apalis_t30: fix optional pcie port reset for reliable pcie operation

Allow optionally bringing up the Apalis type specific 4 lane PCIe port
as well as the PCIe switch as found on the Apalis Evaluation board. In
order to avoid violating the PCIe reset timing do this by overriding the
tegra_pcie_board_port_reset() function. Note however that both the
Apalis type specific 4 lane PCIe port as well as the regular Apalis PCIe
port are also left disabled in the device tree by default.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

2 files changed, 65 insertions, 1 deletions

diff --git a/board/toradex/apalis_t30/Kconfig b/board/toradex/apalis_t30/Kconfig
index 16224daa12..9cd497091d 100644
--- a/board/toradex/apalis_t30/Kconfig
+++ b/board/toradex/apalis_t30/Kconfig
@@ -25,6 +25,15 @@ config TDX_CFG_BLOCK_PART
 config TDX_CFG_BLOCK_OFFSET
 	default "-512"
 
+config APALIS_T30_PCIE_EVALBOARD_INIT
+	bool "Apalis Evaluation Board PCIe Initialisation"
+	help
+	  Bring up the Apalis type specific 4 lane PCIe port as well as the
+	  Apalis PCIe port with the PCIe switch as found on the Apalis
+	  Evaluation board. Note that by default both those ports are also left
+	  disabled in the device tree which needs changing as well for this to
+	  actually work.
+
 source "board/toradex/common/Kconfig"
 
 endif
diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c
index 28830b6345..ace9c5b168 100644
--- a/board/toradex/apalis_t30/apalis_t30.c
+++ b/board/toradex/apalis_t30/apalis_t30.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- *  (C) Copyright 2014-2016
+ *  (C) Copyright 2014-2018
  *  Marcel Ziswiler <marcel@ziswiler.com>
  */
 
@@ -13,6 +13,7 @@
 #include <asm/io.h>
 #include <dm.h>
 #include <i2c.h>
+#include <pci_tegra.h>
 #include "../common/tdx-common.h"
 
 #include "pinmux-config-apalis_t30.h"
@@ -22,6 +23,13 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PMU_I2C_ADDRESS		0x2D
 #define MAX_I2C_RETRY		3
 
+#ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT
+#define PEX_PERST_N	TEGRA_GPIO(S, 7) /* Apalis GPIO7 */
+#define RESET_MOCI_CTRL	TEGRA_GPIO(I, 4)
+
+static int pci_reset_status;
+#endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */
+
 int arch_misc_init(void)
 {
 	if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
@@ -106,6 +114,53 @@ int tegra_pcie_board_init(void)
 		return err;
 	}
 
+#ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT
+	gpio_request(PEX_PERST_N, "PEX_PERST_N");
+	gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL");
+#endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */
+
 	return 0;
 }
+
+void tegra_pcie_board_port_reset(struct tegra_pcie_port *port)
+{
+	int index = tegra_pcie_port_index_of_port(port);
+
+	if (index == 2) { /* I210 Gigabit Ethernet Controller (On-module) */
+		tegra_pcie_port_reset(port);
+	}
+#ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT
+	/*
+	 * Apalis PCIe aka port 1 and Apalis Type Specific 4 Lane PCIe aka port
+	 * 0 share the same RESET_MOCI therefore only assert it once for both
+	 * ports to avoid losing the previously brought up port again.
+	 */
+	else if ((index == 1) || (index == 0)) {
+		/* only do it once per init cycle */
+		if (pci_reset_status % 2 == 0) {
+			/*
+			 * Reset PLX PEX 8605 PCIe Switch plus PCIe devices on
+			 * Apalis Evaluation Board
+			 */
+			gpio_direction_output(PEX_PERST_N, 0);
+			gpio_direction_output(RESET_MOCI_CTRL, 0);
+
+			/*
+			 * Must be asserted for 100 ms after power and clocks
+			 * are stable
+			 */
+			mdelay(100);
+
+			gpio_set_value(PEX_PERST_N, 1);
+			/*
+			 * Err_5: PEX_REFCLK_OUTpx/nx Clock Outputs is not
+			 * Guaranteed Until 900 us After PEX_PERST# De-assertion
+			 */
+			mdelay(1);
+			gpio_set_value(RESET_MOCI_CTRL, 1);
+		}
+		pci_reset_status++;
+	}
+#endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */
+}
 #endif /* CONFIG_PCI_TEGRA */