAINTAINERS b/board/ti/tnetv107xevm/MAINTAINERS
deleted file mode 100644
index 8a92c6bf87..0000000000
--- a/board/ti/tnetv107xevm/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TNETV107XEVM BOARD
-#M:	Chan-Taek Park <c-park@ti.com>
-S:	Orphan (since 2014-06)
-F:	board/ti/tnetv107xevm/
-F:	include/configs/tnetv107x_evm.h
-F:	configs/tnetv107x_evm_defconfig
diff --git a/board/ti/tnetv107xevm/Makefile b/board/ti/tnetv107xevm/Makefile
deleted file mode 100644
index 0a6128f85f..0000000000
--- a/board/ti/tnetv107xevm/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y		+= sdb_board.o
diff --git a/board/ti/tnetv107xevm/config.mk b/board/ti/tnetv107xevm/config.mk
deleted file mode 100644
index 51c2886b34..0000000000
--- a/board/ti/tnetv107xevm/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-CONFIG_SYS_TEXT_BASE = 0x83FC0000
diff --git a/board/ti/tnetv107xevm/sdb_board.c b/board/ti/tnetv107xevm/sdb_board.c
deleted file mode 100644
index a84ec84bae..0000000000
--- a/board/ti/tnetv107xevm/sdb_board.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * TNETV107X-EVM: Board initialization
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <linux/mtd/nand.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/mux.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct async_emif_config async_emif_config[ASYNC_EMIF_NUM_CS] = {
-	{			/* CS0 */
-		.mode		= ASYNC_EMIF_MODE_NAND,
-		.wr_setup	= 5,
-		.wr_strobe	= 5,
-		.wr_hold	= 2,
-		.rd_setup	= 5,
-		.rd_strobe	= 5,
-		.rd_hold	= 2,
-		.turn_around	= 5,
-		.width		= ASYNC_EMIF_8,
-	},
-	{			/* CS1 */
-		.mode		= ASYNC_EMIF_MODE_NOR,
-		.wr_setup	= 2,
-		.wr_strobe	= 27,
-		.wr_hold	= 4,
-		.rd_setup	= 2,
-		.rd_strobe	= 27,
-		.rd_hold	= 4,
-		.turn_around	= 2,
-		.width		= ASYNC_EMIF_PRESERVE,
-	},
-	{			/* CS2 */
-		.mode		= ASYNC_EMIF_MODE_NOR,
-		.wr_setup	= 2,
-		.wr_strobe	= 27,
-		.wr_hold	= 4,
-		.rd_setup	= 2,
-		.rd_strobe	= 27,
-		.rd_hold	= 4,
-		.turn_around	= 2,
-		.width		= ASYNC_EMIF_PRESERVE,
-	},
-	{			/* CS3 */
-		.mode		= ASYNC_EMIF_MODE_NOR,
-		.wr_setup	= 1,
-		.wr_strobe	= 90,
-		.wr_hold	= 3,
-		.rd_setup	= 1,
-		.rd_strobe	= 26,
-		.rd_hold	= 3,
-		.turn_around	= 1,
-		.width		= ASYNC_EMIF_8,
-	},
-};
-
-static struct pll_init_data pll_config[] = {
-	{
-		.pll			= ETH_PLL,
-		.internal_osc		= 1,
-		.pll_freq		= 500000000,
-		.div_freq = {
-			5000000, 50000000, 125000000, 250000000, 25000000,
-		},
-	},
-};
-
-static const short sdio1_pins[] = {
-	TNETV107X_PIN_SDIO1_CLK_1,	TNETV107X_PIN_SDIO1_CMD_1,
-	TNETV107X_PIN_SDIO1_DATA0_1,	TNETV107X_PIN_SDIO1_DATA1_1,
-	TNETV107X_PIN_SDIO1_DATA2_1,	TNETV107X_PIN_SDIO1_DATA3_1,
-	-1
-};
-
-static const short uart1_pins[] = {
-	TNETV107X_PIN_UART1_RD, TNETV107X_PIN_UART1_TD, -1
-};
-
-static const short ssp_pins[] = {
-	TNETV107X_PIN_SSP0_0, TNETV107X_PIN_SSP0_1, TNETV107X_PIN_SSP0_2,
-	TNETV107X_PIN_SSP1_0, TNETV107X_PIN_SSP1_1, TNETV107X_PIN_SSP1_2,
-	TNETV107X_PIN_SSP1_3, -1
-};
-
-int board_init(void)
-{
-#ifndef CONFIG_USE_IRQ
-	__raw_writel(0, INTC_GLB_EN);		/* Global disable       */
-	__raw_writel(0, INTC_HINT_EN);		/* Disable host ints    */
-	__raw_writel(0, INTC_EN_CLR0 + 0);	/* Clear enable         */
-	__raw_writel(0, INTC_EN_CLR0 + 4);	/* Clear enable         */
-	__raw_writel(0, INTC_EN_CLR0 + 8);	/* Clear enable         */
-#endif
-
-	gd->bd->bi_arch_number = MACH_TYPE_TNETV107X;
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	init_plls(ARRAY_SIZE(pll_config), pll_config);
-
-	init_async_emif(ARRAY_SIZE(async_emif_config), async_emif_config);
-
-	mux_select_pin(TNETV107X_PIN_ASR_CS3);
-	mux_select_pins(sdio1_pins);
-	mux_select_pins(uart1_pins);
-	mux_select_pins(ssp_pins);
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-#ifdef CONFIG_NAND_DAVINCI
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-
-	return 0;
-}
-#endif