update arm/at91rm9200 work with rework rework110202

* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
 * Fix: timer.c compile error io.h not found with arm/at91rm9200
 * update arm920t/at91 to ATMEL_xxx name scheme
 * update arm920t/at91 soc lib
 * update at91_emac driver

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Tested-by: Andreas Bießmann <andreas.devel@gmail.com>

3 files changed, 40 insertions, 38 deletions

diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c
index fe62a0fcaf..e9a1cb276c 100644
--- a/board/BuS/eb_cpux9k2/cpux9k2.c
+++ b/board/BuS/eb_cpux9k2/cpux9k2.c
@@ -57,12 +57,12 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_init(void)
 {
-	at91_pio_t *pio	= (at91_pio_t *) AT91_PIO_BASE;
+	at91_pio_t *pio	= (at91_pio_t *) ATMEL_BASE_PIO;
 	/* Enable Ctrlc */
 	console_init_f();
 
 	/* Correct IRDA resistor problem / Set PA23_TXD in Output */
-	writel(AT91_PMX_AA_TXD2, &pio->pioa.oer);
+	writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
 
 	gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
 	/* adress of boot parameters */
@@ -147,7 +147,7 @@ int dram_init(void)
 int board_eth_init(bd_t *bis)
 {
 	int rc = 0;
-	rc = at91emac_register(bis, (u32) AT91_EMAC_BASE);
+	rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
 	return rc;
 }
 #endif
@@ -164,9 +164,9 @@ int board_eth_init(bd_t *bis)
 void cpux9k2_nand_hw_init(void)
 {
 	unsigned long csr;
-	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
-	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-	at91_mc_t *mc = (at91_mc_t *) AT91_MC_BASE;
+	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+	at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
 
 	/* Setup Smart Media, fitst enable the address range of CS3 */
 	writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa);
@@ -178,23 +178,23 @@ void cpux9k2_nand_hw_init(void)
 		AT91_SMC_CSR_WSEN;
 	writel(csr, &mc->smc.csr[3]);
 
-	writel(AT91_PMX_CA_SMOE | AT91_PMX_CA_SMWE, &pio->pioc.asr);
-	writel(AT91_PMX_CA_BFCK | AT91_PMX_CA_SMOE | AT91_PMX_CA_SMWE,
+	writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
+	writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE,
 		&pio->pioc.pdr);
 
 	/* Configure PC2 as input (signal Nand READY ) */
-	writel(AT91_PMX_CA_BFAVD, &pio->pioc.per);
-	writel(AT91_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
-	writel(AT91_PMX_CA_BFCK, &pio->pioc.codr);
+	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
+	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
+	writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);
 
 	/* PIOC clock enabling */
-	writel(1 << AT91_ID_PIOC, &pmc->pcer);
+	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
 }
 
 static void board_nand_hwcontrol(struct mtd_info *mtd,
 	int cmd, unsigned int ctrl)
 {
-	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 	struct nand_chip *this = mtd->priv;
 	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
 
@@ -219,7 +219,7 @@ static void board_nand_hwcontrol(struct mtd_info *mtd,
 
 static int board_nand_dev_ready(struct mtd_info *mtd)
 {
-	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 	return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
 }
 
@@ -248,8 +248,8 @@ int drv_video_init(void)
 #endif
 	char *s;
 	unsigned long csr;
-	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-	at91_mc_t *mc = (at91_mc_t *) AT91_MC_BASE;
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+	at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
 
 	printf("Init Video as ");
 	s = getenv("displaywidth");
@@ -270,7 +270,7 @@ int drv_video_init(void)
 		AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
 		AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
 	writel(csr, &mc->smc.csr[2]);
-	writel(1 << AT91_ID_PIOB, &pmc->pcer);
+	writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
 
 	vcxk_init(display_width, display_height);
 #ifdef CONFIG_SPLASH_SCREEN
@@ -290,11 +290,11 @@ int drv_video_init(void)
 void i2c_init_board(void)
 {
 	u32 pin;
-	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 
-	writel(1 << AT91_ID_PIOA, &pmc->pcer);
-	pin = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK;
+	writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
+	pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK;
 	writel(pin, &pio->pioa.idr);
 	writel(pin, &pio->pioa.pudr);
 	writel(pin, &pio->pioa.per);
@@ -310,7 +310,7 @@ void i2c_init_board(void)
 
 void __led_toggle(led_id_t mask)
 {
-	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 
 	if (readl(&pio->piod.odsr) & mask)
 		writel(mask, &pio->piod.codr);
@@ -320,10 +320,10 @@ void __led_toggle(led_id_t mask)
 
 void __led_init(led_id_t mask, int state)
 {
-	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 
-	writel(1 << AT91_ID_PIOD, &pmc->pcer);	/* Enable PIOB clock */
+	writel(1 << ATMEL_ID_PIOD, &pmc->pcer);	/* Enable PIOB clock */
 	/* Disable peripherals on LEDs */
 	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
 	/* Enable pins as outputs */
@@ -336,7 +336,7 @@ void __led_init(led_id_t mask, int state)
 
 void __led_set(led_id_t mask, int state)
 {
-	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 	if (state == STATUS_LED_ON)
 		writel(mask, &pio->piod.codr);
 	else
diff --git a/board/atmel/at91rm9200ek/at91rm9200ek.c b/board/atmel/at91rm9200ek/at91rm9200ek.c
index d242583e37..5ebc24d26e 100644
--- a/board/atmel/at91rm9200ek/at91rm9200ek.c
+++ b/board/atmel/at91rm9200ek/at91rm9200ek.c
@@ -44,7 +44,7 @@ int board_init(void)
 	 * Correct IRDA resistor problem
 	 * Set PA23_TXD in Output
 	 */
-	writel(AT91_PMX_AA_TXD2, &pio->pioa.oer);
+	writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
 
 	/* arch number of AT91RM9200EK-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200EK;
@@ -65,6 +65,6 @@ int dram_init (void)
 #ifdef CONFIG_DRIVER_AT91EMAC
 int board_eth_init(bd_t *bis)
 {
-	return at91emac_register(bis, (u32) AT91_EMAC_BASE);
+	return at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
 }
 #endif
diff --git a/board/atmel/at91rm9200ek/led.c b/board/atmel/at91rm9200ek/led.c
index 8d512e0329..1766ddf68a 100644
--- a/board/atmel/at91rm9200ek/led.c
+++ b/board/atmel/at91rm9200ek/led.c
@@ -26,8 +26,10 @@
  */
 
 #include <common.h>
-#include <asm/arch/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
 #include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pio.h>
 
 /* bit mask in PIO port B */
 #define	GREEN_LED	(1<<0)
@@ -36,47 +38,47 @@
 
 void	green_LED_on(void)
 {
-	at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
 	writel(GREEN_LED, &pio->piob.codr);
 }
 
 void	 yellow_LED_on(void)
 {
-	at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
 	writel(YELLOW_LED, &pio->piob.codr);
 }
 
 void	 red_LED_on(void)
 {
-	at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
 	writel(RED_LED, &pio->piob.codr);
 }
 
 void	green_LED_off(void)
 {
-	at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
 	writel(GREEN_LED, &pio->piob.sodr);
 }
 
 void	yellow_LED_off(void)
 {
-	at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
 	writel(YELLOW_LED, &pio->piob.sodr);
 }
 
 void	red_LED_off(void)
 {
-	at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
 	writel(RED_LED, &pio->piob.sodr);
 }
 
 void coloured_LED_init (void)
 {
-	at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE;
-	at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
+	at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
+	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
 
 	/* Enable PIOB clock */
-	writel(1 << AT91_ID_PIOB, &pmc->pcer);
+	writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
 
 	/* Disable peripherals on LEDs */
 	writel(GREEN_LED | YELLOW_LED | RED_LED, &pio->piob.per);